Произошла устранимая аппаратная ошибка компонент память источник ошибки unknown error source

Сервер WIN 2008 R2 Standart, Motherboard TYAN S8230GM4NR, CPU - AMD Opteron 6172, RAM 32 GB
  • Remove From My Forums
  • Вопрос

  • Сервер WIN 2008 R2 Standart, Motherboard TYAN S8230GM4NR, CPU — AMD Opteron 6172, RAM 32 GB

    После установки обновлений в системе начала появляться ошибка WHEA-Logger error code 47

    Согласно MSDN ошибка памяти, память полностью заменили, но на ошибку это не повлияло, после перезагрузки ошибка исчезает, но через 2-3 часа работы появляется снова, обновление BIOS и перенастройка схемы электропитания результатов не дали, после появления
    ошибки постепенно падает производительность системы с последующим зависанием сервера, при этом на win 2003 r2 этот же сервер работает нормально без сбоев, лицензия позволяет перейти на 2003-й, но по ряду причин это не возможно. До установки обновлений
    проблемы не было.

    Код ошибки:

    Произошла устранимая аппаратная ошибка.

    Компонент: память
    Источник ошибки: Исправленная ошибка проверки компьютера

    [ Name] Microsoft-Windows-WHEA-Logger
    [ Guid] {C26C4F3C-3F66-4E99-8F8A-39405CFED220}
    Keywords 0x8000000000000000
    [ SystemTime] 2012-08-18T12:31:11.797962000Z
    [ ActivityID] {83A563F9-DA85-4948-8715-9B573D980251}
    [ ProcessID] 800
    [ ThreadID] 7256
    FRUId {00000000-0000-0000-0000-000000000000}
    PhysicalAddress 0x2e1162be0
    RawData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

Ответы

  • Судя по информации из сообщения у Вас исправимая машинная ошибка, обнаруженная  в процессоре.

    Обращайтесь к поставщику сервера. MS за ваше битое железо не отвечает.


    Слава России!

    • Помечено в качестве ответа

      28 сентября 2012 г. 9:02

  • Из вашей ссылки:

    Beginning with Windows Server 2008 and Windows Vista SP1, when a hardware error occurs, the operating system creates an

    error record that describes the error condition and sends an event tracing for Windows (ETW) event that contains the error record to user mode.

    Именно поэтому

    … при этом на win 2003 r2 этот же сервер работает нормально без сбоев

    На Windows Server 2003 R2 точно не отмечается никаких внешних проявлений проблемы? Вы проверяли на 32- или на 64-битном Windows Server 2003?

    • Изменено
      osr_MVP
      11 сентября 2012 г. 7:09
    • Помечено в качестве ответа
      Yuriy Lenchenkov
      28 сентября 2012 г. 9:02

My HP Z820 workstation (BIOS v. 3.52) encounters prolonged periods of extremely frequent (several times each second) System Warnings in Windows 7 64-bit Event Viewer: (here is part of it)

Log Name:      System
Source:        Microsoft-Windows-WHEA-Logger
Date:          03/01/2014 18:11:16
Event ID:      47
Task Category: None
Level:         Warning
Keywords:     
User:          LOCAL SERVICE
Computer:      ******
Description:
A corrected hardware error has occurred.

Component: Memory
Error Source: Corrected Machine Check

 When it first happened in June 2013 it lasted for more than a month. The System Event Viewer archive filled up with all those repeated warnings (>100 GBytes in all!). Sometimes it was accompanied by BIOS error messages during start-up:

942 Memory Training Error DIMM 8 on CPU1 experienced an error during training (Code 301C).

It offered to press F1 to boot.

Then the Z820 began failing to boot or restart, and finally HP local support replaced 2 of my four 8-GByte memory units. It helped for a few months.

Last week WHEA-logger Event ID: 47 reappeared in full presence and already filled 1.7 GBytes of System Event Viewer archive. Sometimes it is inactive but then the warnings reappear. (without 942 errors this time… and no problem at boot time — yet.)

The Advisory blames Intel Xeon E7-8800/4800/2800 processors for this and offers a workaround by modifying «Minimum Processor Idle Power Package State — Package C3 State» Using the ROM-Based Setup Utility (RBSU) in the ProLiant DL580 G7 series servers BIOS.

So, my questions are:

1. Is the WHEA-logger Event ID: 47 in my Z820 related to the peculiar behavior of the dual Intel Xeon processors — in this case the initial E5-2670 type, not E7 — installed in Z820, and not a real memory hardware fault?

