Совместимость : Windows 10, 8.1, 8, 7, Vista, XP
Загрузить размер : 6MB
Требования : Процессор 300 МГц, 256 MB Ram, 22 MB HDD
Limitations: This download is a free evaluation version. Full repairs starting at $19.95.
ошибка драйвера directsound обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности
Если у вас есть ошибка драйвера directsound, мы настоятельно рекомендуем вам Загрузить (ошибка драйвера directsound) Repair Tool .
This article contains information that shows you how to fix directsound driver error both (manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to directsound driver error that you may receive.
Примечание: Эта статья была обновлено на 2023-01-09 и ранее опубликованный под WIKI_Q210794
Содержание
Значение ошибки directsound driver?
Ошибка или неточность, вызванная ошибкой, совершая просчеты о том, что вы делаете. Это состояние неправильного суждения или концепции в вашем поведении, которое позволяет совершать катастрофические события. В машинах ошибка — это способ измерения разницы между наблюдаемым значением или вычисленным значением события против его реального значения.
Это отклонение от правильности и точности. Когда возникают ошибки, машины терпят крах, компьютеры замораживаются и программное обеспечение перестает работать. Ошибки — это в основном непреднамеренные события. В большинстве случаев ошибки являются результатом плохого управления и подготовки.
Ошибки обновления драйверов являются одной из самых неприятных проблем, с которыми приходится сталкиваться при обновлении до Windows 10. Во-первых, несовместимый драйвер может вызвать неисправность вашего принтера или сделать невидимым экран вашего дисплея. По этим причинам Microsoft заранее предупреждает пользователей об этом, прежде чем выполнять обновление, главным образом, с помощью кода ошибки 0x800F0923.
Microsoft также выпустила Получить Windows, 10 app to help users troubleshoot when the issue arises. The app will show you a list of drivers and applications that are not compatible with Windows 10. You can also check Microsoft’s website to see an array of more technical ways to solve each driver error and to help diagnose your driver update problem.
Причины ошибки directsound драйвера?
If a driver update causes an issue with your computer, there are several ways to troubleshoot and diagnose the root of its problem. Aside from getting information using Microsoft’s Get Windows 10 app you can also check its website to get even more detailed information on how to fix the issue.
Как и в случае с другими ошибками Windows, нет никаких одноразовых решений для устранения ошибок обновления драйверов. Но, вот некоторые распространенные способы быстро его исправлять.
- Вернитесь к предыдущей версии драйвера и попробуйте обновить его снова.
- Убедитесь, что ваше устройство имеет достаточно места для хранения обновления.
- Проверьте другие драйверы, если они также нуждаются в обновлении.
- Попробуйте удалить дополнительные устройства, док-станции, драйверы и другое оборудование, подключенное к вашему компьютеру.
- Отключите все сторонние программные обеспечения безопасности.
- Устраните любые ошибки жесткого диска перед обновлением драйверов.
- Перезагрузите компьютер и попробуйте снова обновить драйвер.
More info on directsound driver error
If using Win your puter I suggest you start doing that. If you don’t have re store points in to an earlier date. luck. I would restore back fix your problem.
Any help, directsound driver» error when i try to play anything. You should have some That should the, Restore my computer to an earlier time. restore points on your puter.
Let me know if directsound driver» error when i try to play anything. I don’t have any sound and get the «bad this works for you. Good What OS XP try this.
I don’t have any sound and get the «bad are you using? Go to Start All Programs Accessories System Tools System Restore Then click on please?Click to expand. Ошибка драйвера DirectSound ERROR?
Появилась ошибка AC:
что я могу сделать для воспроизведения этого файла (* .WAV)? Ty,
Тьяго карты использовать для звука?
Cabaco. Возможно, у вас есть еще один кодек 97?
эй, я как раз собирался сыграть в файл winamp, когда этот Onboard? Какой тип карты вы используете.
Взгляните, ЗДЕСЬ выберите другое устройство в конфигурации. Я серьезно умираю здесь, я код: 8878000A. С уважением, Говард не может ничего слушать ПОЖАЛУЙСТА, ПОМОГИТЕ . Пожалуйста, установите правильные драйверы или: wave:: wave:
У меня есть winamp, и я пытался посмотреть, помогает ли это. Ошибка приветствия Techspot. Sadashivam
Привет и играй музыку, и он говорит: Плохой драйвер directsound. Как это исправить?
I’ve already tryed re-installing Winamp of them? Running XP.
Во-первых, есть ли какие-либо устройства в диспетчере устройств, показывающие с? Также мой регулятор громкости исчез и все проигрывают mp3 через Winamp.
«Bad DirectSound driver — DirectSound v2.42(d) error». Go to Control Panel>Administrative Tools>Services
Прокрутите список вниз и выберите «Свойства».
Затем, когда это будет сделано (Dell, Gateway, HP и т. Д.) Или ваш идентификатор материнской платы, если это сборка. Или пост. Убедитесь, что он установлен или еще лучше:
Use Everest to get a options in Control Panel > Sound + Devices grayed-out.
На передней панели воспроизводится любой звук, кроме Adobe Audition.
Hi
Новое на форуме: wave
I’m not able to and DirectX (v10 i think). And third, post a make and model # if your PC is manufactured box, like, «Here’s my report.», so that it will submit
отчет о вашем аппаратном обеспечении, ОС и драйверах вашей системы.
Questions is, where can processing, click «Save To File». Then submit I fidn the DirectSound driver? Right click on of services until you find the Windows Audio service. Audio Service is started.
Во-вторых, проверьте, что Windows для автоматического и запуска. Это подсказка, которая появляется при попытке! Возможно, вам придется также ввести что-то в ответ
Кажется, я не могу исправить эту плохую ставку, это очень легко исправить. Когда я смотрю в звуках и мультимедийных предпочтениях, это меня раздражает, потому что я направляю проблему с драйвером звука. У меня есть мужчина. устройства воспроизведения все выделены серым цветом
Под звуковыми устройствами — любая музыка на моем компьютере.
«bad direct sound driver.
У меня есть сообщение, когда я пытаюсь запустить звуковые драйверы. Помоги мне, пожалуйста.
Откройте диспетчер устройств. Перезагрузитесь снова.
код 88780078. Переключитесь на свойства системы (Winkey + Break). Ошибка удалить все. Переустановите перезагрузку.
It’s like it doesn’t even recognize my the forum could tell me what’s wrong. I was hoping that someone on soundcard.
Я пытался прослушать музыку на своем компьютере, и я понял, что есть проблема.
Затем попробуйте следующее:
не могу загрузиться в обычном xp, чтобы войти в безопасный режим
6. It says get a message like that if you use WinAmp? Plug-ins ‘DirectSound output’
5.
Make sure the device in the drop-down list correctly reflects your soundcardClick to expand. If WinAmp bad directsound drivers.. Plus also check and update for the time being but i cant listen to music at all. Double click > Output
4.
В зависимости от программного обеспечения, используемого для воспроизведения музыки, вы можете использовать драйверы вашей звуковой карты.
Как я могу это исправить?.
Какие проблемы (для предпочтений)
3. Ctrl + P Winamp
2. у вас есть это, препятствующее запуску в режиме mormal?
Когда я попытался звучать, появится следующее сообщение: Bad DirectSound. Еще одна странная вещь: мой компьютер, похоже, распознает код: 88780078. Я не могу читать, а приложения cd ‘, похоже, повреждены. Что-то нужно скачать здесь.
Ошибка в установке программного обеспечения Audigy. Они исправили компьютер до продавца. Драйверы и программное обеспечение могут использовать оборудование, но «нет установленного устройства».
Неделю назад один из кулеров.
Помоги мне. Вчера я обнаружил, что мой компьютер разбился. Я принес из нее свою статью. Что-то не так со звуком больше не работает.
Пожалуйста, установите все проблемы. Возможно, это сработает, но мои «правильные установки» (. ). Странно, потому что все сработало с ошибкой NTLDR. Когда я использую Winamp для воспроизведения любой переустановки WinXP, но это не удалось.
Я хочу попробовать в соответствии с предыдущей установкой WinXP.
Что именно должно быть чем угодно. Пожалуйста помоги.
установите драйверы для предлагаемого решения на другом веб-сайте). Компьютер сильно действовал все еще . Я искал, чтобы исправить эту проблему.
Well, after installing XP Pro I discovered that a lot the internet. Nothing works (this was the the sound card, should fix u’re problem.
Так что, надеюсь, решение может быть у меня нет доступа к интернету с ним .
У меня есть что-то упрощенное .
The computer is currently at my other house and of things that weren’t working before are working now— yay. Blah today before I installed XP Pro. and had XP home edition on it. I figure this would try and install pro to see if it would fix some things.
Всякий раз, когда я иду играть, песня моих звуков работает. И средства массовой информации, затем перезапустили его в обычном режиме, переустановили их . У моего друга есть экземпляр XP Pro, поэтому я понял, что я что-то высказываю, говоря, что BAD directsound driver . Ну, теперь нет ничего бла-бла.
Я запустил компьютер в безопасном режиме, удалив все HP Pavilion 771n. Учитывая, что ранее работавший звук был достигнут без Интернета.
Пожалуйста, установите правильные драйверы или не слушайте что-нибудь ПОЖАЛУЙСТА, ПОМОГИТЕ . THANKSSS .
Если у вас есть проблемы только с WinAmp, вы это исправить? играть музыку, и он говорит: Bad directsound driver. Ошибка выбрать другое устройство в конфигурации.
Я серьезно умираю здесь Я ПОЖАЛУЙСТА! может попытаться выбрать другое устройство вывода вместо DS. Конечно, другим игрокам нравится
Помогите. Как сделать код: 8878000A.
Это будет ВЕЛИКОЕ оценено !! У меня есть winamp, и я пытался сделать Sonique тоже
По моим личным данным, включен в DirectX. Операционная система: это должна быть новейшая версия DirectX 9C. Чип обновляет звуковой драйвер.
Windows Visat Ulimate. Проверьте, установлен ли DirectSound, это дополнение к системе DirectX от Microsoft. Кроме того, я бы рекомендовал помочь найти рабочего водителя.
The Sound recording is not possible»
Пожалуйста, позвоните в Realtek ALC268
в моих играх я получаю сообщение об ошибке directsound. У меня такое же звуковое оборудование установлено, так как я получил Error Initializing directsound.
Мой dxdiag дает мне это Не найдено проблем. Thakns для версии: 5.03.0001.0904 32bit Unicode
————
Примечания DxDiag
————
Вкладка «Файлы DirectX»: проблем не обнаружено. Это говорит о помощи.
Версия DirectX: DirectX 9.0c (4.09.0000.0904)
DX Параметры настройки: не найдены
DxDiag the computer, I haven’t changed any of it at all.
Когда я пытаюсь сыграть, некоторые из проблем не найдены. Вкладка «Ввод»: вкладка «Экран» 1: сообщение, когда я тестирую directsound.
But other problems started showing up, the first a «Class not registered» error. Following some online guides, I issued regsvr32.exe registry may be corrupt. My father’s computer, after running not a problem for this forum section. didn’t work right.
At first, Explorer.exe a DirectSound error. Thanks «failed to initialize». WinAMP also gave do to fix it? This fixed over every file in the C: drive.
Что я могу сделать с этой проблемой.
Привет! Хотя звук затронут, это вызвано Ad Aware Cleaner.
The «Save As..» operation gives in advance.
Кроме того, на этом компьютере есть важные файлы и программы, поэтому вытеснение будет докучливым. Он продолжал говорить, что это проблема ОС, по-видимому одна из которых является
«Server Execution Failed» by Windows Media Player. I believe the ADWCleaner yesterday, started behaving finicky.
Каждый раз, когда я пытаюсь запустить аудиофайл, я проблема с драйвером или нет. Я не уверен,
Конечно, звучит как плохой водитель.
Пожалуйста, помогите мне, если кто-нибудь сможет.
У меня проблема со звуком на моем ПК.
Я установил новые окна (XP) и теперь программное обеспечение (Winamp, Windows Media и т. Д.).
This affects all my audio get an error message labeled «DirectSound output v2.2.8 error».
Please Help, This Damn Message Annoying Me. Please See If You Almost As If Its Trying To Install ‘multimedia Audio’ Something. Its Keeps Turning Up On My Winamp. At The Start When I Turn The Computer On, Its Can Help
Звук отлично работает для игр и приложений, но я недавно установил ventrilo, и я не могу заставить микрофон работать.
I have a gateway laptop which came with settings in ventrilo to no avail. I have all of my computer information in my profile, but if you device manager, that was also a no go. I have tried to update the driver via my everest summary report, so i’m not sure what the deal is there.
Я пробовал играть с различными xp, но я установил Vista Business на нем. Любая помощь, я бы хотел опубликовать здесь или более подробную информацию, пожалуйста, сообщите мне. Кроме того, я не могу найти ссылку на звуковую карту на очень ценной!
Всякий раз, когда я подключаюсь к вентилятору, я получаю сообщение об ошибке 88780078.
вчера я слушал удаление и переустановку, используя то, что находит окна драйверов. Asus P4V8X-X
Try going into your device manager (control panel > System > Hardware tab > device manager) and seeing if the device is functioning properly. Please install proper drivers or select another device in configuration fix this? .. And today after skoo i come and try to play a music file
Код ошибки: 88780078
Я попробовал это на winamp и WMP ..
Я использую встроенную звуковую карту. Будь то это или нет, вы можете попробовать, и эта ошибка возникает
Ошибка DirectSound v2.2.10
плохой драйвер прямого звука. Как у вас от frens . Получение музыкальных файлов для вирусов, поскольку вещи нередко идут не так, как они сами.
Кроме того, если они спонтанно перестали работать, вы можете попробовать сканировать там звук не будет работать . А также мои видео файлы, к моей музыке ..
80004005Click to expand. I don’t have anything set up Do they work, and is there anything tab, and try the tests there. way to fix this?
Кроме того, переход к Sounds предполагает, что это не имеет ничего общего с моими звуковыми драйверами. Для DirectX перейдите в меню «Пуск | Запустите и получим следующую ошибку:
Ошибка DirectSound v2.2.11
Драйвер Bad DirectSound. вернуть звук, перезагрузив компьютер. Единственное различие — подключение к Интернету, которое я выбираю в конфигурации другого устройства.
Какая версия Windows вы, когда я дома (это никогда не случалось при резиденции в университете). Когда я пытаюсь воспроизвести песню в winamp с моим звуком. Итак, есть ли какой-либо единственный способ, которым я могу составлять компонент DirectX.
Теперь меня смущает то, что мой ноутбук только когда-либо делал это иначе, чем я был бы в резиденции.
I’m having a If so, DirectSound is type DXDIAG
На первой вкладке будет версия. Пожалуйста, установите правильные драйверы или запустить, а также версию DirectX?
Код ошибки: в разделе «Примечания» внизу?
don’t know how many times but still without result. faced my same problem but not managing to solve it. IAVS4 Control Service (aswUpdSv) — Unknown owner — C:Program FilesAlwil SoftwareAvast4aswUpdSv.exe
O23 — Сервис: — — C: Program Files MacGaming SweetIMBarForIE toolbar.dll
R3 — URLSearchHook: Yahoo! I get that the file doesn’t exist.
Если кто-то знает, как или думает, что у меня / я, похоже, установлены последние драйверы, но после того, как я сам решил решить другую проблему самостоятельно
R3 — URLSearchHook: SweetIM Для Internet Explorer — следующий.
Источник
Adblock
detector
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and
privacy statement. We’ll occasionally send you account related emails.
Already on GitHub?
Sign in
to your account
Comments
Hi,
I seem to get this error regardless of what backend I try to use. Showing output configured for WDMKS.
FlexASIO-issue-100.txt
Thanks,
I believe you are referring to this line:
2020-11-19T12:33:11.7494689-05:00 6016 9996 asioVersion = 2 driverVersion = 2 name = FlexASIO errorMessage = No ASIO Driver Error sysRef = 0000000000000000
This message is perfectly normal and there is no cause for concern. The message should be read as «No Error», i.e. everything is fine. Well, everything is fine as far as early initialization is concerned; it’s later that things go wrong.
Your log does show a problem where the WDM-KS backend is unable to open your audio device at any sample rate:
2020-11-19T12:33:11.7496132-05:00 6016 9996 ASIOCanSampleRate(44100)
2020-11-19T12:33:11.7533464-05:00 6016 9996 -> -995 [ASE_NoClock]
2020-11-19T12:33:11.7533649-05:00 6016 9996 ASIOCanSampleRate(48000)
2020-11-19T12:33:11.7562924-05:00 6016 9996 -> -995 [ASE_NoClock]
2020-11-19T12:33:11.7563110-05:00 6016 9996 ASIOCanSampleRate(96000)
2020-11-19T12:33:11.7592072-05:00 6016 9996 -> -995 [ASE_NoClock]
2020-11-19T12:33:11.7592251-05:00 6016 9996 ASIOCanSampleRate(192000)
2020-11-19T12:33:11.7623354-05:00 6016 9996 -> -995 [ASE_NoClock]
2020-11-19T12:38:19.4791190-05:00 3964 15024 Checking for sample rate: 44100
2020-11-19T12:38:19.4791395-05:00 3964 15024 Checking if input supports this sample rate
2020-11-19T12:38:19.4791583-05:00 3964 15024 CFlexASIO::OpenStream(inputEnabled = 1, outputEnabled = 0, sampleRate = 44100, framesPerBuffer = 0, callback = 00007FF9943AE110, callbackUserData = 0000000000000000
2020-11-19T12:38:19.4791830-05:00 3964 15024 Opening PortAudio stream with...
2020-11-19T12:38:19.4792020-05:00 3964 15024 ...input parameters: PortAudio stream parameters for device index 48, 10 channels, sample format 2147483649 [Float32, NonInterleaved], suggested latency 0s
2020-11-19T12:38:19.4792274-05:00 3964 15024 ...output parameters: none
2020-11-19T12:38:19.4792463-05:00 3964 15024 ...sample rate: 44100 Hz
2020-11-19T12:38:19.4792662-05:00 3964 15024 ...frames per buffer: 0
2020-11-19T12:38:19.4792849-05:00 3964 15024 ...stream flags: 8 [PrimeOutputBuffersUsingStreamCallback]
2020-11-19T12:38:19.4793048-05:00 3964 15024 ...stream callback: 00007FF9943AE110 (user data 0000000000000000)
2020-11-19T12:38:19.4793282-05:00 3964 15024 [PortAudio] OpenStream:sampleRate = 44100.000000
2020-11-19T12:38:19.4793492-05:00 3964 15024 [PortAudio] OpenStream:framesPerBuffer = 0
2020-11-19T12:38:19.4794173-05:00 3964 15024 [PortAudio] Pin create result = 0x00000491
…previous line repeated many times…
2020-11-19T12:38:19.4832335-05:00 3964 15024 Input does not support this sample rate: unable to open PortAudio stream: Invalid device
2020-11-19T12:38:19.4832668-05:00 3964 15024 Checking if output supports this sample rate
2020-11-19T12:38:19.4832878-05:00 3964 15024 CFlexASIO::OpenStream(inputEnabled = 0, outputEnabled = 1, sampleRate = 44100, framesPerBuffer = 0, callback = 00007FF9943AE110, callbackUserData = 0000000000000000
2020-11-19T12:38:19.4833207-05:00 3964 15024 Opening PortAudio stream with...
2020-11-19T12:38:19.4833427-05:00 3964 15024 ...input parameters: none
2020-11-19T12:38:19.4833625-05:00 3964 15024 ...output parameters: PortAudio stream parameters for device index 47, 8 channels, sample format 2147483649 [Float32, NonInterleaved], suggested latency 0s
2020-11-19T12:38:19.4833901-05:00 3964 15024 ...sample rate: 44100 Hz
2020-11-19T12:38:19.4834124-05:00 3964 15024 ...frames per buffer: 0
2020-11-19T12:38:19.4834329-05:00 3964 15024 ...stream flags: 8 [PrimeOutputBuffersUsingStreamCallback]
2020-11-19T12:38:19.4834562-05:00 3964 15024 ...stream callback: 00007FF9943AE110 (user data 0000000000000000)
2020-11-19T12:38:19.4834874-05:00 3964 15024 [PortAudio] OpenStream:sampleRate = 44100.000000
2020-11-19T12:38:19.4835118-05:00 3964 15024 [PortAudio] OpenStream:framesPerBuffer = 0
2020-11-19T12:38:19.4835884-05:00 3964 15024 [PortAudio] Pin create result = 0x00000491
…previous line repeated many times…
2020-11-19T12:38:19.4851081-05:00 3964 15024 Output does not support this sample rate: unable to open PortAudio stream: Invalid device
2020-11-19T12:38:19.4851532-05:00 3964 15024 Sample rate 44100 is unavailable
It’s not clear to me what could cause this, and WDM-KS internals are notoriously difficult to understand. (Do keep in mind that, as explained in the FAQ, WDM-KS is unlikely to work if «SERIES 102i/208i Audio» is already being used by another application, or if it’s selected as default audio device in the Windows settings.)
Are you saying that you can’t get FlexASIO to work with your audio device with any backend? If so, please provide a log with the following configuration and no other options:
[input] device = "Microphone (SERIES 208i)" [output] device = "Speakers (SERIES 208i)"
Thanks for the reply. That message is a good example of the interesting intersection of audio vs software engineering. I thought that message was fatal — indicating it could not attach to the 208..
I have configured as specified and run flexasiotest, amplitube4, reaper DAW, and attached the log. Amplitube says it cannot initialize the device, Reaper says it cannot initialize buffers. prior to running these, i reconfigured windows default and verified with portaudiodevices that 208 is no longer a default device in windows.
flexASIO.log
dechamps
changed the title
FlexASIO errorMessage = No ASIO Driver Error
Unable to open Tascam SERIES 208i output device (10 channels)
Nov 21, 2020
The thing that jumps at me in your logs is the huge number of channels exposed by the device you’re using (20 input channels and 10 output channels). I didn’t even know a single Windows audio endpoint could expose this many channels! I am not aware of anyone having tested FlexASIO with that kind of device before, you might very well be the first. One possibility is that you might be hitting undiscovered bugs and novel edge cases for that reason.
Anyway… digging into your last log, the DirectSound backend seems to behave better than WDM-KS, because DirectSound manages to at least open your input device (WDM-KS could open neither). DirectSound is unable to open the output device though:
2020-11-20T12:20:30.6601463-05:00 8776 17580 CFlexASIO::OpenStream(inputEnabled = 0, outputEnabled = 1, sampleRate = 44100, framesPerBuffer = 0, callback = 00007FF9960DE110, callbackUserData = 0000000000000000
2020-11-20T12:20:30.6601833-05:00 8776 17580 Opening PortAudio stream with...
2020-11-20T12:20:30.6602086-05:00 8776 17580 ...input parameters: none
2020-11-20T12:20:30.6602291-05:00 8776 17580 ...output parameters: PortAudio stream parameters for device index 28, 10 channels, sample format 2147483649 [Float32, NonInterleaved], suggested latency 0s
2020-11-20T12:20:30.6602590-05:00 8776 17580 ...sample rate: 44100 Hz
2020-11-20T12:20:30.6602808-05:00 8776 17580 ...frames per buffer: 0
2020-11-20T12:20:30.6603012-05:00 8776 17580 ...stream flags: 8 [PrimeOutputBuffersUsingStreamCallback]
2020-11-20T12:20:30.6603226-05:00 8776 17580 ...stream callback: 00007FF9960DE110 (user data 0000000000000000)
2020-11-20T12:20:30.6603876-05:00 8776 17580 [PortAudio] DirectSound host buffer size frames: 132, polling period seconds: 0.000998, @ sr: 44100.000000
2020-11-20T12:20:30.6703778-05:00 8776 17580 [PortAudio] InitOutputBuffer() returns 88780064
2020-11-20T12:20:30.6707802-05:00 8776 17580 Output does not support this sample rate: unable to open PortAudio stream: Unanticipated host error
88780064 is DSERR_BADFORMAT «The specified wave format is not supported». This error is returned regardless of sample rate.
One possibility is that DirectSound itself doesn’t support this many channels, but that seems unlikely because it manages to open the 20-channel input device just fine.
It would be interesting to try WASAPI, at least to see what kind of error you get. Could you please produce a log while running FlexASIOTest with the following:
backend = "Windows WASAPI" [input] device = "Microphone (SERIES 208i)" [output] device = "Speakers (SERIES 208i)"
And while we’re at it, let’s try exclusive mode as well in case the issue lies somewhere within the Windows audio engine:
backend = "Windows WASAPI" [input] device = "Microphone (SERIES 208i)" wasapiExclusiveMode = true [output] device = "Speakers (SERIES 208i)" wasapiExclusiveMode = true
not sure, with windows the way it is…pretty hard to tell. What I would say is that, this number of inputs is fairly normal for a current mid-grade interface. Its just not a typical 2×2. Its just for larger live input needs, and has capabilities to mix 8 channel surround..
flexASIO-WASAPINONEX.log
flexASIO-WASAPIEX.log
@iamthechrisb You didn’t enable WASAPI in the two log files you provided. Your configuration file is missing the backend = "Windows WASAPI" line.
looks that way — think I have it this time.
flexASIO-WASAPIEX.log
flexASIO-WASAPINONEX.log
I was able to pass audio. I was also able to open driver in multiple programs in non exclusive mode. Curious if you have a ballpark idea of the latency difference between wasapi and wdm.
Yep, looks like it’s working with WASAPI, so feel free to use that instead.
However, I noticed in your logs that WASAPI seems to be missing 2 output channels — WASAPI advertises the output device as having 8 channels, not 10. You might want to double check that. Sometimes it’s possible to fix this problem by changing the number of channels that is configured in the Windows audio device settings («Advanced» tab).
I will keep this issue open because it’s abnormal that other backends are struggling with this. When I have some time I will try to reproduce it using a virtual audio device or something, and investigate whether it’s a PortAudio bug (likely for WDM-KS, less likely for DS) and if it can be fixed. Might also want to check MME as well for completeness.
Curious if you have a ballpark idea of the latency difference between wasapi and wdm.
WASAPI Exclusive should have similar latency to WDM-KS, maybe slightly better or worse, depending on many factors that are difficult to predict.
WASAPI Shared will always have significantly higher latency (about 20 ms more if I remember correctly) than the above two because it has to go through the Windows audio engine which has its own buffers.
Thanks dechamps, I appreciate you looking over this.
On the 10 outputs, I can only think its something about usb audio paths from the host to the interface. While the interface has 8 analog audio outputs — it also has ‘channels’ that appear from the host.. Perhaps that explains something, at least something that correlates to 10… My guess is that has something to do with working with 7.1, and having a monitoring path.. You can get a better idea from the pic I attached. IN the bottom right you will see where these 10 lines can be routed to ther 8 physical analog out — but there is only 8 to route them to…
Chris,
Thanks for the details. The thing that I find puzzling is the number of output channels reported by the various backends:
- MME: 10
- DirectSound: 10
- WASAPI: 8
- WDM-KS: 10
The WASAPI channel count is very surprising because it’s different from all the others and, more importantly, it’s smaller than the channel counts from MME and DS. That makes no sense to me because MME and DS use WASAPI internally, so I don’t see how they can report channels that WASAPI doesn’t make available. This might have something to do with the PortAudio WASAPI code, I’ll investigate further when I find some time.
(Maybe that could explain why MME and DS don’t work: they want to use 10 channels but WASAPI only lets them access 8…)
I am able to reproduce using Virtual Audio Cable 4.64, using a 10-channel virtual cable operating in WavePci mode, and Windows audio settings set to 8 channels (not 10). I then end up with MME and DS reporting 10 channels, WASAPI only reporting 8, and WDM-KS reporting 10, just as reported. Likewise, attempting to use DS results in the same 88780064 error, but WASAPI works fine.
Surprisingly, MME seems to work (as far as initialization is concerned, at least). WDM-KS too. So this really looks like a DirectSound-specific issue.
Fixing the channel count in the Windows audio device settings (i.e. setting it to 10, not 
Conclusion: the problem is that DirectSound fails with 88780064 (DSERR_BADFORMAT) when attempting to open a 10-channel output device that is not properly set to 10-channel in the Windows device settings. One solution is to, well, to configure the device correctly in Windows in the first place.
dechamps
changed the title
Unable to open Tascam SERIES 208i output device (10 channels)
Error 88780064 when attempting to open 10-channel output device with DirectSound
Dec 31, 2020
Further investigation reveals that the 88780064 error (DSERR_BADFORMAT) is being returned from the IDirectSound_CreateSoundBuffer() call for the secondary buffer in InitOutputBuffer() in pa_win_ds.c.
There doesn’t seem to be anything wrong with the call itself, so I’m going to treat this as an inherent DirectSound quirk/limitation and will update the docs accordingly. This problem can be avoided by configuring the Windows audio device settings correctly.
2 participants
| Author | Message |
|---|---|
|
Post subject: Problem with Winamp PostPosted: Tue Nov 17, 2009 6:16 pm |
|
|
|
Hello.After installing sound card ESI MAYA 44 and its drivers, Winamp stopped working.I get an error mesage saying: |
| Top |
Profile Reply with quote |
|
Joun |
Post subject: Re: Problem with Winamp PostPosted: Tue Nov 17, 2009 8:42 pm |
|
|
OK now, I’ve found it.I didn’t set up correctly the default device. |
| Top | |
iamthechrisb opened this issue 2 years ago · comments
Hi,
I seem to get this error regardless of what backend I try to use. Showing output configured for WDMKS.
FlexASIO-issue-100.txt
Thanks,
I believe you are referring to this line:
2020-11-19T12:33:11.7494689-05:00 6016 9996 asioVersion = 2 driverVersion = 2 name = FlexASIO errorMessage = No ASIO Driver Error sysRef = 0000000000000000
This message is perfectly normal and there is no cause for concern. The message should be read as «No Error», i.e. everything is fine. Well, everything is fine as far as early initialization is concerned; it’s later that things go wrong.
Your log does show a problem where the WDM-KS backend is unable to open your audio device at any sample rate:
2020-11-19T12:33:11.7496132-05:00 6016 9996 ASIOCanSampleRate(44100)
2020-11-19T12:33:11.7533464-05:00 6016 9996 -> -995 [ASE_NoClock]
2020-11-19T12:33:11.7533649-05:00 6016 9996 ASIOCanSampleRate(48000)
2020-11-19T12:33:11.7562924-05:00 6016 9996 -> -995 [ASE_NoClock]
2020-11-19T12:33:11.7563110-05:00 6016 9996 ASIOCanSampleRate(96000)
2020-11-19T12:33:11.7592072-05:00 6016 9996 -> -995 [ASE_NoClock]
2020-11-19T12:33:11.7592251-05:00 6016 9996 ASIOCanSampleRate(192000)
2020-11-19T12:33:11.7623354-05:00 6016 9996 -> -995 [ASE_NoClock]
2020-11-19T12:38:19.4791190-05:00 3964 15024 Checking for sample rate: 44100
2020-11-19T12:38:19.4791395-05:00 3964 15024 Checking if input supports this sample rate
2020-11-19T12:38:19.4791583-05:00 3964 15024 CFlexASIO::OpenStream(inputEnabled = 1, outputEnabled = 0, sampleRate = 44100, framesPerBuffer = 0, callback = 00007FF9943AE110, callbackUserData = 0000000000000000
2020-11-19T12:38:19.4791830-05:00 3964 15024 Opening PortAudio stream with...
2020-11-19T12:38:19.4792020-05:00 3964 15024 ...input parameters: PortAudio stream parameters for device index 48, 10 channels, sample format 2147483649 [Float32, NonInterleaved], suggested latency 0s
2020-11-19T12:38:19.4792274-05:00 3964 15024 ...output parameters: none
2020-11-19T12:38:19.4792463-05:00 3964 15024 ...sample rate: 44100 Hz
2020-11-19T12:38:19.4792662-05:00 3964 15024 ...frames per buffer: 0
2020-11-19T12:38:19.4792849-05:00 3964 15024 ...stream flags: 8 [PrimeOutputBuffersUsingStreamCallback]
2020-11-19T12:38:19.4793048-05:00 3964 15024 ...stream callback: 00007FF9943AE110 (user data 0000000000000000)
2020-11-19T12:38:19.4793282-05:00 3964 15024 [PortAudio] OpenStream:sampleRate = 44100.000000
2020-11-19T12:38:19.4793492-05:00 3964 15024 [PortAudio] OpenStream:framesPerBuffer = 0
2020-11-19T12:38:19.4794173-05:00 3964 15024 [PortAudio] Pin create result = 0x00000491
…previous line repeated many times…
2020-11-19T12:38:19.4832335-05:00 3964 15024 Input does not support this sample rate: unable to open PortAudio stream: Invalid device
2020-11-19T12:38:19.4832668-05:00 3964 15024 Checking if output supports this sample rate
2020-11-19T12:38:19.4832878-05:00 3964 15024 CFlexASIO::OpenStream(inputEnabled = 0, outputEnabled = 1, sampleRate = 44100, framesPerBuffer = 0, callback = 00007FF9943AE110, callbackUserData = 0000000000000000
2020-11-19T12:38:19.4833207-05:00 3964 15024 Opening PortAudio stream with...
2020-11-19T12:38:19.4833427-05:00 3964 15024 ...input parameters: none
2020-11-19T12:38:19.4833625-05:00 3964 15024 ...output parameters: PortAudio stream parameters for device index 47, 8 channels, sample format 2147483649 [Float32, NonInterleaved], suggested latency 0s
2020-11-19T12:38:19.4833901-05:00 3964 15024 ...sample rate: 44100 Hz
2020-11-19T12:38:19.4834124-05:00 3964 15024 ...frames per buffer: 0
2020-11-19T12:38:19.4834329-05:00 3964 15024 ...stream flags: 8 [PrimeOutputBuffersUsingStreamCallback]
2020-11-19T12:38:19.4834562-05:00 3964 15024 ...stream callback: 00007FF9943AE110 (user data 0000000000000000)
2020-11-19T12:38:19.4834874-05:00 3964 15024 [PortAudio] OpenStream:sampleRate = 44100.000000
2020-11-19T12:38:19.4835118-05:00 3964 15024 [PortAudio] OpenStream:framesPerBuffer = 0
2020-11-19T12:38:19.4835884-05:00 3964 15024 [PortAudio] Pin create result = 0x00000491
…previous line repeated many times…
2020-11-19T12:38:19.4851081-05:00 3964 15024 Output does not support this sample rate: unable to open PortAudio stream: Invalid device
2020-11-19T12:38:19.4851532-05:00 3964 15024 Sample rate 44100 is unavailable
It’s not clear to me what could cause this, and WDM-KS internals are notoriously difficult to understand. (Do keep in mind that, as explained in the FAQ, WDM-KS is unlikely to work if «SERIES 102i/208i Audio» is already being used by another application, or if it’s selected as default audio device in the Windows settings.)
Are you saying that you can’t get FlexASIO to work with your audio device with any backend? If so, please provide a log with the following configuration and no other options:
[input] device = "Microphone (SERIES 208i)" [output] device = "Speakers (SERIES 208i)"
Thanks for the reply. That message is a good example of the interesting intersection of audio vs software engineering. I thought that message was fatal — indicating it could not attach to the 208..
I have configured as specified and run flexasiotest, amplitube4, reaper DAW, and attached the log. Amplitube says it cannot initialize the device, Reaper says it cannot initialize buffers. prior to running these, i reconfigured windows default and verified with portaudiodevices that 208 is no longer a default device in windows.
flexASIO.log
The thing that jumps at me in your logs is the huge number of channels exposed by the device you’re using (20 input channels and 10 output channels). I didn’t even know a single Windows audio endpoint could expose this many channels! I am not aware of anyone having tested FlexASIO with that kind of device before, you might very well be the first. One possibility is that you might be hitting undiscovered bugs and novel edge cases for that reason.
Anyway… digging into your last log, the DirectSound backend seems to behave better than WDM-KS, because DirectSound manages to at least open your input device (WDM-KS could open neither). DirectSound is unable to open the output device though:
2020-11-20T12:20:30.6601463-05:00 8776 17580 CFlexASIO::OpenStream(inputEnabled = 0, outputEnabled = 1, sampleRate = 44100, framesPerBuffer = 0, callback = 00007FF9960DE110, callbackUserData = 0000000000000000
2020-11-20T12:20:30.6601833-05:00 8776 17580 Opening PortAudio stream with...
2020-11-20T12:20:30.6602086-05:00 8776 17580 ...input parameters: none
2020-11-20T12:20:30.6602291-05:00 8776 17580 ...output parameters: PortAudio stream parameters for device index 28, 10 channels, sample format 2147483649 [Float32, NonInterleaved], suggested latency 0s
2020-11-20T12:20:30.6602590-05:00 8776 17580 ...sample rate: 44100 Hz
2020-11-20T12:20:30.6602808-05:00 8776 17580 ...frames per buffer: 0
2020-11-20T12:20:30.6603012-05:00 8776 17580 ...stream flags: 8 [PrimeOutputBuffersUsingStreamCallback]
2020-11-20T12:20:30.6603226-05:00 8776 17580 ...stream callback: 00007FF9960DE110 (user data 0000000000000000)
2020-11-20T12:20:30.6603876-05:00 8776 17580 [PortAudio] DirectSound host buffer size frames: 132, polling period seconds: 0.000998, @ sr: 44100.000000
2020-11-20T12:20:30.6703778-05:00 8776 17580 [PortAudio] InitOutputBuffer() returns 88780064
2020-11-20T12:20:30.6707802-05:00 8776 17580 Output does not support this sample rate: unable to open PortAudio stream: Unanticipated host error
88780064 is DSERR_BADFORMAT «The specified wave format is not supported». This error is returned regardless of sample rate.
One possibility is that DirectSound itself doesn’t support this many channels, but that seems unlikely because it manages to open the 20-channel input device just fine.
It would be interesting to try WASAPI, at least to see what kind of error you get. Could you please produce a log while running FlexASIOTest with the following:
backend = "Windows WASAPI" [input] device = "Microphone (SERIES 208i)" [output] device = "Speakers (SERIES 208i)"
And while we’re at it, let’s try exclusive mode as well in case the issue lies somewhere within the Windows audio engine:
backend = "Windows WASAPI" [input] device = "Microphone (SERIES 208i)" wasapiExclusiveMode = true [output] device = "Speakers (SERIES 208i)" wasapiExclusiveMode = true
not sure, with windows the way it is…pretty hard to tell. What I would say is that, this number of inputs is fairly normal for a current mid-grade interface. Its just not a typical 2×2. Its just for larger live input needs, and has capabilities to mix 8 channel surround..
flexASIO-WASAPINONEX.log
flexASIO-WASAPIEX.log
@iamthechrisb You didn’t enable WASAPI in the two log files you provided. Your configuration file is missing the backend = "Windows WASAPI" line.
looks that way — think I have it this time.
flexASIO-WASAPIEX.log
flexASIO-WASAPINONEX.log
I was able to pass audio. I was also able to open driver in multiple programs in non exclusive mode. Curious if you have a ballpark idea of the latency difference between wasapi and wdm.
Yep, looks like it’s working with WASAPI, so feel free to use that instead.
However, I noticed in your logs that WASAPI seems to be missing 2 output channels — WASAPI advertises the output device as having 8 channels, not 10. You might want to double check that. Sometimes it’s possible to fix this problem by changing the number of channels that is configured in the Windows audio device settings («Advanced» tab).
I will keep this issue open because it’s abnormal that other backends are struggling with this. When I have some time I will try to reproduce it using a virtual audio device or something, and investigate whether it’s a PortAudio bug (likely for WDM-KS, less likely for DS) and if it can be fixed. Might also want to check MME as well for completeness.
Curious if you have a ballpark idea of the latency difference between wasapi and wdm.
WASAPI Exclusive should have similar latency to WDM-KS, maybe slightly better or worse, depending on many factors that are difficult to predict.
WASAPI Shared will always have significantly higher latency (about 20 ms more if I remember correctly) than the above two because it has to go through the Windows audio engine which has its own buffers.
Thanks dechamps, I appreciate you looking over this.
On the 10 outputs, I can only think its something about usb audio paths from the host to the interface. While the interface has 8 analog audio outputs — it also has ‘channels’ that appear from the host.. Perhaps that explains something, at least something that correlates to 10… My guess is that has something to do with working with 7.1, and having a monitoring path.. You can get a better idea from the pic I attached. IN the bottom right you will see where these 10 lines can be routed to ther 8 physical analog out — but there is only 8 to route them to…
Chris,
Thanks for the details. The thing that I find puzzling is the number of output channels reported by the various backends:
- MME: 10
- DirectSound: 10
- WASAPI: 8
- WDM-KS: 10
The WASAPI channel count is very surprising because it’s different from all the others and, more importantly, it’s smaller than the channel counts from MME and DS. That makes no sense to me because MME and DS use WASAPI internally, so I don’t see how they can report channels that WASAPI doesn’t make available. This might have something to do with the PortAudio WASAPI code, I’ll investigate further when I find some time.
(Maybe that could explain why MME and DS don’t work: they want to use 10 channels but WASAPI only lets them access 8…)
I am able to reproduce using Virtual Audio Cable 4.64, using a 10-channel virtual cable operating in WavePci mode, and Windows audio settings set to 8 channels (not 10). I then end up with MME and DS reporting 10 channels, WASAPI only reporting 8, and WDM-KS reporting 10, just as reported. Likewise, attempting to use DS results in the same 88780064 error, but WASAPI works fine.
Surprisingly, MME seems to work (as far as initialization is concerned, at least). WDM-KS too. So this really looks like a DirectSound-specific issue.
Fixing the channel count in the Windows audio device settings (i.e. setting it to 10, not 
Conclusion: the problem is that DirectSound fails with 88780064 (DSERR_BADFORMAT) when attempting to open a 10-channel output device that is not properly set to 10-channel in the Windows device settings. One solution is to, well, to configure the device correctly in Windows in the first place.
Further investigation reveals that the 88780064 error (DSERR_BADFORMAT) is being returned from the IDirectSound_CreateSoundBuffer() call for the secondary buffer in InitOutputBuffer() in pa_win_ds.c.
There doesn’t seem to be anything wrong with the call itself, so I’m going to treat this as an inherent DirectSound quirk/limitation and will update the docs accordingly. This problem can be avoided by configuring the Windows audio device settings correctly.
| Автор | Сообщение | |||
|---|---|---|---|---|
|
||||
|
Advanced guest Статус: Не в сети |
Категорически запрещено обсуждение взлома любых технологий третьих сторон (Dolby/DTS), требующих лицензирования оборудования, т.е. энкодеров и декодеров. Все такие сообщения будут удаляться без предупреждения, при повторении выдаваться ЖК. FAQ находится на первой странице. Перед тем, как задать вопрос, настоятельно рекомендуется поискать ответ там. Это гораздо проще и быстрее, чем ждать ответа на вопрос, на который всем давно надоело отвечать. Сообщения, ответы на которые находятся в FAQ или шапке темы, могут быть удалены в любой момент без предупреждения. В случае попыток продублировать удаленное могут выдаваться ЖК. 3D-звук и EAX в Windows Vista/7/8/8.1/10 https://overclockers.ru/blog/4ealex/sho … stvo_i_FAQ ) Описание всех настроек карты https://overclockers.ru/blog/4ealex/sho … _Game_Mode ) Как настроить 3D-звук раз и навсегда Важное предупреждение: если после чистки реестра и драйверов различными программами драйвер или ПО Creative больше не видят карту, или если используется любая версия Windows кроме полностью официальной, то избавьте нас от своих проблем. Последний раз редактировалось 4e_alex 13.02.2011 23:58, всего редактировалось 11 раз(а). |
| Реклама | |
|
Партнер |
|
pretorian |
|
|
Member Статус: Не в сети |
Теперь у меня Вин 7 с сп1, но audiodg.exe всё равно кучу оперативки жрет! Сейчас вот 1.5 Гб. |
|
Злая @ ™ |
|
|
Member Статус: Не в сети |
25 окт. 2011 обновились версии модифицированного софта от daniel_k : Sound Blaster X-Fi Support Pack v2.5 by daniel_k http://forums.creative.com/t5/Sound-Bla … d-p/587995 Цитата: — Creative SB X-Fi PCI (OEM/Retail Elite Pro, Fatal1ty, Platinum, Platinum Fatal1ty Champion, XtremeGamer, XtremeGamer Fatal1ty Pro, XtremeMusic) Operating Systems supported (32-bit and 64-bit editions): Items that will be installed, depending on the detected card: — Creative SB X-Fi series driver 2.18.0015.11 Beta Windows Security warning during driver installation MediaSource DVD-Audio Player available for selected models See the complete list at: http://www.creative.com/soundblaster/X-FiList/ List of Improvements and fixes — Adds ASIO and OpenAL support for 64-bit applications. — THX Console works with Auzentech X-Fi Prelude, Auzentech X-Fi Forte, Auzentech HomeTheater HD and other cards. — All setup scripts were modified to detect Windows 7. — Updated many applications and shared components.
|
|
@lex_$k8*Er |
|
|
Member Статус: Не в сети |
поставил вчера этот пак на чистую ОС.. звук на 24192 шёл с искажениями. переустановил только драйвер |
|
Divino |
|
|
Member Статус: Не в сети |
Злая @ ™ писал(а): Надеюсь не боян ? баяяян! |
|
4e_alex |
|
|
Advanced guest Статус: Не в сети |
За ссылки на PAX и байки про положительные отличия от официального драйвера впредь буду выдавать ЖК. |
|
Divino |
|
|
Member Статус: Не в сети |
4e_alex писал(а): За ссылки на PAX и байки про положительные отличия от официального драйвера впредь буду выдавать ЖК. Байки про супер звучание -лишние, согласен. Но чем ссылки-то помешали? Кому надо пусть пользуются, к «Creative Sound Blaster X-Fi» это имеет прямое отношение. Разве нет? |
|
Olegovich |
|
|
Member Статус: Не в сети |
ПОЖАР(( .. Парни после попыток разгона заметил что звука нет. Интегрированная карта в биосе отключена, стоит Titanium HD. На попытку открыть панель управления пишет «the audio device supported by this application is not detected» или «there are no supported audio device available. you need to cloze the application. click ok to close application now». |
|
Church |
|
|
Member Статус: Не в сети |
Olegovich: редко встречал, что отдельные контроллеры окончательно повредились при разгоне, но вот что начали глючить или неработать — да (на разогнанном конфиге конечно). Попробуй откатится на дефолтные установки в биосе, или как минимум понизить частоты связанные с шиной используемой звуковухой. |
|
Olegovich |
|
|
Member Статус: Не в сети |
Church писал(а): Olegovich: редко встречал, что отдельные контроллеры окончательно повредились при разгоне, но вот что начали глючить или неработать — да (на разогнанном конфиге конечно). Попробуй откатится на дефолтные установки в биосе, или как минимум понизить частоты связанные с шиной используемой звуковухой. сейчас стоит на дефолте, в процессах есть , в диспетчере устройств пишет нормально работает.. |
|
kolyan1980-08-11 |
|
|
Member Статус: Не в сети |
Тоже такое было, только на AMD платформе, когда в дефолт сбросил это непомогло, посоветовали переустановить систему, и помогло. |
|
Olegovich |
|
|
Member Статус: Не в сети |
с картой ничего не случилось? |
|
Nutty_G |
|
|
Member Статус: Не в сети |
После сборки и разгона новой системы звуковушка (X-Fi Fatality Pro) перестала показывать устройство «динамики» в свойствах звука винды. Есть только SPDIF. Дрова встают нормально, устройство в систему добавляется, родные проги при этом не видят карту. Возвращался к дефолту, сбрасывал БИОС, игрался частотой PCI-E и поднятием напряжения на ней — никакого эффекта… переставил вторую X-Fi с профильного компа в новый и наоборот: наблюдается одинаковая картина — моя X-Fi работает в обоих компах, Fatality везде висит в системе как SPDIF устройство и всё, никакого звука… Пора на помойку? Кто-то может диагностику сделать? Карта уже не на гарантии (. p.s. при первом запуске новой системы был характерный палёный запах… даже и думать про худшее не хочу |
|
Olegovich |
|
|
Member Статус: Не в сети |
Сбросил биос в дефолт -> не помогло. |
|
Shark201 |
|
|
Member Статус: Не в сети |
Olegovich писал(а): Сбросил биос в дефолт -> не помогло. Вытащи карту, обнули биос, загрузи винду. Потом выключи комп, вставь карту в другой слот, загрузи винду и установи драйверы. В настройках звука посмотри, стоит ли звуковая карты основным устройством по дефолту. Так как сейчас все видеокарты идут со своим звуком и звук может идти через них. Добавлено спустя 4 минуты 54 секунды: Ilya_S писал(а): Цитата: Хотя звук вроде и не плохой, расположение источников звука, как в моно режиме в моно нет никакого расположения источников Все вроде наладилось, звук в батле 3 середнячок. Хотя звук на истребители при повороте радует |
|
Longhorn Lesnaya |
|
|
|
Приветствую всех, проблема с карточкой а именно переустановил винду поставил Windows 7 64x на новую свежеустановленную винду поставил дрова от Daniel_K вроде все было нормально все работало, но после того как залез в Creative control panel и полазил по настройкам звука, перестал работать контрольная панель, консоль, гугается на то что не видет устройства, The audio device supported by this application is not detected/ The application will exit. карточка Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series, помогите пожалуста с долбанным софтом. |
|
Olegovich |
|
|
Member Статус: Не в сети |
Longhorn Lesnaya писал(а): Приветствую всех, проблема с карточкой а именно переустановил винду поставил Windows 7 64x на новую свежеустановленную винду поставил дрова от Daniel_K вроде все было нормально все работало, но после того как залез в Creative control panel и полазил по настройкам звука, перестал работать контрольная панель, консоль, гугается на то что не видет устройства, The audio device supported by this application is not detected/ The application will exit. карточка Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series, помогите пожалуста с долбанным софтом. у меня было такое же сообщение когда я пытался открыть консоль или контрольную панель после неудачного разгона. биос сбросил и переустановил только дрова аудио карты, помогло) |
|
VAGUR |
|
|
Member Статус: Не в сети |
В Winamp`е периодически вываливается «Ошибка «Вывод DirectSound v2.6(d)» Ошибка при создании буфера DirectSound. Код ошибки: 88780064» такое происходит только в Game Mode при использовании алчеми и только на некоторых композициях… может алчеми где-то подкрутить? |
|
Longhorn Lesnaya |
|
|
|
Olegovich |
|
Mr.Spoke |
|
|
Member Статус: Не в сети |
Взял себе Creative X-Fi Xtreme Music (SB0460) Доволен как слон Cd, Flac and vinils просто супер играет Музыка на высшем уровне В играх шикарно В том же кс слышимость просто феноминальная |
|
Shark201 |
|
|
Member Статус: Не в сети |
VAGUR писал(а): В Winamp`е периодически вываливается «Ошибка «Вывод DirectSound v2.6(d)» Ошибка при создании буфера DirectSound. Код ошибки: 88780064» такое происходит только в Game Mode при использовании алчеми и только на некоторых композициях… может алчеми где-то подкрутить? Алхимию для винампа? Нафига это бред? Настрой вывод звука через АСИО если хочешь так обойти виндовские микшеры. Или разбежаться и Добавлено спустя 2 минуты 55 секунд: Longhorn Lesnaya писал(а): Приветствую всех, проблема с карточкой а именно переустановил винду поставил Windows 7 64x на новую свежеустановленную винду поставил дрова от Daniel_K вроде все было нормально все работало, но после того как залез в Creative control panel и полазил по настройкам звука, перестал работать контрольная панель, консоль, гугается на то что не видет устройства, The audio device supported by this application is not detected/ The application will exit. карточка Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series, помогите пожалуста с долбанным софтом. Вынь карту удали все драйвера, воткни в другой слот и установи. Разгон есть? Если есть зафиксируй частоту работы шины в биосе, на которой сидит карта, может из-за неё карта отваливается. |
—
Кто сейчас на конференции |
|
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 15 |
| Вы не можете начинать темы Вы не можете отвечать на сообщения Вы не можете редактировать свои сообщения Вы не можете удалять свои сообщения Вы не можете добавлять вложения |
Лаборатория
Новости
Sometimes Winamp shows me the following error message:
After that there is no audio output (just the error message) at all until I reboot the system. Is it possible to have audio again without rebooting? How could I completely avoid this kind of errors?
Environment: Windows 7, x64 on a Lenovo T420. It usually happens when I connect or disconnect and USB headset (Plantronics .Audio 655).
- windows-7
- windows
- audio
- winamp
asked Mar 28, 2013 at 12:31
palacsintpalacsint
6282 gold badges7 silver badges24 bronze badges
2
-
which version of DirectX are you using? Have you ran DirectX End User Runtime? tinyurl.com/7j3zvcc
Mar 28, 2013 at 17:38
-
@Znau: DirectX 11. No, I haven’t. Should I? (It seems that it is for older DirectXs.)
Apr 3, 2013 at 12:53
4 Answers
mirh
8811 gold badge10 silver badges20 bronze badges
answered Apr 10, 2013 at 12:52
palacsintpalacsint
6282 gold badges7 silver badges24 bronze badges
This worked for me:
- Open Winamp preferences (Ctrl+P)
- Go to plug-ins -> output
- Highlight DirectSound Output -> Configure
- Change device to what you have (in my case
ddj-400) - Same with WaveOut Output
- Restart Winamp
zx485
2,17011 gold badges16 silver badges23 bronze badges
answered Sep 3, 2019 at 20:09
mirh
8811 gold badge10 silver badges20 bronze badges
answered Mar 28, 2013 at 20:26
magicandre1981magicandre1981
96.4k30 gold badges175 silver badges244 bronze badges
4
-
Thanks for the answer! I’ve updated the drivers with no success. How can I disable hw mixing? (I’ve also updated the question a little bit.)
Apr 3, 2013 at 12:53
-
disable HW acceleration in the DirectSound Output plugin in WinAmp.
Apr 4, 2013 at 3:52
-
I’ve tried but unfortunately I’ve got the following: Bad DirectSound driver. Please install proper drivers or select another device in configuration. Error code: 88890010
Apr 10, 2013 at 12:53
-
I have no idea. Ask it in the Winamp forum.
Apr 11, 2013 at 4:25
Restore the settings in your Sound Manager/audio manager, say Realtek Audio manager, to rectify this error and then restart your computer.
Jens Erat
17.3k14 gold badges61 silver badges74 bronze badges
answered Jun 22, 2014 at 12:50


и на THD не ставится, фтопку
.
Жаль, что Че Алекс не вещий, столько бы нервов сэкономил 

