I’m running a headless device that I want to connect to wifi(it’s currently on ethernet), so I’m using nmcli. I scan for connections with the following:
sudo nmcli dev wifi rescan
sudo nmcli dev wifi list
and the WiFi network I want is at 95% strength. So, I connect with:
sudo nmcli dev wifi connect "SSID" password "wifipassword"
and I get the following error:
Error: Connection activation failed: (53) The Wi-Fi network could not be found.
and I’ve tried copying and pasting from list to ensure I did not mistype the SSID, and it still does not work. It works fine from other devices that use Ubuntu and network-manager, so I know it’s not the router.
How can it not find the network when I connect, but find it just fine when scanning, and how do I fix this?
asked Apr 27, 2018 at 1:06
1
this one fixed the issue for me — https://unix.stackexchange.com/a/519620/407616
add this
[device]
wifi.scan-rand-mac-address=no
to /etc/NetworkManager/NetworkManager.conf
then run
sudo systemctl restart NetworkManager
then you can connect to the ssid by
sudo nmcli dev wifi connect "SSID" password "wifipassword"
answered Apr 20, 2020 at 18:34
lisrael1lisrael1
1511 silver badge3 bronze badges
2
I never found a fix for the issue, but I believe I found the problem. I was using a virtual interface made with
sudo iw dev wlan0 interface add ap0 type __ap
to host a WiFi network, but ap0 and wlan0 had the same MAC address. Due to a problem with the RPi3 drivers, I couldn’t change the MAC address(I tried macchanged -e ap0), but if I figured out how to, I’m pretty sure the issue would have been resolved.
answered May 13, 2018 at 23:07
NerdOfLinuxNerdOfLinux
3,6186 gold badges27 silver badges52 bronze badges
1
Try this without password
sudo nmcli dev wifi connect "SSID"
answered Nov 6, 2021 at 20:33
1
When I tried to connect a rather old a/b/g WiFi client to a mixed WPA 2 + WPA 3 WiFi network, I stumbled upon this problem, too. I guessed that maybe NM was not able to figure out the right settings for such an environment, so I ran nmcli connection edit <BSSID> and then configured the following settings:
- set connection.metered no
- set 802-11-wireless.band bg
- set 802-11-wireless-security.key-mgmt wpa-psk
(Do not forget to save, before you exit)
Pretty sure the first setting can be ignored, however the connection is stable for several days now and even when I reboot the router or the device, the connection is being reestablished right away.
answered Mar 30, 2022 at 23:34
dirdidirdi
1054 bronze badges
2
I face this issue in the past and tried lost of tips. But this solution
worked for me on my Ubuntu 20.04:
Improve WiFi connection by disabling power management for the wireless card
sudo sed -i 's/3/2/' /etc/NetworkManager/conf.d/default-wifi-powersave-on.conf
Then restart the computer
NB:
The Wi-Fi power-saving mode is a built-in mode that allows devices to save power by analyzing the data usage pattern with time and then making sure that the Wi-Fi doesn’t drain too much battery of the device in question. But there is a need to be cautious, too, since this can affect your browsing experience.
answered May 20, 2022 at 7:02
I solved my problem by just turn your system in sleep mode then again turn it on this solve my problem without restart
answered Sep 14, 2022 at 14:52
1
Not the OP but I’m having the same issue.
The output of «dmesg» for me was :
[ 0.000000] Linux version 4.15.2-2-ARCH (builduser@heftig-7084) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Thu Feb 8 18:54:52 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f7df6b5-6bec-40b2-b356-a1d28c29b811 rw
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf780000-0x00000000cf78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf78e000-0x00000000cf7cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf7d0000-0x00000000cf7dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ed000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000022bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Pro 3130 Microtower PC/2A9C, BIOS 6.16 03/18/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x22c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 25C000000 mask FFC000000 uncachable
[ 0.000000] 1 base 000000000 mask E00000000 write-back
[ 0.000000] 2 base 200000000 mask FC0000000 write-back
[ 0.000000] 3 base 240000000 mask FE0000000 write-back
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 6 base 1FC000000 mask FFC000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 8832M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] BRK [0x75637000, 0x75637fff] PGTABLE
[ 0.000000] BRK [0x75638000, 0x75638fff] PGTABLE
[ 0.000000] BRK [0x75639000, 0x75639fff] PGTABLE
[ 0.000000] BRK [0x7563a000, 0x7563afff] PGTABLE
[ 0.000000] BRK [0x7563b000, 0x7563bfff] PGTABLE
[ 0.000000] BRK [0x7563c000, 0x7563cfff] PGTABLE
[ 0.000000] BRK [0x7563d000, 0x7563dfff] PGTABLE
[ 0.000000] BRK [0x7563e000, 0x7563efff] PGTABLE
[ 0.000000] BRK [0x7563f000, 0x7563ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36765000-0x373a9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9F10 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000CF780100 00006C (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CF780290 0000F4 (v04 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170831/tbfadt-603)
[ 0.000000] ACPI: DSDT 0x00000000CF7805E0 005AB5 (v02 HPQOEM SLIC-CPC 00000007 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CF78E000 000040
[ 0.000000] ACPI: FACS 0x00000000CF78E000 000040
[ 0.000000] ACPI: APIC 0x00000000CF780390 00008C (v02 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CF780420 00003C (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000CF780460 000176 (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CF78E040 000072 (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000CF78A680 000843 (v01 HPQOEM SLIC-CPC 00000001 INTL 20051117)
[ 0.000000] ACPI: HPET 0x00000000CF78AED0 000038 (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000CF78E0C0 002024 (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000CF791B40 000363 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022bffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22bff8000-0x22bffafff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022bffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cf77ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001fbffffff]
[ 0.000000] node 0: [mem 0x0000000200000000-0x000000022bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022bffffff]
[ 0.000000] On node 0 totalpages: 2062109
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13214 pages used for memmap
[ 0.000000] DMA32 zone: 845696 pages, LIFO batch:31
[ 0.000000] Normal zone: 19200 pages used for memmap
[ 0.000000] Normal zone: 1212416 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf780000-0xcf78dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf78e000-0xcf7cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf7d0000-0xcf7dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf7e0000-0xcf7ecfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf7ed000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ (ptrval) s147456 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2029610
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f7df6b5-6bec-40b2-b356-a1d28c29b811 rw
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8014444K/8248436K available (10252K kernel code, 1241K rwdata, 3220K rodata, 1432K init, 636K bss, 233992K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 31397 entries in 123 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.005000] tsc: Fast TSC calibration using PIT
[ 0.006000] tsc: Detected 3325.519 MHz processor
[ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6651.03 BogoMIPS (lpj=3325519)
[ 0.006000] pid_max: default: 32768 minimum: 301
[ 0.006000] Security Framework initialized
[ 0.006000] Yama: becoming mindful.
[ 0.007755] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008626] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008677] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.008703] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.008937] CPU: Physical Processor ID: 0
[ 0.008938] CPU: Processor Core ID: 0
[ 0.008948] mce: CPU supports 9 MCE banks
[ 0.008955] CPU0: Thermal monitoring enabled (TM1)
[ 0.008964] process: using mwait in idle threads
[ 0.008967] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.008967] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.008969] Spectre V2 : Mitigation: Full generic retpoline
[ 0.009085] Freeing SMP alternatives memory: 24K
[ 0.011000] smpboot: CPU0: Intel(R) Core(TM) i3 CPU 560 @ 3.33GHz (family: 0x6, model: 0x25, stepping: 0x5)
[ 0.014009] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[ 0.014027] core: CPUID marked event: 'bus cycles' unavailable
[ 0.014032] ... version: 3
[ 0.014032] ... bit width: 48
[ 0.014033] ... generic registers: 4
[ 0.014034] ... value mask: 0000ffffffffffff
[ 0.014034] ... max period: 000000007fffffff
[ 0.014035] ... fixed-purpose events: 3
[ 0.014036] ... event mask: 000000070000000f
[ 0.016003] Hierarchical SRCU implementation.
[ 0.022213] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.024003] smp: Bringing up secondary CPUs ...
[ 0.033018] x86: Booting SMP configuration:
[ 0.033019] .... node #0, CPUs: #1 #2 #3
[ 0.054040] smp: Brought up 1 node, 4 CPUs
[ 0.054040] smpboot: Max logical packages: 2
[ 0.054040] smpboot: Total of 4 processors activated (26604.15 BogoMIPS)
[ 0.056003] devtmpfs: initialized
[ 0.056057] x86/mm: Memory block size: 128MB
[ 0.056666] PM: Registering ACPI NVS region [mem 0xcf78e000-0xcf7cffff] (270336 bytes)
[ 0.056666] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.056666] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.056666] pinctrl core: initialized pinctrl subsystem
[ 0.056666] RTC time: 14:35:19, date: 02/12/18
[ 0.057058] NET: Registered protocol family 16
[ 0.057194] cpuidle: using governor ladder
[ 0.057194] cpuidle: using governor menu
[ 0.057194] ACPI: bus type PCI registered
[ 0.057194] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.057194] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.057194] PCI: not using MMCONFIG
[ 0.057194] PCI: Using configuration type 1 for base access
[ 0.058123] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.058124] ACPI: Added _OSI(Module Device)
[ 0.058124] ACPI: Added _OSI(Processor Device)
[ 0.058124] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.058124] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.058255] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.062543] ACPI: Dynamic OEM Table Load:
[ 0.062551] ACPI: SSDT 0xFFFF8F56E1E4C000 001550 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.063187] ACPI: Dynamic OEM Table Load:
[ 0.063191] ACPI: SSDT 0xFFFF8F56E1D49000 0004F4 (v01 HPQOEM SLIC-CPC 00003001 INTL 20051117)
[ 0.063703] ACPI: Interpreter enabled
[ 0.063722] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.063723] ACPI: Using IOAPIC for interrupt routing
[ 0.063754] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.064467] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.064485] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.064669] ACPI: GPE 0x1B active on init
[ 0.064678] ACPI: GPE 0x1E active on init
[ 0.064688] ACPI: Enabled 14 GPEs in block 00 to 3F
[ 0.072230] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.072235] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.072241] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.072559] PCI host bridge to bus 0000:00
[ 0.072561] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.072562] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.072564] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.072565] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.072566] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[ 0.072567] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[ 0.072569] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.072576] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[ 0.072595] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.072675] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
[ 0.072705] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.072805] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.072834] pci 0000:00:16.0: reg 0x10: [mem 0xf7fffc00-0xf7fffc0f 64bit]
[ 0.072921] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.073009] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.073028] pci 0000:00:1a.0: reg 0x10: [mem 0xf7ffc000-0xf7ffc3ff]
[ 0.073100] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.073183] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.073201] pci 0000:00:1b.0: reg 0x10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[ 0.073260] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.073340] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.073399] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.073483] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 0.073542] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.073632] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.073651] pci 0000:00:1d.0: reg 0x10: [mem 0xf7ff6000-0xf7ff63ff]
[ 0.073721] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.073803] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.073915] pci 0000:00:1f.0: [8086:3b08] type 00 class 0x060100
[ 0.074089] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[ 0.074104] pci 0000:00:1f.2: reg 0x10: [io 0xbc00-0xbc07]
[ 0.074109] pci 0000:00:1f.2: reg 0x14: [io 0xb880-0xb883]
[ 0.074115] pci 0000:00:1f.2: reg 0x18: [io 0xb800-0xb807]
[ 0.074121] pci 0000:00:1f.2: reg 0x1c: [io 0xb480-0xb483]
[ 0.074127] pci 0000:00:1f.2: reg 0x20: [io 0xb400-0xb41f]
[ 0.074133] pci 0000:00:1f.2: reg 0x24: [mem 0xf7ff4000-0xf7ff47ff]
[ 0.074166] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.074243] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.074257] pci 0000:00:1f.3: reg 0x10: [mem 0xf7fff800-0xf7fff8ff 64bit]
[ 0.074274] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.074387] pci 0000:01:00.0: [10de:0613] type 00 class 0x030000
[ 0.074409] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.074421] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.074432] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.074440] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.074448] pci 0000:01:00.0: reg 0x30: [mem 0xfbde0000-0xfbdfffff pref]
[ 0.074455] pci 0000:01:00.0: enabling Extended Tags
[ 0.074557] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.074559] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.074561] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbdfffff]
[ 0.074563] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.074618] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.074644] pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff]
[ 0.074668] pci 0000:02:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit]
[ 0.074683] pci 0000:02:00.0: reg 0x20: [mem 0xf6ffc000-0xf6ffffff 64bit pref]
[ 0.074693] pci 0000:02:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.074766] pci 0000:02:00.0: supports D1 D2
[ 0.074767] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.078029] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.078035] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.078040] pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.078048] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 0.078125] pci 0000:03:00.0: [1106:3403] type 00 class 0x0c0010
[ 0.078155] pci 0000:03:00.0: reg 0x10: [mem 0xfbfff800-0xfbffffff 64bit]
[ 0.078165] pci 0000:03:00.0: reg 0x18: [io 0xe800-0xe8ff]
[ 0.078259] pci 0000:03:00.0: supports D2
[ 0.078260] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
[ 0.081026] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.081033] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.081038] pci 0000:00:1c.2: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.081131] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.081138] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.081139] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.081140] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.081141] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.081143] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
[ 0.081144] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[ 0.081553] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.081616] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.081675] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.081736] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.081800] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.081862] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.081924] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.081985] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.082116] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.082116] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.082116] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.082116] vgaarb: loaded
[ 0.082137] EDAC MC: Ver: 3.0.0
[ 0.082191] PCI: Using ACPI for IRQ routing
[ 0.087432] PCI: Discovered peer bus ff
[ 0.087433] PCI: root bus ff: using default resources
[ 0.087433] PCI: Probing PCI hardware (bus ff)
[ 0.087452] PCI host bridge to bus 0000:ff
[ 0.087453] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.087455] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.087456] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.087458] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.087462] pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000
[ 0.087496] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.087529] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.087560] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.087593] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.087624] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.087661] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.087663] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.087666] PCI: pci_cache_line_size set to 64 bytes
[ 0.087701] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.087702] e820: reserve RAM buffer [mem 0xcf780000-0xcfffffff]
[ 0.088003] NetLabel: Initializing
[ 0.088003] NetLabel: domain hash size = 128
[ 0.088003] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.088003] NetLabel: unlabeled traffic allowed by default
[ 0.088025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.088030] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.090016] clocksource: Switched to clocksource hpet
[ 0.100286] VFS: Disk quotas dquot_6.6.0
[ 0.100304] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.100380] pnp: PnP ACPI init
[ 0.100482] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.100484] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.100485] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.100487] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.100493] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.100569] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.100708] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ 0.100712] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.100877] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.100879] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.100880] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.100882] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.100884] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.100885] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.100889] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.101050] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.101052] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.101055] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.101118] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.101122] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.101351] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.101353] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.101354] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.101356] system 00:06: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.101357] system 00:06: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.101361] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.101504] pnp: PnP ACPI: found 7 devices
[ 0.107514] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.107535] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.107549] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.107551] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.107553] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.107555] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbdfffff]
[ 0.107557] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.107560] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.107561] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.107565] pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.107567] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 0.107571] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.107573] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.107576] pci 0000:00:1c.2: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.107579] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.107583] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.107592] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.107593] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.107594] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.107596] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.107597] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window]
[ 0.107598] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.107599] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.107601] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbdfffff]
[ 0.107602] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.107603] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.107604] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.107605] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 0.107607] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.107608] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.107609] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.107610] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.107612] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.107613] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.107614] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.107615] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff window]
[ 0.107617] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.107675] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.107676] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.107703] NET: Registered protocol family 2
[ 0.107863] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.107987] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.108167] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.108216] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.108243] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.108305] NET: Registered protocol family 1
[ 0.108702] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.108717] PCI: CLS 32 bytes, default 64
[ 0.108754] Unpacking initramfs...
[ 0.275604] Freeing initrd memory: 12564K
[ 0.275609] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.275612] software IO TLB [mem 0xcb780000-0xcf780000] (64MB) mapped at [00000000c42cba16-00000000a927a86f]
[ 0.275770] Scanning for low memory corruption every 60 seconds
[ 0.275838] simple-framebuffer simple-framebuffer.0: framebuffer at 0xf9000000, 0x12c000 bytes, mapped to 0x00000000f60de243
[ 0.275840] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=640x480x32, linelength=2560
[ 0.276567] Console: switching to colour frame buffer device 80x30
[ 0.277190] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.277655] Initialise system trusted keyrings
[ 0.277665] Key type blacklist registered
[ 0.277725] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 0.278582] zbud: loaded
[ 0.280262] Key type asymmetric registered
[ 0.280264] Asymmetric key parser 'x509' registered
[ 0.280293] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.280337] io scheduler noop registered
[ 0.280339] io scheduler deadline registered
[ 0.280375] io scheduler cfq registered (default)
[ 0.280376] io scheduler mq-deadline registered
[ 0.280377] io scheduler kyber registered
[ 0.280398] io scheduler bfq registered
[ 0.280979] intel_idle: MWAIT substates: 0x1120
[ 0.280981] intel_idle: v0.4.1 model 0x25
[ 0.281117] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.281175] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.281185] ACPI: Power Button [PWRB]
[ 0.281220] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.281245] ACPI: Power Button [PWRF]
[ 0.281562] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.282455] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.282639] NET: Registered protocol family 10
[ 0.286635] Segment Routing with IPv6
[ 0.286675] NET: Registered protocol family 17
[ 0.287130] RAS: Correctable Errors collector initialized.
[ 0.287166] microcode: sig=0x20655, pf=0x2, revision=0x2
[ 0.287240] microcode: Microcode Update Driver: v2.2.
[ 0.287259] sched_clock: Marking stable (287223822, 0)->(397274155, -110050333)
[ 0.287536] registered taskstats version 1
[ 0.287548] Loading compiled-in X.509 certificates
[ 0.287562] zswap: loaded using pool lzo/zbud
[ 0.289949] Key type big_key registered
[ 0.290151] Magic number: 6:390:586
[ 0.290231] hctosys: unable to open rtc device (rtc0)
[ 0.292102] Freeing unused kernel memory: 1432K
[ 0.292104] Write protecting the kernel read-only data: 16384k
[ 0.292675] Freeing unused kernel memory: 2016K
[ 0.294534] Freeing unused kernel memory: 876K
[ 0.363402] ACPI: bus type USB registered
[ 0.363427] usbcore: registered new interface driver usbfs
[ 0.363439] usbcore: registered new interface driver hub
[ 0.363464] usbcore: registered new device driver usb
[ 0.365564] SCSI subsystem initialized
[ 0.365712] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.365964] ehci-pci: EHCI PCI platform driver
[ 0.366208] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.366216] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.366228] ehci-pci 0000:00:1a.0: debug port 2
[ 0.370146] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 0.370165] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7ffc000
[ 0.373804] libata version 3.00 loaded.
[ 0.377031] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.377096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.377098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.377099] usb usb1: Product: EHCI Host Controller
[ 0.377101] usb usb1: Manufacturer: Linux 4.15.2-2-ARCH ehci_hcd
[ 0.377102] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.377258] hub 1-0:1.0: USB hub found
[ 0.377265] hub 1-0:1.0: 2 ports detected
[ 0.377603] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.377612] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.377624] ehci-pci 0000:00:1d.0: debug port 2
[ 0.381529] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 0.381544] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7ff6000
[ 0.388012] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.388057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.388059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.388060] usb usb2: Product: EHCI Host Controller
[ 0.388061] usb usb2: Manufacturer: Linux 4.15.2-2-ARCH ehci_hcd
[ 0.388062] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.388164] hub 2-0:1.0: USB hub found
[ 0.388170] hub 2-0:1.0: 2 ports detected
[ 0.388302] ahci 0000:00:1f.2: version 3.0
[ 0.388476] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.398577] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.398579] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 0.413679] scsi host0: ahci
[ 0.413897] scsi host1: ahci
[ 0.414090] scsi host2: ahci
[ 0.414202] scsi host3: ahci
[ 0.414309] scsi host4: ahci
[ 0.414404] scsi host5: ahci
[ 0.414443] ata1: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4100 irq 24
[ 0.414445] ata2: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4180 irq 24
[ 0.414446] ata3: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4200 irq 24
[ 0.414447] ata4: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4280 irq 24
[ 0.414449] ata5: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4300 irq 24
[ 0.414450] ata6: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4380 irq 24
[ 0.428037] firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
[ 0.696984] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.713054] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.724309] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.725834] ata1.00: ATA-8: WDC WD5000AAKX-603CA0, 18.01H18, max UDMA/100
[ 0.725838] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.727437] ata1.00: configured for UDMA/100
[ 0.727652] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-6 1H18 PQ: 0 ANSI: 5
[ 0.825736] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 0.825741] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.826284] hub 1-1:1.0: USB hub found
[ 0.826551] hub 1-1:1.0: 6 ports detected
[ 0.841610] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 0.841615] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.842139] hub 2-1:1.0: USB hub found
[ 0.842319] hub 2-1:1.0: 8 ports detected
[ 0.935260] firewire_core 0000:03:00.0: created device fw0: GUID 0060b00000861d8f, S400
[ 1.037241] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.103031] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.119014] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.182263] usb 1-1.4: New USB device found, idVendor=2357, idProduct=0107
[ 1.182268] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.182271] usb 1-1.4: Product: 802.11n NIC
[ 1.182274] usb 1-1.4: Manufacturer: Realtek
[ 1.182277] usb 1-1.4: SerialNumber: 00e04c000001
[ 1.213708] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0181
[ 1.213712] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.213715] usb 2-1.1: Product: USB2.0-CRW
[ 1.213717] usb 2-1.1: Manufacturer: Generic
[ 1.213720] usb 2-1.1: SerialNumber: 20060413092100000
[ 1.221404] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 1.221525] scsi host6: usb-storage 2-1.1:1.0
[ 1.221595] usbcore: registered new interface driver usb-storage
[ 1.222115] usbcore: registered new interface driver uas
[ 1.247002] usb 1-1.5: new low-speed USB device number 4 using ehci-pci
[ 1.311000] tsc: Refined TSC clocksource calibration: 3325.192 MHz
[ 1.311012] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fee4261005, max_idle_ns: 440795322397 ns
[ 1.332445] usb 1-1.5: New USB device found, idVendor=413c, idProduct=2003
[ 1.332450] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.332453] usb 1-1.5: Product: Dell USB Keyboard
[ 1.332456] usb 1-1.5: Manufacturer: Dell
[ 1.334711] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.338888] usbcore: registered new interface driver usbhid
[ 1.338889] usbhid: USB HID core driver
[ 1.339674] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:413C:2003.0001/input/input2
[ 1.348227] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.352277] ata3.00: ATAPI: hp DVD-RAM GH60L, RD05, max UDMA/100
[ 1.357414] ata3.00: configured for UDMA/100
[ 1.362973] scsi 2:0:0:0: CD-ROM hp DVD-RAM GH60L RD05 PQ: 0 ANSI: 5
[ 1.391160] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.5/input0
[ 1.396958] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[ 1.479155] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c529
[ 1.479160] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.479163] usb 1-1.6: Product: USB Receiver
[ 1.479166] usb 1-1.6: Manufacturer: Logitech
[ 1.482285] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C529.0002/input/input3
[ 1.534253] hid-generic 0003:046D:C529.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input0
[ 1.537521] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C529.0003/input/input4
[ 1.589169] hid-generic 0003:046D:C529.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input1
[ 1.685305] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.997437] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.274619] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 2.277865] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 2.280982] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 2.284112] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
[ 2.287357] scsi 6:0:0:4: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 0 CCS
[ 2.289176] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.289191] sd 0:0:0:0: [sda] Write Protect is off
[ 2.289193] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.289218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.304400] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2.309079] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.319197] clocksource: Switched to clocksource tsc
[ 2.319807] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 2.322318] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 2.324811] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 2.327445] sd 6:0:0:4: [sdf] Attached SCSI removable disk
[ 2.345756] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.347428] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.357122] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.357125] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.357255] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.345475] random: crng init done
[ 3.694382] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.851476] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.910389] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 4.934249] systemd[1]: Detected architecture x86-64.
[ 4.975868] systemd[1]: Set hostname to <anarchy>.
[ 6.323109] systemd[1]: Created slice System Slice.
[ 6.376634] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.377974] systemd[1]: Listening on Process Core Dump Socket.
[ 6.378178] systemd[1]: Created slice User and Session Slice.
[ 6.378264] systemd[1]: Reached target Slices.
[ 6.378376] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.378524] systemd[1]: Listening on Journal Socket.
[ 6.784030] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 6.981882] systemd-journald[236]: Received request to flush runtime journal from PID 1
[ 9.296492] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.304089] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (PMRG) (20170831/utaddress-247)
[ 9.304097] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.304131] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.394036] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 9.469324] rtc_cmos 00:01: RTC can wake from S4
[ 9.469458] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 9.469485] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 9.540001] Linux agpgart interface v0.103
[ 9.841282] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.967763] iTCO_vendor_support: vendor-support=0
[ 9.992848] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.992888] iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0860)
[ 9.992997] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.028402] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 10.117847] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.117858] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.118323] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0x000000008b499311, 78:e3:b5:9d:9f:75, XID 081000c0 IRQ 26
[ 10.118326] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.442718] mousedev: PS/2 mouse device common for all mice
[ 10.532355] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.201293] checking generic (f9000000 12c000) vs hw (d0000000 10000000)
[ 11.201295] checking generic (f9000000 12c000) vs hw (f8000000 2000000)
[ 11.201296] fb: switching to nouveaufb from simple
[ 11.201317] Console: switching to colour dummy device 80x25
[ 11.201493] nouveau 0000:01:00.0: NVIDIA G92 (092980a2)
[ 11.272506] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.325853] nouveau 0000:01:00.0: bios: version 62.92.89.00.08
[ 11.346336] nouveau 0000:01:00.0: fb: 512 MiB GDDR3
[ 11.435693] [TTM] Zone kernel: Available graphics memory: 4015678 kiB
[ 11.435697] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 11.435698] [TTM] Initializing pool allocator
[ 11.435707] [TTM] Initializing DMA pool allocator
[ 11.435735] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[ 11.435738] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 11.435745] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 11.435748] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 11.435753] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028
[ 11.435757] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[ 11.435761] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[ 11.435765] nouveau 0000:01:00.0: DRM: DCB outp 03: 02011312 00020030
[ 11.435768] nouveau 0000:01:00.0: DRM: DCB outp 04: 010223f1 00c0c080
[ 11.435772] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 11.435775] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002130
[ 11.435778] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000210
[ 11.435781] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000211
[ 11.435784] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000213
[ 11.441377] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
[ 11.441379] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
[ 11.441406] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.441407] [drm] Driver supports precise vblank timestamp query.
[ 11.442804] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[ 11.483890] nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x70000, bo 0000000099cee530
[ 11.485524] fbcon: nouveaufb (fb0) is primary device
[ 11.591129] Console: switching to colour frame buffer device 180x56
[ 11.658830] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 11.666943] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 11.779317] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 11.779322] cfg80211: failed to load regulatory.db
[ 11.836753] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 11.836756] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.836758] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 11.836759] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.836760] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 11.836761] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.836762] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 11.836764] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 11.836765] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 11.854745] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 11.854866] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 11.854993] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.855113] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.855235] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.855348] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.855481] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.855632] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.255189] kvm: disabled by bios
[ 12.281926] kvm: disabled by bios
[ 12.314391] kvm: disabled by bios
[ 12.350757] kvm: disabled by bios
[ 12.702810] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 12.837358] usb 1-1.4: This Realtek USB WiFi dongle (0x2357:0x0107) is untested!
[ 12.837361] usb 1-1.4: Please report results to Jes.Sorensen@gmail.com
[ 13.005158] usb 1-1.4: Vendor: Realtek
[ 13.005164] usb 1-1.4: Product: #802.11n NI
[ 13.005168] usb 1-1.4: Serial:
[ 13.005174] usb 1-1.4: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 13.005178] usb 1-1.4: 00: 29 81 00 7c 01 40 03 00
[ 13.005183] usb 1-1.4: 08: 40 74 04 50 14 00 00 00
[ 13.005187] usb 1-1.4: 10: 29 29 29 29 29 29 2c 2c
[ 13.005191] usb 1-1.4: 18: 2c 2d 2d f2 ef ef ff ff
[ 13.005195] usb 1-1.4: 20: ff ff ff ff ff ff ff ff
[ 13.005199] usb 1-1.4: 28: ff ff ff ff ff ff ff ff
[ 13.005203] usb 1-1.4: 30: ff ff ff ff ff ff ff ff
[ 13.005208] usb 1-1.4: 38: ff ff 28 28 28 28 28 28
[ 13.005212] usb 1-1.4: 40: 2a 2a 2a 2a 2a f2 ef ef
[ 13.005216] usb 1-1.4: 48: ff ff ff ff ff ff ff ff
[ 13.005220] usb 1-1.4: 50: ff ff ff ff ff ff ff ff
[ 13.005224] usb 1-1.4: 58: ff ff ff ff ff ff ff ff
[ 13.005228] usb 1-1.4: 60: ff ff ff ff ff ff ff ff
[ 13.005232] usb 1-1.4: 68: ff ff ff ff ff ff ff ff
[ 13.005236] usb 1-1.4: 70: ff ff ff ff ff ff ff ff
[ 13.005240] usb 1-1.4: 78: ff ff ff ff ff ff ff ff
[ 13.005244] usb 1-1.4: 80: ff ff ff ff ff ff ff ff
[ 13.005248] usb 1-1.4: 88: ff ff ff ff ff ff ff ff
[ 13.005253] usb 1-1.4: 90: ff ff ff ff ff ff ff ff
[ 13.005257] usb 1-1.4: 98: ff ff ff ff ff ff ff ff
[ 13.005261] usb 1-1.4: a0: ff ff ff ff ff ff ff ff
[ 13.005265] usb 1-1.4: a8: ff ff ff ff ff ff ff ff
[ 13.005269] usb 1-1.4: b0: ff ff ff ff ff ff ff ff
[ 13.005273] usb 1-1.4: b8: a2 1f 1f 00 00 00 ff ff
[ 13.005277] usb 1-1.4: c0: ff 01 00 10 00 00 00 ff
[ 13.005281] usb 1-1.4: c8: 00 00 ff ff ff ff ff ff
[ 13.005286] usb 1-1.4: d0: 57 23 07 01 e7 47 02 c0
[ 13.005290] usb 1-1.4: d8: 25 e9 14 36 9c 0a 03 52
[ 13.005294] usb 1-1.4: e0: 65 61 6c 74 65 6b 20 0e
[ 13.005298] usb 1-1.4: e8: 03 38 30 32 2e 31 31 6e
[ 13.005302] usb 1-1.4: f0: 20 4e 49 43 20 00 00 ff
[ 13.005306] usb 1-1.4: f8: ff ff ff ff ff ff ff ff
[ 13.005310] usb 1-1.4: 100: ff ff ff ff ff ff ff ff
[ 13.005315] usb 1-1.4: 108: ff ff ff ff ff ff ff ff
[ 13.005318] usb 1-1.4: 110: ff ff ff ff ff ff ff 0d
[ 13.005322] usb 1-1.4: 118: 03 00 05 00 30 00 00 00
[ 13.005326] usb 1-1.4: 120: 00 93 ff ff ff ff ff ff
[ 13.005331] usb 1-1.4: 128: ff ff ff ff ff ff ff ff
[ 13.005335] usb 1-1.4: 130: f6 a8 98 2d 03 92 98 00
[ 13.005339] usb 1-1.4: 138: fc 8c 00 11 9b 44 02 0a
[ 13.005343] usb 1-1.4: 140: ff ff ff ff ff ff ff ff
[ 13.005348] usb 1-1.4: 148: ff ff ff ff ff ff ff ff
[ 13.005352] usb 1-1.4: 150: ff ff ff ff ff ff ff ff
[ 13.005356] usb 1-1.4: 158: ff ff ff ff ff ff ff ff
[ 13.005360] usb 1-1.4: 160: ff ff ff ff ff ff ff ff
[ 13.005364] usb 1-1.4: 168: ff ff ff ff ff ff ff ff
[ 13.005368] usb 1-1.4: 170: ff ff ff ff ff ff ff ff
[ 13.005372] usb 1-1.4: 178: ff ff ff ff ff ff ff ff
[ 13.005376] usb 1-1.4: 180: ff ff ff ff ff ff ff ff
[ 13.005380] usb 1-1.4: 188: ff ff ff ff ff ff ff ff
[ 13.005383] usb 1-1.4: 190: ff ff ff ff ff ff ff ff
[ 13.005388] usb 1-1.4: 198: ff ff ff ff ff ff ff ff
[ 13.005392] usb 1-1.4: 1a0: ff ff ff ff ff ff ff ff
[ 13.005396] usb 1-1.4: 1a8: ff ff ff ff ff ff ff ff
[ 13.005400] usb 1-1.4: 1b0: ff ff ff ff ff ff ff ff
[ 13.005404] usb 1-1.4: 1b8: ff ff ff ff ff ff ff ff
[ 13.005408] usb 1-1.4: 1c0: ff ff ff ff ff ff ff ff
[ 13.005412] usb 1-1.4: 1c8: ff ff ff ff ff ff ff ff
[ 13.005416] usb 1-1.4: 1d0: ff ff ff ff ff ff ff ff
[ 13.005420] usb 1-1.4: 1d8: ff ff ff ff ff ff ff ff
[ 13.005424] usb 1-1.4: 1e0: ff ff ff ff ff ff ff ff
[ 13.005428] usb 1-1.4: 1e8: ff ff ff ff ff ff ff ff
[ 13.005432] usb 1-1.4: 1f0: ff ff ff ff ff ff ff ff
[ 13.005436] usb 1-1.4: 1f8: ff ff ff ff ff ff ff ff
[ 13.005443] usb 1-1.4: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 13.005448] usb 1-1.4: RTL8192EU MAC: c0:25:e9:14:36:9c
[ 13.005453] usb 1-1.4: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 13.291178] usb 1-1.4: Firmware revision 19.0 (signature 0x92e1)
[ 13.589695] Adding 8216572k swap on /dev/sda6. Priority:-2 extents:1 across:8216572k FS
[ 14.328861] usbcore: registered new interface driver rtl8xxxu
[ 14.399618] rtl8xxxu 1-1.4:1.0 wlp0s26u1u4: renamed from wlan0
[ 15.635318] r8169 0000:02:00.0 enp2s0: link down
[ 15.635320] r8169 0000:02:00.0 enp2s0: link down
[ 15.635416] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 15.651871] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 17.418029] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 17.553872] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 17.641183] r8169 0000:02:00.0 enp2s0: link up
[ 17.652025] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 17.668534] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 20.253850] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 22.860159] fuse init (API version 7.26)
[ 365.133881] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 680.155820] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 995.129569] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1310.272625] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1338.853348] systemd: 25 output lines suppressed due to ratelimiting
[ 1338.858428] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 1338.870307] systemd[1]: Detected architecture x86-64.
[ 1384.768650] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1385.976218] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1385.997898] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1386.198973] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1386.406958] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1386.614957] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1387.911407] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1387.933597] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1388.134997] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1388.342956] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1388.550968] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1390.247726] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1390.271097] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1390.478958] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1390.686957] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1390.894956] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1393.095713] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1393.118131] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1393.318968] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1393.526960] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1393.734906] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1403.931828] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1403.943475] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1404.149523] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1404.350957] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1404.558948] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1410.004007] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1410.241525] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1718.845374] PM: suspend entry (deep)
[ 1718.845378] PM: Syncing filesystems ... done.
[ 1719.203682] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1719.205362] OOM killer disabled.
[ 1719.205363] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1719.206620] Suspending console(s) (use no_console_suspend to debug)
[ 1719.220891] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1719.259126] usb 1-1.4: disconnecting
[ 1719.259129] usb 1-1.4: Device still attached, trying to reset
[ 1719.286814] sd 0:0:0:0: [sda] Stopping disk
[ 1719.324894] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[ 1721.528274] ACPI: Preparing to enter system sleep state S3
[ 1721.528688] PM: Saving platform NVS memory
[ 1721.528895] Disabling non-boot CPUs ...
[ 1721.548366] smpboot: CPU 1 is now offline
[ 1721.576168] smpboot: CPU 2 is now offline
[ 1721.596160] smpboot: CPU 3 is now offline
[ 1721.597215] ACPI: Low-level resume complete
[ 1721.597261] PM: Restoring platform NVS memory
[ 1721.597636] Enabling non-boot CPUs ...
[ 1721.597683] x86: Booting SMP configuration:
[ 1721.597684] smpboot: Booting Node 0 Processor 1 APIC 0x4
[ 1721.600130] cache: parent cpu1 should not be sleeping
[ 1721.600464] CPU1 is up
[ 1721.600497] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1721.602900] cache: parent cpu2 should not be sleeping
[ 1721.603217] CPU2 is up
[ 1721.603248] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 1721.605648] cache: parent cpu3 should not be sleeping
[ 1721.605965] CPU3 is up
[ 1721.608190] ACPI: Waking up from system sleep state S3
[ 1721.624126] sd 0:0:0:0: [sda] Starting disk
[ 1721.678673] r8169 0000:02:00.0 enp2s0: link down
[ 1721.803196] usb 1-1.4:1.0: rebind failed: -517
[ 1721.803371] OOM killer enabled.
[ 1721.803372] Restarting tasks ... done.
[ 1721.808090] PM: suspend exit
[ 1721.809782] usb 1-1.4: This Realtek USB WiFi dongle (0x2357:0x0107) is untested!
[ 1721.809784] usb 1-1.4: Please report results to Jes.Sorensen@gmail.com
[ 1721.945403] ata5: SATA link down (SStatus 0 SControl 300)
[ 1721.945433] ata4: SATA link down (SStatus 0 SControl 300)
[ 1721.945685] ata2: SATA link down (SStatus 0 SControl 300)
[ 1721.945820] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1721.953414] ata6: SATA link down (SStatus 0 SControl 300)
[ 1721.976108] ata3.00: configured for UDMA/100
[ 1721.997294] usb 1-1.4: Vendor: Realtek
[ 1721.997298] usb 1-1.4: Product: #802.11n NI
[ 1721.997301] usb 1-1.4: Serial:
[ 1721.997305] usb 1-1.4: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 1721.997308] usb 1-1.4: 00: 29 81 00 7c 01 40 03 00
[ 1721.997311] usb 1-1.4: 08: 40 74 04 50 14 00 00 00
[ 1721.997315] usb 1-1.4: 10: 29 29 29 29 29 29 2c 2c
[ 1721.997317] usb 1-1.4: 18: 2c 2d 2d f2 ef ef ff ff
[ 1721.997320] usb 1-1.4: 20: ff ff ff ff ff ff ff ff
[ 1721.997323] usb 1-1.4: 28: ff ff ff ff ff ff ff ff
[ 1721.997326] usb 1-1.4: 30: ff ff ff ff ff ff ff ff
[ 1721.997329] usb 1-1.4: 38: ff ff 28 28 28 28 28 28
[ 1721.997332] usb 1-1.4: 40: 2a 2a 2a 2a 2a f2 ef ef
[ 1721.997335] usb 1-1.4: 48: ff ff ff ff ff ff ff ff
[ 1721.997338] usb 1-1.4: 50: ff ff ff ff ff ff ff ff
[ 1721.997340] usb 1-1.4: 58: ff ff ff ff ff ff ff ff
[ 1721.997343] usb 1-1.4: 60: ff ff ff ff ff ff ff ff
[ 1721.997346] usb 1-1.4: 68: ff ff ff ff ff ff ff ff
[ 1721.997349] usb 1-1.4: 70: ff ff ff ff ff ff ff ff
[ 1721.997352] usb 1-1.4: 78: ff ff ff ff ff ff ff ff
[ 1721.997355] usb 1-1.4: 80: ff ff ff ff ff ff ff ff
[ 1721.997357] usb 1-1.4: 88: ff ff ff ff ff ff ff ff
[ 1721.997360] usb 1-1.4: 90: ff ff ff ff ff ff ff ff
[ 1721.997363] usb 1-1.4: 98: ff ff ff ff ff ff ff ff
[ 1721.997366] usb 1-1.4: a0: ff ff ff ff ff ff ff ff
[ 1721.997369] usb 1-1.4: a8: ff ff ff ff ff ff ff ff
[ 1721.997372] usb 1-1.4: b0: ff ff ff ff ff ff ff ff
[ 1721.997374] usb 1-1.4: b8: a2 1f 1f 00 00 00 ff ff
[ 1721.997377] usb 1-1.4: c0: ff 01 00 10 00 00 00 ff
[ 1721.997380] usb 1-1.4: c8: 00 00 ff ff ff ff ff ff
[ 1721.997383] usb 1-1.4: d0: 57 23 07 01 e7 47 02 c0
[ 1721.997386] usb 1-1.4: d8: 25 e9 14 36 9c 0a 03 52
[ 1721.997389] usb 1-1.4: e0: 65 61 6c 74 65 6b 20 0e
[ 1721.997392] usb 1-1.4: e8: 03 38 30 32 2e 31 31 6e
[ 1721.997394] usb 1-1.4: f0: 20 4e 49 43 20 00 00 ff
[ 1721.997397] usb 1-1.4: f8: ff ff ff ff ff ff ff ff
[ 1721.997400] usb 1-1.4: 100: ff ff ff ff ff ff ff ff
[ 1721.997403] usb 1-1.4: 108: ff ff ff ff ff ff ff ff
[ 1721.997406] usb 1-1.4: 110: ff ff ff ff ff ff ff 0d
[ 1721.997409] usb 1-1.4: 118: 03 00 05 00 30 00 00 00
[ 1721.997412] usb 1-1.4: 120: 00 93 ff ff ff ff ff ff
[ 1721.997414] usb 1-1.4: 128: ff ff ff ff ff ff ff ff
[ 1721.997417] usb 1-1.4: 130: f6 a8 98 2d 03 92 98 00
[ 1721.997420] usb 1-1.4: 138: fc 8c 00 11 9b 44 02 0a
[ 1721.997423] usb 1-1.4: 140: ff ff ff ff ff ff ff ff
[ 1721.997426] usb 1-1.4: 148: ff ff ff ff ff ff ff ff
[ 1721.997429] usb 1-1.4: 150: ff ff ff ff ff ff ff ff
[ 1721.997431] usb 1-1.4: 158: ff ff ff ff ff ff ff ff
[ 1721.997434] usb 1-1.4: 160: ff ff ff ff ff ff ff ff
[ 1721.997437] usb 1-1.4: 168: ff ff ff ff ff ff ff ff
[ 1721.997440] usb 1-1.4: 170: ff ff ff ff ff ff ff ff
[ 1721.997443] usb 1-1.4: 178: ff ff ff ff ff ff ff ff
[ 1721.997446] usb 1-1.4: 180: ff ff ff ff ff ff ff ff
[ 1721.997449] usb 1-1.4: 188: ff ff ff ff ff ff ff ff
[ 1721.997451] usb 1-1.4: 190: ff ff ff ff ff ff ff ff
[ 1721.997454] usb 1-1.4: 198: ff ff ff ff ff ff ff ff
[ 1721.997457] usb 1-1.4: 1a0: ff ff ff ff ff ff ff ff
[ 1721.997460] usb 1-1.4: 1a8: ff ff ff ff ff ff ff ff
[ 1721.997463] usb 1-1.4: 1b0: ff ff ff ff ff ff ff ff
[ 1721.997466] usb 1-1.4: 1b8: ff ff ff ff ff ff ff ff
[ 1721.997469] usb 1-1.4: 1c0: ff ff ff ff ff ff ff ff
[ 1721.997471] usb 1-1.4: 1c8: ff ff ff ff ff ff ff ff
[ 1721.997474] usb 1-1.4: 1d0: ff ff ff ff ff ff ff ff
[ 1721.997477] usb 1-1.4: 1d8: ff ff ff ff ff ff ff ff
[ 1721.997480] usb 1-1.4: 1e0: ff ff ff ff ff ff ff ff
[ 1721.997483] usb 1-1.4: 1e8: ff ff ff ff ff ff ff ff
[ 1721.997486] usb 1-1.4: 1f0: ff ff ff ff ff ff ff ff
[ 1721.997488] usb 1-1.4: 1f8: ff ff ff ff ff ff ff ff
[ 1721.997494] usb 1-1.4: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 1721.997498] usb 1-1.4: RTL8192EU MAC: c0:25:e9:14:36:9c
[ 1721.997502] usb 1-1.4: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 1721.997518] usb 1-1.4: Firmware revision 19.0 (signature 0x92e1)
[ 1722.176090] firewire_core 0000:03:00.0: rediscovered device fw0
[ 1722.827361] hrtimer: interrupt took 957 ns
[ 1724.062168] r8169 0000:02:00.0 enp2s0: link up
[ 1726.989078] ata1: link is slow to respond, please be patient (ready=0)
[ 1728.289113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1728.786118] ata1.00: configured for UDMA/100
[ 1728.979844] rtl8xxxu 1-1.4:1.0 wlp0s26u1u4: renamed from wlan0
[ 1729.048438] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1730.055187] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1730.112410] r8169 0000:02:00.0 enp2s0: link down
[ 1730.112482] r8169 0000:02:00.0 enp2s0: link down
[ 1730.112500] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1730.118795] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1730.230876] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1730.271620] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1732.732680] r8169 0000:02:00.0 enp2s0: link up
[ 1732.732695] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 1739.059561] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1739.120914] ISOFS: changing to secondary root
[ 2075.179168] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 2390.160866] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 2705.177194] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 3020.225385] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 3335.241672] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 3651.236866] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 3967.273190] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 4272.499899] perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 4283.257169] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 4599.266581] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 4915.306152] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 5231.310380] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 5547.313679] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 5863.235744] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 6179.301817] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 6438.214071] perf: interrupt took too long (3158 > 3150), lowering kernel.perf_event_max_sample_rate to 63000
[ 6495.240293] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 6811.315360] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 7127.253405] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 7443.312130] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 7759.307916] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 8075.249039] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 8391.271479] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 8707.293039] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 9023.238740] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 9339.252150] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 9655.238000] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 9971.247325] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[10287.269608] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[10603.304746] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[10797.475103] perf: interrupt took too long (3950 > 3947), lowering kernel.perf_event_max_sample_rate to 50000
[10919.293021] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[11235.303352] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[11551.245648] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[11867.266591] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[12183.312914] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[12499.269267] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[12815.257337] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[13131.309776] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[13447.266453] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[13763.245639] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[14079.310880] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[14395.276282] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[14711.298907] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[15027.251464] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[15343.243904] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[15659.276728] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[15975.236513] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[16291.266739] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[16607.293282] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[16923.298235] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[17239.308215] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[17555.279243] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[17871.267691] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[18187.249136] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[18503.268213] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[18819.297526] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[19135.222852] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[19450.305175] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[19766.243271] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[20082.237252] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[20398.248420] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[20714.291244] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[21030.246992] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[21346.257254] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[21662.250920] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[21978.298557] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[22294.241122] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[22610.253255] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[22926.312699] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[23242.311312] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[23558.306840] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[23874.252709] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[24190.258803] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[24506.244686] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[24822.269880] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[25138.289363] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[25454.316520] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[25770.312641] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[26086.317445] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[26402.249854] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[26718.240857] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[26890.558495] perf: interrupt took too long (4939 > 4937), lowering kernel.perf_event_max_sample_rate to 40000
[27034.257884] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[27350.257735] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[27666.283667] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[27982.244715] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[28298.293047] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[28614.236808] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[28930.247306] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[29246.250803] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[29562.282692] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[29878.288724] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[30194.308165] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[30510.318693] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[30826.271382] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[31142.231590] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[31458.258652] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[31774.293995] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[32090.253045] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[32406.297376] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[32722.233815] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[33038.251513] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[33354.268677] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[33670.277900] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[33986.245248] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[34302.252763] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[34618.262977] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[34934.255706] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[35250.254849] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[35566.248440] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[35882.279523] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[36198.246083] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[36514.288634] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[36830.265110] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[37146.295932] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[37462.248128] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[37778.253952] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[38094.289360] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[38410.252808] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[38726.236070] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[39042.249117] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[39358.252431] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[39674.264113] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[39990.294624] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[40306.316271] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[40622.255935] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[40938.302401] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[41254.245326] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[41570.260675] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[41886.260341] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[42202.246661] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[42518.233898] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[42834.262588] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[43150.258622] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[43466.257324] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[43782.257544] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[44098.255878] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[44414.300906] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[44730.247357] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[45046.253833] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[45362.288783] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[45678.259353] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[45994.251430] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[46310.273720] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[46626.260438] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[46942.305019] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[47258.256681] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[47574.275410] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[47890.244062] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[48206.267293] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[48522.233616] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[48838.280277] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[49154.262012] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[49470.251545] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[49786.247923] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[50102.298226] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[50418.251143] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[50734.236606] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[51050.263556] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[51366.264630] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[51682.264923] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[51998.243641] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[52314.249562] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[52630.308289] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[52946.288456] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[53262.242530] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[53578.231003] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[53894.257205] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[54210.258486] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[54526.288723] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[54842.305254] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[55158.281459] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[55474.273023] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[55790.306897] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[56106.250538] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[56422.244531] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[56738.240465] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[57054.269795] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[57370.243012] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[57686.267425] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[58002.264118] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[58318.249699] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[58634.303394] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[58950.256054] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[59266.246883] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[59582.265198] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[59898.254675] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[60214.310627] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[60530.253937] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[60846.254006] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[61162.284829] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[61478.244159] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[61794.285387] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[62110.244298] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[62426.257585] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[62742.257660] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[63058.235889] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[63374.252549] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[63690.300085] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[64006.267102] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[64322.269384] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[64638.251996] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[64954.264687] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[65270.284147] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[65586.291075] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[65902.243872] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[66218.268742] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[66534.259414] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[66850.312236] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[67166.313302] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[67482.314631] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[67798.266815] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68114.236985] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68430.229974] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68746.237795] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68813.623177] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68814.840080] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68814.861640] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68815.062744] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68815.270775] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68815.478795] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68816.775426] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68816.797422] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68816.998796] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68817.206809] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68817.414783] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68819.119591] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68819.141434] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68819.342778] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68819.550768] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68819.758767] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68821.951597] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68821.973675] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68822.174815] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68822.377458] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68822.582154] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68832.783928] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68832.795672] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68832.998749] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68833.206791] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68833.414782] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68839.003285] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68839.242980] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69181.253004] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69276.136412] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69277.335991] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69277.358029] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69277.558816] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69277.766815] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69277.974787] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69289.175216] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69289.197898] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69289.398788] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69289.606766] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69289.814802] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69301.003809] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69301.241405] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69315.864781] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69317.064085] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69317.086542] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69317.286813] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69317.494788] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69317.702824] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69328.903645] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69328.926015] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69329.126798] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69329.334755] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69329.542787] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69341.002536] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69341.228306] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69411.192308] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69412.391884] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69412.413732] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69412.614771] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69412.822799] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69413.027854] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69424.231600] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69424.253428] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69424.454825] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69424.662798] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69424.870816] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69436.053387] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69436.295944] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69450.886094] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69452.079589] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69452.102562] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69452.302725] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69452.510737] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69452.718791] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69457.467494] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69457.667099] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69469.724943] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69470.927905] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69470.951941] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69471.158828] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69471.366751] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69471.574782] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69482.783530] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69482.805822] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69483.006821] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69483.214779] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69483.422784] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69495.043883] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69495.279827] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69837.262526] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69904.879797] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69935.039724] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69935.290180] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69970.028067] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69971.224181] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69971.245958] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69971.446718] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69971.654725] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69971.862790] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69983.063596] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69983.086056] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69983.286829] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69983.494744] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69983.702775] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69995.002015] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69995.256193] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70155.426073] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70156.624181] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[70156.646094] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[70156.846772] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[70157.054758] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[70157.262755] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[70168.463274] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[70168.485351] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[70168.686757] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[70168.894828] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[70169.102760] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[70181.002645] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70181.232985] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70522.232957] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70838.259648] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70950.449030] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70981.033114] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70981.272914] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[71014.864692] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[71016.071699] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[71016.094300] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[71016.294753] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[71016.502703] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[71016.710749] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[71027.911502] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[71027.933894] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[71028.134746] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[71028.342754] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[71028.550762] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[71040.031388] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[71040.273420] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready The output of ‘journalctl -xe’ was:
-- Logs begin at Thu 2018-01-25 03:23:56 EST, end at Wed 2018-02-14 08:27:01 EST. --
Feb 14 03:42:47 anarchy NetworkManager[343]: <info> [1518597767.6306] device (wlp0s26u1u4): set-hw-addr: set MAC address to 46:88:F4:63:58:D2 (scanning)
Feb 14 03:42:47 anarchy NetworkManager[343]: <info> [1518597767.6480] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 03:42:47 anarchy NetworkManager[343]: <info> [1518597767.6675] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 03:42:47 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 03:48:03 anarchy NetworkManager[343]: <info> [1518598083.6550] device (wlp0s26u1u4): set-hw-addr: set MAC address to 3A:3E:86:2A:64:CD (scanning)
Feb 14 03:48:03 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 03:48:03 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 3a:3e:86:2a:64:cd
Feb 14 03:48:03 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 03:48:03 anarchy NetworkManager[343]: <info> [1518598083.6749] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 03:48:03 anarchy NetworkManager[343]: <info> [1518598083.6904] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 03:53:19 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: fa:d8:eb:a5:09:35
Feb 14 03:53:19 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 03:53:19 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 03:53:19 anarchy NetworkManager[343]: <info> [1518598399.6514] device (wlp0s26u1u4): set-hw-addr: set MAC address to FA:D8:EB:A5:09:35 (scanning)
Feb 14 03:53:19 anarchy NetworkManager[343]: <info> [1518598399.6706] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 03:53:19 anarchy NetworkManager[343]: <info> [1518598399.6822] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 03:58:35 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 62:9a:ea:85:56:4f
Feb 14 03:58:35 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 03:58:35 anarchy NetworkManager[343]: <info> [1518598715.6372] device (wlp0s26u1u4): set-hw-addr: set MAC address to 62:9A:EA:85:56:4F (scanning)
Feb 14 03:58:35 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 03:58:35 anarchy NetworkManager[343]: <info> [1518598715.6553] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 03:58:35 anarchy NetworkManager[343]: <info> [1518598715.6752] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:03:51 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 4e:ce:e7:4d:34:d3
Feb 14 04:03:51 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:03:51 anarchy NetworkManager[343]: <info> [1518599031.6909] device (wlp0s26u1u4): set-hw-addr: set MAC address to 4E:CE:E7:4D:34:D3 (scanning)
Feb 14 04:03:51 anarchy NetworkManager[343]: <info> [1518599031.7089] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:03:51 anarchy NetworkManager[343]: <info> [1518599031.7270] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:03:51 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:09:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 2a:6b:68:31:44:fe
Feb 14 04:09:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:09:07 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:09:07 anarchy NetworkManager[343]: <info> [1518599347.6438] device (wlp0s26u1u4): set-hw-addr: set MAC address to 2A:6B:68:31:44:FE (scanning)
Feb 14 04:09:07 anarchy NetworkManager[343]: <info> [1518599347.6616] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:09:07 anarchy NetworkManager[343]: <info> [1518599347.6872] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:14:23 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: f2:f6:9d:92:4b:d6
Feb 14 04:14:23 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:14:23 anarchy NetworkManager[343]: <info> [1518599663.6344] device (wlp0s26u1u4): set-hw-addr: set MAC address to F2:F6:9D:92:4B:D6 (scanning)
Feb 14 04:14:23 anarchy NetworkManager[343]: <info> [1518599663.6530] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:14:23 anarchy NetworkManager[343]: <info> [1518599663.6711] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:14:23 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:19:39 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c6:0a:56:df:ab:b8
Feb 14 04:19:39 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:19:39 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:19:39 anarchy NetworkManager[343]: <info> [1518599979.6528] device (wlp0s26u1u4): set-hw-addr: set MAC address to C6:0A:56:DF:AB:B8 (scanning)
Feb 14 04:19:39 anarchy NetworkManager[343]: <info> [1518599979.6708] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:19:39 anarchy NetworkManager[343]: <info> [1518599979.6910] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:24:55 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 7e:66:75:4e:c1:7e
Feb 14 04:24:55 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:24:55 anarchy NetworkManager[343]: <info> [1518600295.6422] device (wlp0s26u1u4): set-hw-addr: set MAC address to 7E:66:75:4E:C1:7E (scanning)
Feb 14 04:24:55 anarchy NetworkManager[343]: <info> [1518600295.6599] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:24:55 anarchy NetworkManager[343]: <info> [1518600295.6779] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:24:55 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:30:11 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c2:78:62:8c:06:8f
Feb 14 04:30:11 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:30:11 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:30:11 anarchy NetworkManager[343]: <info> [1518600611.6982] device (wlp0s26u1u4): set-hw-addr: set MAC address to C2:78:62:8C:06:8F (scanning)
Feb 14 04:30:11 anarchy NetworkManager[343]: <info> [1518600611.7159] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:30:11 anarchy NetworkManager[343]: <info> [1518600611.7310] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:35:27 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 1e:08:bd:cf:70:a0
Feb 14 04:35:27 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:35:27 anarchy NetworkManager[343]: <info> [1518600927.6412] device (wlp0s26u1u4): set-hw-addr: set MAC address to 1E:08:BD:CF:70:A0 (scanning)
Feb 14 04:35:27 anarchy NetworkManager[343]: <info> [1518600927.6605] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:35:27 anarchy NetworkManager[343]: <info> [1518600927.6714] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:35:27 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:40:43 anarchy NetworkManager[343]: <info> [1518601243.6417] device (wlp0s26u1u4): set-hw-addr: set MAC address to AE:8F:08:F7:0A:2E (scanning)
Feb 14 04:40:43 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:40:43 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ae:8f:08:f7:0a:2e
Feb 14 04:40:43 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:40:43 anarchy NetworkManager[343]: <info> [1518601243.6609] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:40:43 anarchy NetworkManager[343]: <info> [1518601243.6752] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:45:59 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: f6:83:fb:e4:3f:4b
Feb 14 04:45:59 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:45:59 anarchy NetworkManager[343]: <info> [1518601559.6723] device (wlp0s26u1u4): set-hw-addr: set MAC address to F6:83:FB:E4:3F:4B (scanning)
Feb 14 04:45:59 anarchy NetworkManager[343]: <info> [1518601559.6902] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:45:59 anarchy NetworkManager[343]: <info> [1518601559.7052] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:45:59 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:51:15 anarchy NetworkManager[343]: <info> [1518601875.6316] device (wlp0s26u1u4): set-hw-addr: set MAC address to C2:2B:6F:07:86:DF (scanning)
Feb 14 04:51:15 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:51:15 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c2:2b:6f:07:86:df
Feb 14 04:51:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:51:15 anarchy NetworkManager[343]: <info> [1518601875.6493] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:51:15 anarchy NetworkManager[343]: <info> [1518601875.6637] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:56:31 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 2a:59:90:85:b0:3c
Feb 14 04:56:31 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:56:31 anarchy NetworkManager[343]: <info> [1518602191.6731] device (wlp0s26u1u4): set-hw-addr: set MAC address to 2A:59:90:85:B0:3C (scanning)
Feb 14 04:56:31 anarchy NetworkManager[343]: <info> [1518602191.6913] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:56:31 anarchy NetworkManager[343]: <info> [1518602191.7146] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:56:31 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:01:47 anarchy NetworkManager[343]: <info> [1518602507.6319] device (wlp0s26u1u4): set-hw-addr: set MAC address to DA:00:9C:80:2C:67 (scanning)
Feb 14 05:01:47 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:01:47 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:01:47 anarchy NetworkManager[343]: <info> [1518602507.6496] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:01:47 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: da:00:9c:80:2c:67
Feb 14 05:01:47 anarchy NetworkManager[343]: <info> [1518602507.6672] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:07:03 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 3a:16:cf:11:ca:6c
Feb 14 05:07:03 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:07:03 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:07:03 anarchy NetworkManager[343]: <info> [1518602823.6453] device (wlp0s26u1u4): set-hw-addr: set MAC address to 3A:16:CF:11:CA:6C (scanning)
Feb 14 05:07:03 anarchy NetworkManager[343]: <info> [1518602823.6630] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:07:03 anarchy NetworkManager[343]: <info> [1518602823.6830] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:12:19 anarchy NetworkManager[343]: <info> [1518603139.6449] device (wlp0s26u1u4): set-hw-addr: set MAC address to CE:82:3E:6B:9B:42 (scanning)
Feb 14 05:12:19 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:12:19 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ce:82:3e:6b:9b:42
Feb 14 05:12:19 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:12:19 anarchy NetworkManager[343]: <info> [1518603139.6630] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:12:19 anarchy NetworkManager[343]: <info> [1518603139.6833] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:17:35 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 7a:25:24:98:95:3f
Feb 14 05:17:35 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:17:35 anarchy NetworkManager[343]: <info> [1518603455.6234] device (wlp0s26u1u4): set-hw-addr: set MAC address to 7A:25:24:98:95:3F (scanning)
Feb 14 05:17:35 anarchy NetworkManager[343]: <info> [1518603455.6412] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:17:35 anarchy NetworkManager[343]: <info> [1518603455.6593] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:17:35 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:22:51 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: b6:6a:98:5b:d9:ef
Feb 14 05:22:51 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:22:51 anarchy NetworkManager[343]: <info> [1518603771.6400] device (wlp0s26u1u4): set-hw-addr: set MAC address to B6:6A:98:5B:D9:EF (scanning)
Feb 14 05:22:51 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:22:51 anarchy NetworkManager[343]: <info> [1518603771.6578] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:22:51 anarchy NetworkManager[343]: <info> [1518603771.6753] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:28:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ee:6f:28:d0:d2:27
Feb 14 05:28:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:28:07 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:28:07 anarchy NetworkManager[343]: <info> [1518604087.6877] device (wlp0s26u1u4): set-hw-addr: set MAC address to EE:6F:28:D0:D2:27 (scanning)
Feb 14 05:28:07 anarchy NetworkManager[343]: <info> [1518604087.7059] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:28:07 anarchy NetworkManager[343]: <info> [1518604087.7211] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:33:23 anarchy NetworkManager[343]: <info> [1518604403.6549] device (wlp0s26u1u4): set-hw-addr: set MAC address to EE:72:FE:24:73:CD (scanning)
Feb 14 05:33:23 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:33:23 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ee:72:fe:24:73:cd
Feb 14 05:33:23 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:33:23 anarchy NetworkManager[343]: <info> [1518604403.6728] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:33:23 anarchy NetworkManager[343]: <info> [1518604403.6873] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:38:39 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: fe:0b:17:5b:3a:02
Feb 14 05:38:39 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:38:39 anarchy NetworkManager[343]: <info> [1518604719.6572] device (wlp0s26u1u4): set-hw-addr: set MAC address to FE:0B:17:5B:3A:02 (scanning)
Feb 14 05:38:39 anarchy NetworkManager[343]: <info> [1518604719.6758] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:38:39 anarchy NetworkManager[343]: <info> [1518604719.6952] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:38:39 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:43:55 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 36:71:5d:04:a6:8d
Feb 14 05:43:55 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:43:55 anarchy NetworkManager[343]: <info> [1518605035.6398] device (wlp0s26u1u4): set-hw-addr: set MAC address to 36:71:5D:04:A6:8D (scanning)
Feb 14 05:43:55 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:43:55 anarchy NetworkManager[343]: <info> [1518605035.6596] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:43:55 anarchy NetworkManager[343]: <info> [1518605035.6752] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:49:11 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 7a:13:d8:92:64:34
Feb 14 05:49:11 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:49:11 anarchy NetworkManager[343]: <info> [1518605351.6525] device (wlp0s26u1u4): set-hw-addr: set MAC address to 7A:13:D8:92:64:34 (scanning)
Feb 14 05:49:11 anarchy NetworkManager[343]: <info> [1518605351.6703] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:49:11 anarchy NetworkManager[343]: <info> [1518605351.6889] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:49:11 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:54:27 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 52:c7:6d:7b:73:07
Feb 14 05:54:27 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:54:27 anarchy NetworkManager[343]: <info> [1518605667.6718] device (wlp0s26u1u4): set-hw-addr: set MAC address to 52:C7:6D:7B:73:07 (scanning)
Feb 14 05:54:27 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:54:27 anarchy NetworkManager[343]: <info> [1518605667.6901] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:54:27 anarchy NetworkManager[343]: <info> [1518605667.7090] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:59:43 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: da:a8:0d:a9:d9:09
Feb 14 05:59:43 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:59:43 anarchy NetworkManager[343]: <info> [1518605983.6788] device (wlp0s26u1u4): set-hw-addr: set MAC address to DA:A8:0D:A9:D9:09 (scanning)
Feb 14 05:59:43 anarchy NetworkManager[343]: <info> [1518605983.6999] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:59:43 anarchy NetworkManager[343]: <info> [1518605983.7118] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:59:43 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:04:59 anarchy NetworkManager[343]: <info> [1518606299.6310] device (wlp0s26u1u4): set-hw-addr: set MAC address to 8E:A9:F1:65:D8:4B (scanning)
Feb 14 06:04:59 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:04:59 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 8e:a9:f1:65:d8:4b
Feb 14 06:04:59 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:04:59 anarchy NetworkManager[343]: <info> [1518606299.6495] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:04:59 anarchy NetworkManager[343]: <info> [1518606299.6674] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:10:15 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 76:60:91:4e:7d:41
Feb 14 06:10:15 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:10:15 anarchy NetworkManager[343]: <info> [1518606615.6564] device (wlp0s26u1u4): set-hw-addr: set MAC address to 76:60:91:4E:7D:41 (scanning)
Feb 14 06:10:15 anarchy NetworkManager[343]: <info> [1518606615.6759] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:10:15 anarchy NetworkManager[343]: <info> [1518606615.6914] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:10:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:15:31 anarchy NetworkManager[343]: <info> [1518606931.6471] device (wlp0s26u1u4): set-hw-addr: set MAC address to 1A:C5:28:77:EA:A5 (scanning)
Feb 14 06:15:31 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:15:31 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 1a:c5:28:77:ea:a5
Feb 14 06:15:31 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:15:31 anarchy NetworkManager[343]: <info> [1518606931.6652] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:15:31 anarchy NetworkManager[343]: <info> [1518606931.6828] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:20:47 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ea:7f:d2:39:c1:11
Feb 14 06:20:47 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:20:47 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:20:47 anarchy NetworkManager[343]: <info> [1518607247.7001] device (wlp0s26u1u4): set-hw-addr: set MAC address to EA:7F:D2:39:C1:11 (scanning)
Feb 14 06:20:47 anarchy NetworkManager[343]: <info> [1518607247.7189] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:20:47 anarchy NetworkManager[343]: <info> [1518607247.7393] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:26:03 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 3a:2f:91:b8:b3:eb
Feb 14 06:26:03 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:26:03 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:26:03 anarchy NetworkManager[343]: <info> [1518607563.7004] device (wlp0s26u1u4): set-hw-addr: set MAC address to 3A:2F:91:B8:B3:EB (scanning)
Feb 14 06:26:03 anarchy NetworkManager[343]: <info> [1518607563.7191] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:26:03 anarchy NetworkManager[343]: <info> [1518607563.7365] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:31:19 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 46:60:db:d3:74:0f
Feb 14 06:31:19 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:31:19 anarchy NetworkManager[343]: <info> [1518607879.7024] device (wlp0s26u1u4): set-hw-addr: set MAC address to 46:60:DB:D3:74:0F (scanning)
Feb 14 06:31:19 anarchy NetworkManager[343]: <info> [1518607879.7216] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:31:19 anarchy NetworkManager[343]: <info> [1518607879.7351] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:31:19 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:36:35 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: be:0b:fb:71:64:7d
Feb 14 06:36:35 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:36:35 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:36:35 anarchy NetworkManager[343]: <info> [1518608195.6546] device (wlp0s26u1u4): set-hw-addr: set MAC address to BE:0B:FB:71:64:7D (scanning)
Feb 14 06:36:35 anarchy NetworkManager[343]: <info> [1518608195.6731] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:36:35 anarchy NetworkManager[343]: <info> [1518608195.6871] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:41:51 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: a6:08:51:9a:d8:ad
Feb 14 06:41:51 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:41:51 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:41:51 anarchy NetworkManager[343]: <info> [1518608511.6249] device (wlp0s26u1u4): set-hw-addr: set MAC address to A6:08:51:9A:D8:AD (scanning)
Feb 14 06:41:51 anarchy NetworkManager[343]: <info> [1518608511.6423] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:41:51 anarchy NetworkManager[343]: <info> [1518608511.6581] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:47:07 anarchy NetworkManager[343]: <info> [1518608827.6178] device (wlp0s26u1u4): set-hw-addr: set MAC address to E2:73:5F:00:CC:FF (scanning)
Feb 14 06:47:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:47:07 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:47:07 anarchy NetworkManager[343]: <info> [1518608827.6359] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:47:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: e2:73:5f:00:cc:ff
Feb 14 06:47:07 anarchy NetworkManager[343]: <info> [1518608827.6552] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:52:12 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.845' (uid=1000 pid=32489 comm="gpk-application ")
Feb 14 06:52:12 anarchy systemd[1]: Starting PackageKit Daemon...
-- Subject: Unit packagekit.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit packagekit.service has begun starting up.
Feb 14 06:52:12 anarchy PackageKit[32500]: daemon start
Feb 14 06:52:12 anarchy dbus-daemon[339]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Feb 14 06:52:12 anarchy systemd[1]: Started PackageKit Daemon.
-- Subject: Unit packagekit.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit packagekit.service has finished starting up.
--
-- The start-up result is RESULT.
Feb 14 06:52:12 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Activating service name='ca.desrt.dconf' requested by ':1.63' (uid=1000 pid=32489 comm="gpk-application ")
Feb 14 06:52:12 anarchy PackageKit[32500]: get-repo-list transaction /1_ebedbadb from uid 1000 finished with success after 0ms
Feb 14 06:52:12 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Successfully activated service 'ca.desrt.dconf'
Feb 14 06:52:14 anarchy PackageKit[32500]: search-group transaction /2_aeabeded from uid 1000 finished with success after 247ms
Feb 14 06:52:21 anarchy PackageKit[32500]: search-group transaction /3_ccdbbdcb from uid 1000 finished with success after 7ms
Feb 14 06:52:23 anarchy PackageKit[32500]: search-group transaction /4_dbeadbbc from uid 1000 finished with success after 3ms
Feb 14 06:52:23 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 46:95:79:bf:f7:8b
Feb 14 06:52:23 anarchy NetworkManager[343]: <info> [1518609143.6257] device (wlp0s26u1u4): set-hw-addr: set MAC address to 46:95:79:BF:F7:8B (scanning)
Feb 14 06:52:23 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:52:23 anarchy NetworkManager[343]: <info> [1518609143.6437] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:52:23 anarchy NetworkManager[343]: <info> [1518609143.6595] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:52:23 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:52:32 anarchy PackageKit[32500]: search-group transaction /5_abaaecbd from uid 1000 finished with success after 4ms
Feb 14 06:52:43 anarchy PackageKit[32500]: search-name transaction /6_cdadbdad from uid 1000 finished with success after 9ms
Feb 14 06:52:51 anarchy PackageKit[32500]: search-name transaction /7_dabeeacb from uid 1000 finished with success after 5ms
Feb 14 06:52:53 anarchy PackageKit[32500]: get-details transaction /8_eedaccbe from uid 1000 finished with success after 0ms
Feb 14 06:53:00 anarchy PackageKit[32500]: new remove-packages transaction /9_aacddada scheduled from uid 1000
Feb 14 06:53:00 anarchy PackageKit[32500]: in /9_aacddada for remove-packages package wifi-radar;2.0.s10-1;any;installed was removing for uid 1000
Feb 14 06:53:00 anarchy PackageKit[32500]: remove-packages transaction /9_aacddada from uid 1000 finished with success after 27ms
Feb 14 06:53:00 anarchy PackageKit[32500]: get-details transaction /10_eeadbbbb from uid 1000 finished with success after 0ms
Feb 14 06:53:03 anarchy PackageKit[32500]: uid 1000 is trying to obtain org.freedesktop.packagekit.package-remove auth (only_trusted:0)
Feb 14 06:53:09 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mOperator of unix-session:c2 successfully authenticated as unix-user:woodani to gain TEMPORARY authorization for action org.freedesktop.packagekit.package-remove for system-bus-name::1.845 [gpk-application] (owned by unix-user:woodani)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: new remove-packages transaction /11_eeadaedc scheduled from uid 1000
Feb 14 06:53:09 anarchy PackageKit[32500]: uid 1000 obtained auth for org.freedesktop.packagekit.package-remove
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m0% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m5% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m11% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m16% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m22% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m27% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m33% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m38% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m44% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m50% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m55% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m61% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m66% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m72% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m77% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m83% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m88% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m94% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m100% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39mHook systemd-update.hook (Arming ConditionNeedsUpdate...) complete (1 of 2)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39mHook update-desktop-database.hook (Updating the desktop file MIME type cache...) complete (2 of 2)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: in /11_eeadaedc for remove-packages package wifi-radar;2.0.s10-1;any;installed was removing for uid 1000
Feb 14 06:53:09 anarchy PackageKit[32500]: remove-packages transaction /11_eeadaedc from uid 1000 finished with success after 111ms
Feb 14 06:53:09 anarchy PackageKit[32500]: search-name transaction /12_cdcdadec from uid 1000 finished with success after 11ms
Feb 14 06:53:26 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Activating via systemd: service name='org.freedesktop.Notifications' unit='xfce4-notifyd.service' requested by ':1.39' (uid=1000 pid=654 comm="nm-applet ")
Feb 14 06:53:26 anarchy systemd[537]: Starting XFCE notifications service...
-- Subject: Unit UNIT has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has begun starting up.
Feb 14 06:53:26 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Successfully activated service 'org.freedesktop.Notifications'
Feb 14 06:53:26 anarchy systemd[537]: Started XFCE notifications service.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is RESULT.
Feb 14 06:53:30 anarchy NetworkManager[343]: <info> [1518609210.8519] device (wlp0s26u1u4): Activation: starting connection 'dlink' (22a54532-4b29-49e5-9fc1-aadeac7026b0)
Feb 14 06:53:30 anarchy NetworkManager[343]: <info> [1518609210.8520] audit: op="connection-activate" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=654 uid=1000 result="success"
Feb 14 06:53:30 anarchy NetworkManager[343]: <info> [1518609210.8522] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0111] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 06:53:31 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0315] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0323] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0335] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0335] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0338] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0414] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0418] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0422] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist. No new secrets needed.
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0422] Config: added 'ssid' value 'dlink'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0422] Config: added 'scan_ssid' value '1'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0422] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0423] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0423] Config: added 'psk' value '<hidden>'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0511] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:53:31 anarchy NetworkManager[343]: <info> [1518609211.0670] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 06:53:32 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:32 anarchy NetworkManager[343]: <info> [1518609212.2657] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:32 anarchy NetworkManager[343]: <info> [1518609212.9077] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:33 anarchy NetworkManager[343]: <info> [1518609213.0078] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 06:53:34 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:34 anarchy NetworkManager[343]: <info> [1518609214.2015] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:34 anarchy NetworkManager[343]: <info> [1518609214.8437] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:35 anarchy NetworkManager[343]: <info> [1518609215.3445] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 06:53:36 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:36 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:36 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:36 anarchy NetworkManager[343]: <info> [1518609216.5457] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:36 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:36 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:37 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:37 anarchy NetworkManager[343]: <info> [1518609217.1867] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:38 anarchy NetworkManager[343]: <info> [1518609218.1879] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 06:53:39 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:39 anarchy NetworkManager[343]: <info> [1518609219.3778] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:40 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 06:53:40 anarchy NetworkManager[343]: <info> [1518609220.0121] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:45 anarchy NetworkManager[343]: <info> [1518609225.0169] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 06:53:50 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 06:53:50 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:50 anarchy NetworkManager[343]: <info> [1518609230.2001] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:50 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 06:53:50 anarchy NetworkManager[343]: <info> [1518609230.8430] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:56 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609236.4051] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 06:53:56 anarchy NetworkManager[343]: <info> [1518609236.4051] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 06:53:56 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609236.4063] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 06:53:56 anarchy NetworkManager[343]: <info> [1518609236.4068] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:56 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:53:56 anarchy NetworkManager[343]: <info> [1518609236.6306] device (wlp0s26u1u4): set-hw-addr: set MAC address to 42:EB:AA:D6:DC:74 (scanning)
Feb 14 06:53:56 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 42:eb:aa:d6:dc:74
Feb 14 06:53:56 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:53:56 anarchy NetworkManager[343]: <info> [1518609236.6511] device (wlp0s26u1u4): supplicant interface state: disconnected -> disabled
Feb 14 06:53:56 anarchy NetworkManager[343]: <info> [1518609236.6612] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:53:56 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:58:09 anarchy sudo[2603]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/pacman -S dhclient[0m
Feb 14 06:58:09 anarchy sudo[2603]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 06:58:37 anarchy sudo[2603]: pam_unix(sudo:session): session closed for user root
Feb 14 06:59:38 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 32:c4:8a:13:31:04
Feb 14 06:59:38 anarchy NetworkManager[343]: <info> [1518609578.6409] device (wlp0s26u1u4): set-hw-addr: set MAC address to 32:C4:8A:13:31:04 (scanning)
Feb 14 06:59:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:59:38 anarchy NetworkManager[343]: <info> [1518609578.6584] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:59:38 anarchy NetworkManager[343]: <info> [1518609578.6702] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:59:38 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:00:09 anarchy sudo[3382]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nano /etc/NetworkManager/conf.d/dhcp-client.conf[0m
Feb 14 07:00:09 anarchy sudo[3382]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:00:20 anarchy sudo[3382]: pam_unix(sudo:session): session closed for user root
Feb 14 07:00:42 anarchy sudo[3582]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nano /etc/NetworkManager/conf.d/dhcp-client.conf[0m
Feb 14 07:00:42 anarchy sudo[3582]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:01:02 anarchy sudo[3582]: pam_unix(sudo:session): session closed for user root
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.3308] device (wlp0s26u1u4): Activation: starting connection 'dlink' (22a54532-4b29-49e5-9fc1-aadeac7026b0)
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.3311] audit: op="connection-activate" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=654 uid=1000 result="success"
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.3313] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5243] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:01:13 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5428] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5436] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5447] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5448] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5450] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5518] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5522] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5527] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist. No new secrets needed.
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5527] Config: added 'ssid' value 'dlink'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5527] Config: added 'scan_ssid' value '1'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5527] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5527] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5528] Config: added 'psk' value '<hidden>'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5588] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:01:13 anarchy NetworkManager[343]: <info> [1518609673.5700] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:01:14 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:01:14 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:01:14 anarchy NetworkManager[343]: <info> [1518609674.7622] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:01:14 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:01:14 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:01:15 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:01:15 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:01:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:01:15 anarchy NetworkManager[343]: <info> [1518609675.4055] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:01:25 anarchy NetworkManager[343]: <info> [1518609685.4114] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:01:26 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:01:26 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:01:26 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:01:26 anarchy NetworkManager[343]: <info> [1518609686.6020] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:01:26 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:01:26 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:01:27 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:01:27 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:01:27 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:01:27 anarchy NetworkManager[343]: <info> [1518609687.2479] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:01:37 anarchy NetworkManager[343]: <info> [1518609697.2560] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:01:38 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609698.4056] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:01:38 anarchy NetworkManager[343]: <info> [1518609698.4057] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:01:38 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609698.4066] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:01:38 anarchy NetworkManager[343]: <info> [1518609698.4072] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:01:38 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: d6:f5:fd:34:e8:e3
Feb 14 07:01:38 anarchy NetworkManager[343]: <info> [1518609698.6291] device (wlp0s26u1u4): set-hw-addr: set MAC address to D6:F5:FD:34:E8:E3 (scanning)
Feb 14 07:01:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:01:38 anarchy NetworkManager[343]: <info> [1518609698.6499] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:01:38 anarchy NetworkManager[343]: <info> [1518609698.6588] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:01:38 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.0949] device (wlp0s26u1u4): Activation: starting connection 'dlink' (22a54532-4b29-49e5-9fc1-aadeac7026b0)
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.0952] audit: op="connection-activate" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=654 uid=1000 result="success"
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.0954] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2526] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:01:53 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2701] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2705] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2709] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2710] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2711] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2757] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2761] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2768] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist. No new secrets needed.
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2768] Config: added 'ssid' value 'dlink'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2769] Config: added 'scan_ssid' value '1'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2769] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2770] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2770] Config: added 'psk' value '<hidden>'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2834] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:01:53 anarchy NetworkManager[343]: <info> [1518609713.2982] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:01:54 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:01:54 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:01:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:01:54 anarchy NetworkManager[343]: <info> [1518609714.4911] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:01:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:01:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:01:55 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:01:55 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:01:55 anarchy NetworkManager[343]: <info> [1518609715.1318] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:02:05 anarchy NetworkManager[343]: <info> [1518609725.1378] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:02:06 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:02:06 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:02:06 anarchy NetworkManager[343]: <info> [1518609726.3302] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:02:06 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:02:06 anarchy NetworkManager[343]: <info> [1518609726.9708] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:02:16 anarchy NetworkManager[343]: <info> [1518609736.9786] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:02:18 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609738.4046] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:02:18 anarchy NetworkManager[343]: <info> [1518609738.4046] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:02:18 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609738.4054] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:02:18 anarchy NetworkManager[343]: <info> [1518609738.4060] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:02:18 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:02:18 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ba:5b:63:f4:2f:0f
Feb 14 07:02:18 anarchy NetworkManager[343]: <info> [1518609738.6156] device (wlp0s26u1u4): set-hw-addr: set MAC address to BA:5B:63:F4:2F:0F (scanning)
Feb 14 07:02:18 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:02:18 anarchy NetworkManager[343]: <info> [1518609738.6358] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:02:18 anarchy NetworkManager[343]: <info> [1518609738.6551] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:02:18 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:02:36 anarchy sudo[4279]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/pacman -S network-manager-applet[0m
Feb 14 07:02:36 anarchy sudo[4279]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:02:49 anarchy sudo[4279]: pam_unix(sudo:session): session closed for user root
Feb 14 07:03:28 anarchy sudo[4631]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli dev wifi connect dlink password mcsd3911[0m
Feb 14 07:03:28 anarchy sudo[4631]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.3662] keyfile: add connection in-memory (ffa993b9-5052-4c65-962c-f0873843b81a,"dlink 1")
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.3676] device (wlp0s26u1u4): Activation: starting connection 'dlink 1' (ffa993b9-5052-4c65-962c-f0873843b81a)
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.3772] settings-connection[0x558152c47e00,ffa993b9-5052-4c65-962c-f0873843b81a]: write: successfully commited (keyfile: update /etc/NetworkManager/system-connections/dlink 1 (ffa993b9-5052-4c65-962c-f0873843b81a,"dlink 1") and persist connection)
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.3773] audit: op="connection-add-activate" uuid="ffa993b9-5052-4c65-962c-f0873843b81a" name="dlink 1" pid=4632 uid=0 result="success"
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.3863] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.5802] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:03:28 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.5984] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.5987] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.5992] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink 1' has security, but secrets are required.
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.5992] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.5993] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6030] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6033] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6036] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink 1' has security, and secrets exist. No new secrets needed.
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6036] Config: added 'ssid' value 'dlink'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6037] Config: added 'scan_ssid' value '1'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6037] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6037] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6037] Config: added 'auth_alg' value 'OPEN'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6037] Config: added 'psk' value '<hidden>'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6108] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:03:28 anarchy NetworkManager[343]: <info> [1518609808.6252] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:03:29 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:03:29 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:03:29 anarchy NetworkManager[343]: <info> [1518609809.8179] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:03:29 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:03:30 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:03:30 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:03:30 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:03:30 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:03:30 anarchy NetworkManager[343]: <info> [1518609810.4600] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:03:40 anarchy NetworkManager[343]: <info> [1518609820.4608] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:03:41 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:03:41 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:03:41 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:03:41 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:03:41 anarchy NetworkManager[343]: <info> [1518609821.6579] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:03:41 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:03:42 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:03:42 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:03:42 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:03:42 anarchy NetworkManager[343]: <info> [1518609822.2991] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:03:52 anarchy NetworkManager[343]: <info> [1518609832.3021] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:03:53 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609833.4058] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:03:53 anarchy NetworkManager[343]: <info> [1518609833.4058] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:03:53 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609833.4068] device (wlp0s26u1u4): Activation: failed for connection 'dlink 1'[0m
Feb 14 07:03:53 anarchy sudo[4631]: pam_unix(sudo:session): session closed for user root
Feb 14 07:03:53 anarchy NetworkManager[343]: <info> [1518609833.4566] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:53 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:03:53 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 2e:44:2c:1d:2d:73
Feb 14 07:03:53 anarchy NetworkManager[343]: <info> [1518609833.6838] device (wlp0s26u1u4): set-hw-addr: set MAC address to 2E:44:2C:1D:2D:73 (scanning)
Feb 14 07:03:53 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:03:53 anarchy NetworkManager[343]: <info> [1518609833.7036] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:03:53 anarchy NetworkManager[343]: <info> [1518609833.7191] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:03:53 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.1520] device (wlp0s26u1u4): Activation: starting connection 'dlink' (22a54532-4b29-49e5-9fc1-aadeac7026b0)
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.1521] audit: op="connection-activate" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=654 uid=1000 result="success"
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.1523] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.2736] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:04:08 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.2939] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.2946] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.2956] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.2957] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.2960] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3027] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3031] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3036] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist. No new secrets needed.
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3036] Config: added 'ssid' value 'dlink'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3036] Config: added 'scan_ssid' value '1'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3036] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3036] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3036] Config: added 'psk' value '<hidden>'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3048] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:04:08 anarchy NetworkManager[343]: <info> [1518609848.3155] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:04:09 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:04:09 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:04:09 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:04:09 anarchy NetworkManager[343]: <info> [1518609849.5068] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:04:09 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:04:09 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:04:10 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:04:10 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:04:10 anarchy NetworkManager[343]: <info> [1518609850.1486] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:04:14 anarchy NetworkManager[343]: <info> [1518609854.8343] device (wlp0s26u1u4): state change: config -> deactivating (reason 'connection-removed', sys-iface-state: 'managed')
Feb 14 07:04:14 anarchy NetworkManager[343]: <info> [1518609854.8701] audit: op="connection-delete" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=4893 uid=1000 result="success"
Feb 14 07:04:14 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:14 anarchy NetworkManager[343]: <info> [1518609854.8710] device (wlp0s26u1u4): state change: deactivating -> disconnected (reason 'connection-removed', sys-iface-state: 'managed')
Feb 14 07:04:15 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 9a:b8:dc:3b:f5:c6
Feb 14 07:04:15 anarchy NetworkManager[343]: <info> [1518609855.0548] device (wlp0s26u1u4): set-hw-addr: set MAC address to 9A:B8:DC:3B:F5:C6 (scanning)
Feb 14 07:04:15 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:15 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.2' (uid=0 pid=343 comm="/usr/bin/NetworkManager --no-daemon ")
Feb 14 07:04:15 anarchy systemd[1]: Starting Network Manager Script Dispatcher Service...
-- Subject: Unit NetworkManager-dispatcher.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit NetworkManager-dispatcher.service has begun starting up.
Feb 14 07:04:15 anarchy NetworkManager[343]: <info> [1518609855.0760] device (wlp0s26u1u4): supplicant interface state: disconnected -> disabled
Feb 14 07:04:15 anarchy NetworkManager[343]: <info> [1518609855.0809] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:04:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:04:15 anarchy dbus-daemon[339]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Feb 14 07:04:15 anarchy systemd[1]: Started Network Manager Script Dispatcher Service.
-- Subject: Unit NetworkManager-dispatcher.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit NetworkManager-dispatcher.service has finished starting up.
--
-- The start-up result is RESULT.
Feb 14 07:04:15 anarchy nm-dispatcher[4921]: req:1 'down' [wlp0s26u1u4]: new request (0 scripts)
Feb 14 07:04:15 anarchy nm-dispatcher[4921]: req:1 'down' [wlp0s26u1u4]: completed: no scripts
Feb 14 07:04:18 anarchy NetworkManager[343]: <info> [1518609858.0039] audit: op="connection-delete" uuid="52e48116-835f-479f-b388-de6ea4f0ad25" name="MCSD20" pid=4893 uid=1000 result="success"
Feb 14 07:04:19 anarchy NetworkManager[343]: <info> [1518609859.8797] audit: op="connection-delete" uuid="ffa993b9-5052-4c65-962c-f0873843b81a" name="dlink 1" pid=4893 uid=1000 result="success"
Feb 14 07:04:26 anarchy sudo[5002]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli dev wifi connect dlink password mcsd3911[0m
Feb 14 07:04:26 anarchy sudo[5002]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:04:26 anarchy NetworkManager[343]: <info> [1518609866.9608] keyfile: add connection in-memory (a667c33b-3ff0-4796-a2da-fcee36b79e50,"dlink")
Feb 14 07:04:26 anarchy NetworkManager[343]: <info> [1518609866.9622] device (wlp0s26u1u4): Activation: starting connection 'dlink' (a667c33b-3ff0-4796-a2da-fcee36b79e50)
Feb 14 07:04:26 anarchy NetworkManager[343]: <info> [1518609866.9791] settings-connection[0x558152c47e00,a667c33b-3ff0-4796-a2da-fcee36b79e50]: write: successfully commited (keyfile: update /etc/NetworkManager/system-connections/dlink (a667c33b-3ff0-4796-a2da-fcee36b79e50,"dlink") and persist connection)
Feb 14 07:04:26 anarchy NetworkManager[343]: <info> [1518609866.9793] audit: op="connection-add-activate" uuid="a667c33b-3ff0-4796-a2da-fcee36b79e50" name="dlink" pid=5003 uid=0 result="success"
Feb 14 07:04:26 anarchy NetworkManager[343]: <info> [1518609866.9884] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1127] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:04:27 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1342] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1349] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1354] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1354] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1355] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1437] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1441] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1444] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1452] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist. No new secrets needed.
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1453] Config: added 'ssid' value 'dlink'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1454] Config: added 'scan_ssid' value '1'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1454] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1454] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1454] Config: added 'auth_alg' value 'OPEN'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1455] Config: added 'psk' value '<hidden>'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info> [1518609867.1573] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:04:28 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:04:28 anarchy NetworkManager[343]: <info> [1518609868.3561] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:04:28 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:04:29 anarchy NetworkManager[343]: <info> [1518609869.0048] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:04:39 anarchy NetworkManager[343]: <info> [1518609879.0142] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:04:40 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:04:40 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:04:40 anarchy NetworkManager[343]: <info> [1518609880.2101] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:04:40 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:04:40 anarchy NetworkManager[343]: <info> [1518609880.8517] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:04:50 anarchy NetworkManager[343]: <info> [1518609890.8535] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:04:52 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609892.4043] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:04:52 anarchy NetworkManager[343]: <info> [1518609892.4044] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:04:52 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518609892.4054] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:04:52 anarchy sudo[5002]: pam_unix(sudo:session): session closed for user root
Feb 14 07:04:52 anarchy NetworkManager[343]: <info> [1518609892.4470] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:52 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:52 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c6:5f:c8:0b:3e:25
Feb 14 07:04:52 anarchy NetworkManager[343]: <info> [1518609892.6677] device (wlp0s26u1u4): set-hw-addr: set MAC address to C6:5F:C8:0B:3E:25 (scanning)
Feb 14 07:04:52 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:52 anarchy NetworkManager[343]: <info> [1518609892.6864] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:04:52 anarchy NetworkManager[343]: <info> [1518609892.7034] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:04:52 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:08:43 anarchy sudo[6610]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli dev status[0m
Feb 14 07:08:43 anarchy sudo[6610]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:08:43 anarchy sudo[6610]: pam_unix(sudo:session): session closed for user root
Feb 14 07:09:02 anarchy sudo[6724]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli dev wifi list[0m
Feb 14 07:09:02 anarchy sudo[6724]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:09:02 anarchy sudo[6724]: pam_unix(sudo:session): session closed for user root
Feb 14 07:10:34 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 6e:f5:49:77:c7:12
Feb 14 07:10:34 anarchy NetworkManager[343]: <info> [1518610234.6505] device (wlp0s26u1u4): set-hw-addr: set MAC address to 6E:F5:49:77:C7:12 (scanning)
Feb 14 07:10:34 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:10:34 anarchy NetworkManager[343]: <info> [1518610234.6685] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:10:34 anarchy NetworkManager[343]: <info> [1518610234.6909] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:10:34 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:10:57 anarchy sudo[7425]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli con add con-name dlink_profile ifname wlp0s26u1u4 type wifi ssid dlink[0m
Feb 14 07:10:57 anarchy sudo[7425]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:10:57 anarchy NetworkManager[343]: <info> [1518610257.4844] keyfile: add connection /etc/NetworkManager/system-connections/dlink_profile (8e0c1cac-0879-4d82-a7cb-c470f3184bcb,"dlink_profile")
Feb 14 07:10:57 anarchy NetworkManager[343]: <info> [1518610257.4851] audit: op="connection-add" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" pid=7426 uid=0 result="success"
Feb 14 07:10:57 anarchy sudo[7425]: pam_unix(sudo:session): session closed for user root
Feb 14 07:11:42 anarchy sudo[7703]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli con modify dlink_profile wifi-sec.key-mgmt wpa-psk[0m
Feb 14 07:11:42 anarchy sudo[7703]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.0845] settings-connection[0x558152c47c40,8e0c1cac-0879-4d82-a7cb-c470f3184bcb]: write: successfully updated (keyfile: update /etc/NetworkManager/system-connections/dlink_profile (8e0c1cac-0879-4d82-a7cb-c470f3184bcb,"dlink_profile"))
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.0856] audit: op="connection-update" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" args="802-11-wireless-security.key-mgmt" pid=7704 uid=0 result="success"
Feb 14 07:11:42 anarchy sudo[7703]: pam_unix(sudo:session): session closed for user root
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.0906] policy: auto-activating connection 'dlink_profile'
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.0914] device (wlp0s26u1u4): Activation: starting connection 'dlink_profile' (8e0c1cac-0879-4d82-a7cb-c470f3184bcb)
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.0916] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:11:42 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.2677] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:11:42 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.2857] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.2863] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.2875] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink_profile' has security, but secrets are required.
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.2875] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.2878] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:11:42 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518610302.2961] device (wlp0s26u1u4): No agents were available for this request.[0m
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.3040] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:11:42 anarchy NetworkManager[343]: <info> [1518610302.3098] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:12:12 anarchy NetworkManager[343]: <info> [1518610332.4039] device (wlp0s26u1u4): state change: need-auth -> failed (reason 'no-secrets', sys-iface-state: 'managed')
Feb 14 07:12:12 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518610332.4047] device (wlp0s26u1u4): Activation: failed for connection 'dlink_profile'[0m
Feb 14 07:12:12 anarchy NetworkManager[343]: <info> [1518610332.4432] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:12:12 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 12:2d:58:f3:f0:7a
Feb 14 07:12:12 anarchy NetworkManager[343]: <info> [1518610332.6775] device (wlp0s26u1u4): set-hw-addr: set MAC address to 12:2D:58:F3:F0:7A (scanning)
Feb 14 07:12:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:12:12 anarchy NetworkManager[343]: <info> [1518610332.6967] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:12:12 anarchy NetworkManager[343]: <info> [1518610332.7162] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:12:12 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:12:24 anarchy sudo[7971]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli con modify dlink_profile wifi-sec.psk mcsd3911[0m
Feb 14 07:12:24 anarchy sudo[7971]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:12:24 anarchy NetworkManager[343]: <info> [1518610344.3695] settings-connection[0x558152c47c40,8e0c1cac-0879-4d82-a7cb-c470f3184bcb]: write: successfully updated (keyfile: update /etc/NetworkManager/system-connections/dlink_profile (8e0c1cac-0879-4d82-a7cb-c470f3184bcb,"dlink_profile"))
Feb 14 07:12:24 anarchy NetworkManager[343]: <info> [1518610344.3708] audit: op="connection-update" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" args="802-11-wireless-security.psk" pid=7972 uid=0 result="success"
Feb 14 07:12:24 anarchy sudo[7971]: pam_unix(sudo:session): session closed for user root
Feb 14 07:12:47 anarchy sudo[8205]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli connection up dlink_profile[0m
Feb 14 07:12:47 anarchy sudo[8205]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.2447] device (wlp0s26u1u4): Activation: starting connection 'dlink_profile' (8e0c1cac-0879-4d82-a7cb-c470f3184bcb)
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.2448] audit: op="connection-activate" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" pid=8206 uid=0 result="success"
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.2450] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4158] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:12:47 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4360] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4365] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4372] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink_profile' has security, but secrets are required.
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4374] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4376] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4484] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4486] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4489] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4499] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink_profile' has security, and secrets exist. No new secrets needed.
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4500] Config: added 'ssid' value 'dlink'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4500] Config: added 'scan_ssid' value '1'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4500] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4500] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4500] Config: added 'psk' value '<hidden>'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info> [1518610367.4505] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:12:48 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:12:48 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:12:48 anarchy NetworkManager[343]: <info> [1518610368.6504] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:12:48 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:12:48 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:12:49 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:12:49 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:12:49 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:12:49 anarchy NetworkManager[343]: <info> [1518610369.2905] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:12:59 anarchy NetworkManager[343]: <info> [1518610379.3002] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:13:00 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:13:00 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:13:00 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:13:00 anarchy NetworkManager[343]: <info> [1518610380.4901] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:13:00 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:13:00 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:13:00 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:13:01 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:13:01 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:13:01 anarchy NetworkManager[343]: <info> [1518610381.1311] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:13:11 anarchy NetworkManager[343]: <info> [1518610391.1321] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:13:12 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518610392.4041] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:13:12 anarchy NetworkManager[343]: <info> [1518610392.4041] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:13:12 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518610392.4049] device (wlp0s26u1u4): Activation: failed for connection 'dlink_profile'[0m
Feb 14 07:13:12 anarchy NetworkManager[343]: <info> [1518610392.4055] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:13:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:13:12 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 36:a2:89:57:0b:3a
Feb 14 07:13:12 anarchy NetworkManager[343]: <info> [1518610392.6441] device (wlp0s26u1u4): set-hw-addr: set MAC address to 36:A2:89:57:0B:3A (scanning)
Feb 14 07:13:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:13:12 anarchy sudo[8205]: pam_unix(sudo:session): session closed for user root
Feb 14 07:13:12 anarchy NetworkManager[343]: <info> [1518610392.6655] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:13:12 anarchy NetworkManager[343]: <info> [1518610392.6753] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:13:12 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:13:33 anarchy sudo[8498]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli -p c[0m
Feb 14 07:13:33 anarchy sudo[8498]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:15:47 anarchy sudo[8498]: pam_unix(sudo:session): session closed for user root
Feb 14 07:15:52 anarchy sudo[9342]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli connection up dlink[0m
Feb 14 07:15:52 anarchy sudo[9342]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.5735] device (wlp0s26u1u4): Activation: starting connection 'dlink' (a667c33b-3ff0-4796-a2da-fcee36b79e50)
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.5737] audit: op="connection-activate" uuid="a667c33b-3ff0-4796-a2da-fcee36b79e50" name="dlink" pid=9343 uid=0 result="success"
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.5739] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8140] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:15:52 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:15:52 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8317] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8323] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8335] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8335] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8336] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8413] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8422] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8430] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist. No new secrets needed.
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8431] Config: added 'ssid' value 'dlink'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8431] Config: added 'scan_ssid' value '1'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8431] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8431] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8431] Config: added 'auth_alg' value 'OPEN'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8432] Config: added 'psk' value '<hidden>'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8443] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:15:52 anarchy NetworkManager[343]: <info> [1518610552.8554] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:15:54 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:15:54 anarchy NetworkManager[343]: <info> [1518610554.0509] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:15:54 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:15:54 anarchy NetworkManager[343]: <info> [1518610554.6919] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:16:04 anarchy NetworkManager[343]: <info> [1518610564.6967] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:16:05 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:16:05 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:16:05 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:16:05 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:16:05 anarchy NetworkManager[343]: <info> [1518610565.8899] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:16:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:16:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:16:06 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:16:06 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:16:06 anarchy NetworkManager[343]: <info> [1518610566.5328] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:16:16 anarchy NetworkManager[343]: <info> [1518610576.5365] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:16:18 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518610578.4047] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:16:18 anarchy NetworkManager[343]: <info> [1518610578.4048] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:16:18 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518610578.4056] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:16:18 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:16:18 anarchy NetworkManager[343]: <info> [1518610578.4061] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:16:18 anarchy NetworkManager[343]: <info> [1518610578.6209] device (wlp0s26u1u4): set-hw-addr: set MAC address to 4E:32:7F:5E:BE:6A (scanning)
Feb 14 07:16:18 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 4e:32:7f:5e:be:6a
Feb 14 07:16:18 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:16:18 anarchy sudo[9342]: pam_unix(sudo:session): session closed for user root
Feb 14 07:16:18 anarchy NetworkManager[343]: <info> [1518610578.6432] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:16:18 anarchy NetworkManager[343]: <info> [1518610578.6510] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:16:18 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:21:59 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 06:4e:09:53:16:78
Feb 14 07:21:59 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:21:59 anarchy NetworkManager[343]: <info> [1518610919.6208] device (wlp0s26u1u4): set-hw-addr: set MAC address to 06:4E:09:53:16:78 (scanning)
Feb 14 07:21:59 anarchy NetworkManager[343]: <info> [1518610919.6389] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:21:59 anarchy NetworkManager[343]: <info> [1518610919.6589] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:21:59 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:27:15 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 1e:76:25:21:f2:5c
Feb 14 07:27:15 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:27:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:27:15 anarchy NetworkManager[343]: <info> [1518611235.6474] device (wlp0s26u1u4): set-hw-addr: set MAC address to 1E:76:25:21:F2:5C (scanning)
Feb 14 07:27:15 anarchy NetworkManager[343]: <info> [1518611235.6661] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:27:15 anarchy NetworkManager[343]: <info> [1518611235.6876] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:28:08 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mRegistered Authentication Agent for unix-process:13846:16516984 (system bus name :1.1029 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)[0m
Feb 14 07:28:13 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mOperator of unix-session:c2 successfully authenticated as unix-user:woodani to gain TEMPORARY authorization for action org.freedesktop.systemd1.manage-unit-files for system-bus-name::1.1030 [systemctl disable dhcpcd.service] (owned by unix-user:woodani)[0m
Feb 14 07:28:20 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mOperator of unix-session:c2 successfully authenticated as unix-user:woodani to gain TEMPORARY authorization for action org.freedesktop.systemd1.reload-daemon for system-bus-name::1.1030 [systemctl disable dhcpcd.service] (owned by unix-user:woodani)[0m
Feb 14 07:28:20 anarchy systemd[1]: Reloading.
Feb 14 07:28:20 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mUnregistered Authentication Agent for unix-process:13846:16516984 (system bus name :1.1029, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)[0m
Feb 14 07:28:58 anarchy NetworkManager[343]: <info> [1518611338.7667] audit: op="connection-delete" uuid="a667c33b-3ff0-4796-a2da-fcee36b79e50" name="dlink" pid=14129 uid=1000 result="success"
Feb 14 07:29:01 anarchy NetworkManager[343]: <info> [1518611341.9593] audit: op="connection-delete" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" pid=14129 uid=1000 result="success"
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.5871] keyfile: add connection in-memory (1e48ae96-9e86-415d-bd8f-e4833bf90049,"dlink")
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.5888] device (wlp0s26u1u4): Activation: starting connection 'dlink' (1e48ae96-9e86-415d-bd8f-e4833bf90049)
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.6094] settings-connection[0x558152c47b60,1e48ae96-9e86-415d-bd8f-e4833bf90049]: write: successfully commited (keyfile: update /etc/NetworkManager/system-connections/dlink (1e48ae96-9e86-415d-bd8f-e4833bf90049,"dlink") and persist connection)
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.6095] audit: op="connection-add-activate" uuid="1e48ae96-9e86-415d-bd8f-e4833bf90049" name="dlink" pid=654 uid=1000 result="success"
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.6175] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:29:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.8369] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:29:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.8551] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.8552] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.8555] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.8555] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.8556] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:29:07 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518611347.8626] device (wlp0s26u1u4): No agents were available for this request.[0m
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.8669] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:29:07 anarchy NetworkManager[343]: <info> [1518611347.8725] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:29:38 anarchy NetworkManager[343]: <info> [1518611378.4047] device (wlp0s26u1u4): state change: need-auth -> failed (reason 'no-secrets', sys-iface-state: 'managed')
Feb 14 07:29:38 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518611378.4055] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:29:38 anarchy NetworkManager[343]: <info> [1518611378.4366] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:29:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:29:38 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ce:1a:50:3e:0e:74
Feb 14 07:29:38 anarchy NetworkManager[343]: <info> [1518611378.6609] device (wlp0s26u1u4): set-hw-addr: set MAC address to CE:1A:50:3E:0E:74 (scanning)
Feb 14 07:29:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:29:38 anarchy NetworkManager[343]: <info> [1518611378.6828] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:29:38 anarchy NetworkManager[343]: <info> [1518611378.6908] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:29:38 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.0655] keyfile: add connection in-memory (8eee3a3f-4220-4125-b301-0968d98a9184,"dlink 1")
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.0672] device (wlp0s26u1u4): Activation: starting connection 'dlink 1' (8eee3a3f-4220-4125-b301-0968d98a9184)
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.0770] settings-connection[0x558152c47c40,8eee3a3f-4220-4125-b301-0968d98a9184]: write: successfully commited (keyfile: update /etc/NetworkManager/system-connections/dlink 1 (8eee3a3f-4220-4125-b301-0968d98a9184,"dlink 1") and persist connection)
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.0771] audit: op="connection-add-activate" uuid="8eee3a3f-4220-4125-b301-0968d98a9184" name="dlink 1" pid=14637 uid=1000 result="success"
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.0873] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2523] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:30:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2722] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2728] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2740] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink 1' has security, but secrets are required.
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2740] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2743] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2882] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2884] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2888] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2892] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink 1' has security, and secrets exist. No new secrets needed.
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2892] Config: added 'ssid' value 'dlink'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2892] Config: added 'scan_ssid' value '1'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2892] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2892] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2893] Config: added 'auth_alg' value 'OPEN'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.2893] Config: added 'psk' value '<hidden>'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info> [1518611412.3027] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:30:13 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:30:13 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:30:13 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:30:13 anarchy NetworkManager[343]: <info> [1518611413.4984] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:30:13 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:30:13 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:30:14 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:30:14 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:30:14 anarchy NetworkManager[343]: <info> [1518611414.1400] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:30:24 anarchy NetworkManager[343]: <info> [1518611424.1438] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:30:25 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:30:25 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:30:25 anarchy NetworkManager[343]: <info> [1518611425.3379] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:30:25 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:30:25 anarchy NetworkManager[343]: <info> [1518611425.9785] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:30:35 anarchy NetworkManager[343]: <info> [1518611435.9844] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:30:37 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518611437.4047] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:30:37 anarchy NetworkManager[343]: <info> [1518611437.4048] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:30:37 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn> [1518611437.4061] device (wlp0s26u1u4): Activation: failed for connection 'dlink 1'[0m
Feb 14 07:30:37 anarchy NetworkManager[343]: <info> [1518611437.4348] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:37 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:30:37 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 2e:8b:d1:7f:14:61
Feb 14 07:30:37 anarchy NetworkManager[343]: <info> [1518611437.6614] device (wlp0s26u1u4): set-hw-addr: set MAC address to 2E:8B:D1:7F:14:61 (scanning)
Feb 14 07:30:37 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:30:37 anarchy NetworkManager[343]: <info> [1518611437.6799] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:30:37 anarchy NetworkManager[343]: <info> [1518611437.6922] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:30:37 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:33:05 anarchy NetworkManager[343]: <info> [1518611585.2993] audit: op="connection-delete" uuid="8eee3a3f-4220-4125-b301-0968d98a9184" name="dlink 1" pid=14129 uid=1000 result="success"
Feb 14 07:33:07 anarchy NetworkManager[343]: <info> [1518611587.9424] audit: op="connection-delete" uuid="1e48ae96-9e86-415d-bd8f-e4833bf90049" name="dlink" pid=14129 uid=1000 result="success"
Feb 14 07:36:19 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ba:11:6c:8e:15:42
Feb 14 07:36:19 anarchy NetworkManager[343]: <info> [1518611779.6911] device (wlp0s26u1u4): set-hw-addr: set MAC address to BA:11:6C:8E:15:42 (scanning)
Feb 14 07:36:19 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:36:19 anarchy NetworkManager[343]: <info> [1518611779.7119] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:36:19 anarchy NetworkManager[343]: <info> [1518611779.7272] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:36:19 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:41:35 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: e6:0f:81:5d:b5:0b
Feb 14 07:41:35 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:41:35 anarchy NetworkManager[343]: <info> [1518612095.6465] device (wlp0s26u1u4): set-hw-addr: set MAC address to E6:0F:81:5D:B5:0B (scanning)
Feb 14 07:41:35 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:41:35 anarchy NetworkManager[343]: <info> [1518612095.6647] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:41:35 anarchy NetworkManager[343]: <info> [1518612095.6768] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:46:51 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 3a:16:ae:1e:06:37
Feb 14 07:46:51 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:46:51 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:46:51 anarchy NetworkManager[343]: <info> [1518612411.6285] device (wlp0s26u1u4): set-hw-addr: set MAC address to 3A:16:AE:1E:06:37 (scanning)
Feb 14 07:46:51 anarchy NetworkManager[343]: <info> [1518612411.6471] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:46:51 anarchy NetworkManager[343]: <info> [1518612411.6642] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:52:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: e6:e2:c8:72:62:51
Feb 14 07:52:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:52:07 anarchy NetworkManager[343]: <info> [1518612727.6161] device (wlp0s26u1u4): set-hw-addr: set MAC address to E6:E2:C8:72:62:51 (scanning)
Feb 14 07:52:07 anarchy NetworkManager[343]: <info> [1518612727.6340] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:52:07 anarchy NetworkManager[343]: <info> [1518612727.6549] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:52:07 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:57:23 anarchy NetworkManager[343]: <info> [1518613043.6344] device (wlp0s26u1u4): set-hw-addr: set MAC address to C2:31:1B:31:64:9D (scanning)
Feb 14 07:57:23 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:57:23 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:57:23 anarchy NetworkManager[343]: <info> [1518613043.6536] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:57:23 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c2:31:1b:31:64:9d
Feb 14 07:57:23 anarchy NetworkManager[343]: <info> [1518613043.6703] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:02:39 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: da:90:d6:cf:c5:92
Feb 14 08:02:39 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:02:39 anarchy NetworkManager[343]: <info> [1518613359.6289] device (wlp0s26u1u4): set-hw-addr: set MAC address to DA:90:D6:CF:C5:92 (scanning)
Feb 14 08:02:39 anarchy NetworkManager[343]: <info> [1518613359.6497] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:02:39 anarchy NetworkManager[343]: <info> [1518613359.6618] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:02:39 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:07:55 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ea:9e:72:d6:06:3d
Feb 14 08:07:55 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:07:55 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:07:55 anarchy NetworkManager[343]: <info> [1518613675.6867] device (wlp0s26u1u4): set-hw-addr: set MAC address to EA:9E:72:D6:06:3D (scanning)
Feb 14 08:07:55 anarchy NetworkManager[343]: <info> [1518613675.7051] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:07:55 anarchy NetworkManager[343]: <info> [1518613675.7231] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:08:56 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.1189' (uid=1000 pid=15937 comm="/usr/lib/libreoffice/program/soffice.bin --writer ")
Feb 14 08:08:56 anarchy systemd[1]: Starting Hostname Service...
-- Subject: Unit systemd-hostnamed.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-hostnamed.service has begun starting up.
Feb 14 08:08:56 anarchy dbus-daemon[339]: [system] Successfully activated service 'org.freedesktop.hostname1'
Feb 14 08:08:56 anarchy systemd[1]: Started Hostname Service.
-- Subject: Unit systemd-hostnamed.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-hostnamed.service has finished starting up.
--
-- The start-up result is RESULT.
Feb 14 08:08:57 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:08:57 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service' requested by ':1.1194' (uid=1000 pid=29000 comm="/usr/lib/gvfs/gvfsd-dnssd --spawner :1.13 /org/gtk")
Feb 14 08:09:12 anarchy dbus-daemon[339]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service not found.
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:22 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:13:04 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.1207' (uid=1000 pid=2207 comm="xfce4-terminal --drop-down ")
Feb 14 08:13:04 anarchy systemd[1]: Starting Hostname Service...
-- Subject: Unit systemd-hostnamed.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-hostnamed.service has begun starting up.
Feb 14 08:13:04 anarchy dbus-daemon[339]: [system] Successfully activated service 'org.freedesktop.hostname1'
Feb 14 08:13:04 anarchy systemd[1]: Started Hostname Service.
-- Subject: Unit systemd-hostnamed.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-hostnamed.service has finished starting up.
--
-- The start-up result is RESULT.
Feb 14 08:13:11 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ee:90:0c:fb:47:82
Feb 14 08:13:11 anarchy NetworkManager[343]: <info> [1518613991.6382] device (wlp0s26u1u4): set-hw-addr: set MAC address to EE:90:0C:FB:47:82 (scanning)
Feb 14 08:13:11 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:13:11 anarchy NetworkManager[343]: <info> [1518613991.6583] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:13:11 anarchy NetworkManager[343]: <info> [1518613991.6794] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:13:11 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:13:34 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Activating service name='org.freedesktop.thumbnails.Cache1' requested by ':1.7' (uid=1000 pid=578 comm="Thunar --sm-client-id 2fccab312-0118-4032-8d85-48b")
Feb 14 08:13:34 anarchy tumblerd[30625]: [0;1;39m[0;1;31m[0;1;39mFailed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory[0m
Feb 14 08:13:34 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Successfully activated service 'org.freedesktop.thumbnails.Cache1'
Feb 14 08:13:34 anarchy tumblerd[30625]: [0;1;39m[0;1;31m[0;1;39mFailed to load plugin "tumbler-odf-thumbnailer.so": libgsf-1.so.114: cannot open shared object file: No such file or directory[0m
Feb 14 08:13:34 anarchy org.freedesktop.thumbnails.Cache1[552]: Registered thumbailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o
Feb 14 08:13:34 anarchy tumblerd[30625]: [0;1;39m[0;1;31m[0;1;39mFailed to load plugin "tumbler-poppler-thumbnailer.so": libpoppler-glib.so.8: cannot open shared object file: No such file or directory[0m
Feb 14 08:13:34 anarchy tumblerd[30625]: [0;1;39m[0;1;31m[0;1;39mFailed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.7: cannot open shared object file: No such file or directory[0m
Feb 14 08:18:27 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 6e:10:b8:0a:09:82
Feb 14 08:18:27 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:18:27 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:18:27 anarchy NetworkManager[343]: <info> [1518614307.6699] device (wlp0s26u1u4): set-hw-addr: set MAC address to 6E:10:B8:0A:09:82 (scanning)
Feb 14 08:18:27 anarchy NetworkManager[343]: <info> [1518614307.6880] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:18:27 anarchy NetworkManager[343]: <info> [1518614307.7011] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:23:43 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: e6:9e:ea:02:52:cc
Feb 14 08:23:43 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:23:43 anarchy NetworkManager[343]: <info> [1518614623.6497] device (wlp0s26u1u4): set-hw-addr: set MAC address to E6:9E:EA:02:52:CC (scanning)
Feb 14 08:23:43 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:23:43 anarchy NetworkManager[343]: <info> [1518614623.6677] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:23:43 anarchy NetworkManager[343]: <info> [1518614623.6868] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:27:01 anarchy sudo[3205]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/journalctl -xe[0m
Feb 14 08:27:01 anarchy sudo[3205]: pam_unix(sudo:session): session opened for user root by (uid=0) My access point is using WPA2 encryption I belive, and it is not a hidden network.
I’m trying to connect to an already known network via console (to later put this into a script). The most promising command so far seemed to be this one:
nmcli con up "Weelaan" ifname wlp4s0
That at least turns my WLAN tray icon into a loading animation and it looks like it’s trying to connect to the right network, but after a wile I get error notifications and this output:
Error: Connection activation failed: The Wi-Fi network could not be found
Hint: use 'journalctl -xe NM_CONNECTION=eef66f76-9566-4e3c-889c-9634960dd1b7 + NM_DEVICE=wlp4s0' to get more details.
Running that hinted command gives this output for the corresponding time:
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9017] device (wlp4s0): Activation: starting connection 'Weelaan' (eef66f76-9566-4e3c-889c-9634960dd1b7)
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9021] device (wlp4s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9049] device (wlp4s0): set-hw-addr: reset MAC address to 28:C6:3F:B1:EA:27 (preserve)
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9095] device (wlp4s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9100] device (wlp4s0): Activation: (wifi) access point 'Weelaan' has security, but secrets are required.
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9101] device (wlp4s0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9122] device (wlp4s0): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9127] device (wlp4s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9129] device (wlp4s0): Activation: (wifi) connection 'Weelaan' has security, and secrets exist. No new secrets needed.
Jul 26 10:21:24 manjaro NetworkManager[623]: <info> [1627287684.9435] device (wlp4s0): supplicant interface state: disconnected -> scanning
Jul 26 10:21:49 manjaro NetworkManager[623]: <warn> [1627287709.9959] device (wlp4s0): Activation: (wifi) association took too long, failing activation
Jul 26 10:21:49 manjaro NetworkManager[623]: <info> [1627287709.9959] device (wlp4s0): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Jul 26 10:21:49 manjaro NetworkManager[623]: <info> [1627287709.9983] device (wlp4s0): set-hw-addr: set MAC address to 26:28:CC:D2:10:A4 (scanning)
Jul 26 10:21:50 manjaro NetworkManager[623]: <warn> [1627287710.0022] device (wlp4s0): Activation: failed for connection 'Weelaan'
Jul 26 10:21:50 manjaro NetworkManager[623]: <info> [1627287710.0024] device (wlp4s0): supplicant interface state: scanning -> disconnected
Jul 26 10:21:50 manjaro NetworkManager[623]: <info> [1627287710.0043] device (wlp4s0): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Simply clicking the network tray icon and then the «connect» button on the network works, but I don’t want to take over the mouse in that script. That would also make it dependant on screen resolution and would have many other undesirable side effects. So what is nmcli‘s issue and how do I resolve this? What does it even do differently from KDE’s network menu?
Я запускаю устройство без головы, которое я хочу подключиться к Wi-Fi (он в настоящее время находится в сети), поэтому я использую nmcli. Я просматриваю соединения со следующими:
sudo nmcli dev wifi rescan
sudo nmcli dev wifi list
и сеть WiFi, которую я хочу, имеет силу 95%. Таким образом, я связываюсь с:
sudo nmcli dev wifi connect "SSID" password "wifipassword"
, и я получаю следующую ошибку:
Error: Connection activation failed: (53) The Wi-Fi network could not be found.
, и я попытался скопировать и вставить из list, чтобы я не сделал mistype SSID, и он все еще не работает. Он отлично работает с другими устройствами, использующими Ubuntu и сетевым менеджером, поэтому я знаю, что это не маршрутизатор.
Как он не может найти сеть, когда я подключаюсь, но обнаруживаю, что это нормально при сканировании и как это исправить?
задан
27 April 2018 в 04:06
поделиться
3 ответа
я не нашел Исправление для проблемы, но я думаю, я нашел проблему. Я использовал виртуальный интерфейс сделан с
[Ф1]
, чтобы организовать сеть WiFi, но [F2] и [Ф3] имел такой же MAC-адрес. Из-за проблем с RPi3 драйверов, я не могу изменить MAC-адрес(я пробовал [Ф4]), но если я понял, как, я уверен, вопрос был бы уже решен.
ответ дан NerdOfLinux
8 June 2018 в 14:45
поделиться
Я не нашел исправления для проблемы, но я считаю, что нашел проблему. Я использовал виртуальный интерфейс, сделанный с
sudo iw dev wlan0 interface add ap0 type __ap
, для размещения сети WiFi, но ap0 и wlan0 имели тот же MAC-адрес. Из-за проблемы с драйверами RPi3 я не мог изменить MAC-адрес (я попробовал macchanged -e ap0), но если бы я понял, как это сделать, я уверен, что проблема была бы решена.
ответ дан NerdOfLinux
17 July 2018 в 16:05
поделиться
Я не нашел исправления для проблемы, но я считаю, что нашел проблему. Я использовал виртуальный интерфейс, сделанный с
sudo iw dev wlan0 interface add ap0 type __ap
, для размещения сети WiFi, но ap0 и wlan0 имели тот же MAC-адрес. Из-за проблемы с драйверами RPi3 я не мог изменить MAC-адрес (я попробовал macchanged -e ap0), но если бы я понял, как это сделать, я уверен, что проблема была бы решена.
ответ дан NerdOfLinux
23 July 2018 в 16:59
поделиться
Другие вопросы по тегам:
Похожие вопросы:
Today after reading this post I started playing around with Network Manager. I tried to connect to my phones hotspot, I used the following commands:
Code: Select all
nmcli d wifi list
nmcli d wifi connect <myhotspot> password <mypassword>
and I got the following error message:
Code: Select all
Error: Connection activation failed: (53) The Wi-Fi network could not be found.
After seeing that error I googled it and tried what the top answer to this post said. And it still didn’t work (same error).
Following that, I tried connecting to my home wifi (same commands, different credentials) and it worked.
But then I saw that my home router uses WPA2-Personal however, my phone uses WPA2/WPA3-Personal. So I deleted the network
Code: Select all
nmcli connection delete <myhotspot>
and changed my hotspot to WPA2-Personal, and used the same commands and this time it worked.
Tried the same thing but used WPA3-Personal and it didn’t connect.
So my question is, how can I connect to WPA3 (and WPA2/WPA3), am I missing a switch in my commands or do I need to change some settings?