2. How do I apply this workaround in Z820 BIOS, where the BIOS Setup (F10) OS Power Management options are different from those in the HP Proliant Server Support Advisory?

Please advise.

My HP Z820 workstation (BIOS v. 3.52) encounters prolonged periods of extremely frequent (several times each second) System Warnings in Windows 7 64-bit Event Viewer: (here is part of it)

Log Name:      System
Source:        Microsoft-Windows-WHEA-Logger
Date:          03/01/2014 18:11:16
Event ID:      47
Task Category: None
Level:         Warning
Keywords:     
User:          LOCAL SERVICE
Computer:      ******
Description:
A corrected hardware error has occurred.

Component: Memory
Error Source: Corrected Machine Check

 When it first happened in June 2013 it lasted for more than a month. The System Event Viewer archive filled up with all those repeated warnings (>100 GBytes in all!). Sometimes it was accompanied by BIOS error messages during start-up:

942 Memory Training Error DIMM 8 on CPU1 experienced an error during training (Code 301C).

It offered to press F1 to boot.

Then the Z820 began failing to boot or restart, and finally HP local support replaced 2 of my four 8-GByte memory units. It helped for a few months.

Last week WHEA-logger Event ID: 47 reappeared in full presence and already filled 1.7 GBytes of System Event Viewer archive. Sometimes it is inactive but then the warnings reappear. (without 942 errors this time… and no problem at boot time — yet.)

The Advisory blames Intel Xeon E7-8800/4800/2800 processors for this and offers a workaround by modifying «Minimum Processor Idle Power Package State — Package C3 State» Using the ROM-Based Setup Utility (RBSU) in the ProLiant DL580 G7 series servers BIOS.

So, my questions are:

1. Is the WHEA-logger Event ID: 47 in my Z820 related to the peculiar behavior of the dual Intel Xeon processors — in this case the initial E5-2670 type, not E7 — installed in Z820, and not a real memory hardware fault?

2. How do I apply this workaround in Z820 BIOS, where the BIOS Setup (F10) OS Power Management options are different from those in the HP Proliant Server Support Advisory?

Please advise.

December 16 2014, 09:51

Category:

  • IT
  • Cancel

Проблемы с памятью

Добрый день, господа. Второй день мучаюсь проблемой:
имеется сервер с материнкой gigabyte GA-6PXSV3  (биос версии r8)  в нее воткнуты  4 планки памяти IBM 43W9453  по 8 гиг. на сервере: 2008r2  + MSSQL  с ббазой в 5 гиг и вебсервисом локальным, акронис 11.5

Когда все 4 планки установлены, при выполнении малейшей задачи (копирование файлов, запуск приложения и т.д.) начинает сыпаться ошибка памяти:

Event ID: 47  WHEA-Logger

A corrected hardware error has occurred.

Component: Memory

Error Source: Corrected Machine Check

The details view of this entry contains further information.

FRUId {00000000-0000-0000-0000-000000000000}
RawData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

Запись падает в лог сначала в виде предупреждения, потом в виде ошибки, потом, есесьна БСОД.
Когда убираешь 2 планки, (оставляешь 2 соответственно) -система работает на ура. данная ошибка проскакивает ОЧЕНь редко(но проскакивает) — от нагрузки не зависит.

Скьюлю использование памяти ограничено, установлены последние дрова на систему и все обновления,  потребление памяти и загрузка процессора — в низовых пределах.
Пробовал разные настройки биоса, разные режимы работы памяти ( мирроринг, индепендед  и т.д.), пробовал дефолтный биос, менял память местами, пробовал разщные слоты.
По советам из гоогления ставил настройки питания в хайперфоманс в системе и в биосе.
Мемтест86 и виндовый мемтест проходил для всей памяти сразу и по-отдельности —  без ошибок.
БП поменян на новый и более мощный.
Память резинками терта, на дефекты осмотрена  и слоты на материнке кисточками чищены и продуты.

Кто сталкивался с подобным? Это что? винда? железо? брак материнки, недостаточное питание памяти или несовместимость?

Зараннее спасибо.

Понравилась статья? Поделить с друзьями:

Читайте также:

  • Произошла устранимая аппаратная ошибка компонент память источник ошибки corrected machine check
  • Произошла ошибка при создании персонажа вк
  • Произошла устранимая аппаратная ошибка whea logger 47
  • Произошла ошибка при создании медиафайла untitled mp4
  • Произошла устраненная аппаратная ошибка whea logger 47

  • 0 0 голоса
    Рейтинг статьи
    Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии