Содержание
- Error 23 in hd129 during readlba
- Who is online
- Data Recovery from SATA HD
- Error 23 in hd129 during readlba
- Who is online
Error 23 in hd129 during readlba
My WD400 Western Digital HDD is damage and I need help to recover important data. This is what happened:
I was using the PC when it freezed so I had to Swith it OFF. When I turned it back ON, it boots no more saying «insert system disk. «. I went to the BIOS and HDD is still recognised, so I put it to another working PC as a secondary master, went to BIOS of the other PC and the HDD is recognised as secondary master and it also recognised by windows as a new HDD. However, I can’t see it listed on «My Computer».
I ran «disk management» utility and it only listed my primary hdd. I confirmed that my WD400 is listed in the «Device Manager» as «WDC «WD400EB 00CPF0», why it is not listed in disk management?
Thanks in advance,
Joined: December 27th, 2006, 10:15
Posts: 1855
Location: Belgium
It is not listed because probably the boot record somehow got corrupted.
In order to get your data back, you can try to edit the boot sector manually (very difficult and only for experienced people) or you can use some of the commercially available programs to recovers files from a lost partition.
Mostly you can download a demo-version so you can verify if it can find your data back.
I would recommend this option.
It is also possible your harddisk developped bad sectors, and in that case you better contact a datarecovery company.
_________________
Murphy was an optimist
Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
 |
Joined: August 15th, 2006, 3:01
Posts: 3346
Location: CDRLabs @ Chandigarh [ India ]
Joined: December 27th, 2006, 10:15
Posts: 1855
Location: Belgium
Correct Amarbir, I overlooked that.
I cannot think what could cause this, except perhaps SA problem.
_________________
Murphy was an optimist
Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Joined: August 31st, 2006, 17:53
Posts: 356
Location: Birmingham, Al
Joined: November 29th, 2006, 10:08
Posts: 7833
Location: UK
Or is sector 0 is bad, this can occur.
Download a demo of something like «GetDataBack», see if that can see it.
_________________
PC Image Data Recovery
http://www.pcimage.co.uk
New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Joined: July 23rd, 2007, 3:05
Posts: 16
How can I check the partition table if the disk is not listed in the disk management utility? It is something very strange and it’s one of a kind problem I encountered. Normally, if BIOS recognised the disk it should be listed in the disk management but not in this case. I’m a bit convince with pcimage comment about damaged track 0, I will try «GetDataBack» and let you guys know the result.
Thanks for all your inputs.
Joined: August 31st, 2006, 17:53
Posts: 356
Location: Birmingham, Al
|
Joined: August 15th, 2006, 3:01
Posts: 3346
Location: CDRLabs @ Chandigarh [ India ]
Joined: July 23rd, 2007, 3:05
Posts: 16
You are right Amarbir, it should show in Disk Management. that’s why i said it is one of a kind problem that I encountered. I have tried it on 3 different machines but all of them detects it in BIOS and listed in Device Manager but not in Disk Management.
Strange isn’t it?
Joined: July 23rd, 2007, 3:05
Posts: 16
I tried GetDataBack, it reported an error on Track 0 and didn’t identified any file. Any other suggestions?
 |
Joined: June 27th, 2005, 8:27
Posts: 616
Location: India
get data back has a opetion of partial scan. run from some sector 10000 and see if it scans this hard disk.
Joined: July 23rd, 2007, 3:05
Posts: 16
This is what I get when on partial scan:
«I/O Error Unknown error (27) reading sector 10000 on HD 129: Do you want to continue?»
If I continue, it says this message on each sectors:
«Error 27 in HD129. During ReadLba: LAB= CHS=-lx-lx-l, Cnt=64»
Does it mean that all sectors are damage?
Joined: August 31st, 2006, 17:53
Posts: 356
Location: Birmingham, Al
Joined: July 23rd, 2007, 3:05
Posts: 16
MHDD can’t recognize the drive parameters and end-up with «Drive is not ready» error.
Joined: August 31st, 2006, 17:53
Posts: 356
Location: Birmingham, Al
Joined: July 23rd, 2007, 3:05
Posts: 16
Yes, the Jumper is on PM2 and detected as Secondary Master in the BIOS.
Joined: November 29th, 2006, 10:08
Posts: 7833
Location: UK
Hmm, could be that the translator and/or P-List is unreadable/corrupt.
I wouldn’t really recommend you buggering around with that, unless you havethe right tools and knowledge.
Where are you based?
_________________
PC Image Data Recovery
http://www.pcimage.co.uk
New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Joined: July 23rd, 2007, 3:05
Posts: 16
Joined: October 7th, 2005, 2:03
Posts: 154
Location: serbia
 |
| Page 1 of 2 | [ 23 posts ] | Go to page 1 , 2 Next |
All times are UTC — 5 hours [ DST ]
Who is online
Users browsing this forum: Google [Bot] , spin333 and 83 guests
Источник
Data Recovery from SATA HD
I have looked around here and tried just about everything in the list from CrazyOne with no luck yet.
The other day my computer, Win XP, rebooted on its own and when it came up, my Data drive (Maxtor 160GB SATA) had about 25% of its files missing. The capacity is correct, the only thing missing are the files. The files that happen to be gone are pictures from Holidays/Vacations etc, so the wife is VERY upset.
I know the name of the directory of the files that are gone, and I can even get to the directories from a cmd prompt, but they show as empty. Some of the missing files/directories will let me copy files from them to my other drive if I type in the name exactly. The ones I cant get give an error message about the file/directory being «corrupt and unreadable. Please run the ChkDsk utility.» I did run it and it errors out on step one after finding MANY errors. If I try and copy files directly because I know the name, I get CRC errors. — This is all from the CMD prompt, with it not listing any files.
I then tried Disk Commander 2003, which when I boot to the ERD, it scans up to about 75% very quickly then crashes on «Reading Master File Table». I then tried GetDataBack for NTFS which gets to about the same spot and then gives «Error 23 in HD129: during ReadLba». I also tried PC Inspector, File Scavenger, and a few others I cant remember with similar results.
When I do get a read error from within Windows, the Drive just dissappears until I reboot. For the scans to do complete with the errors the files are are listed but since the drive is no longer there, I cant recover it.
I downloaded the PowerMax utility from Maxtor to check the drive for errors, but it doesnt detect a either of my SATA drives.
Источник
Error 23 in hd129 during readlba
My WD400 Western Digital HDD is damage and I need help to recover important data. This is what happened:
I was using the PC when it freezed so I had to Swith it OFF. When I turned it back ON, it boots no more saying «insert system disk. «. I went to the BIOS and HDD is still recognised, so I put it to another working PC as a secondary master, went to BIOS of the other PC and the HDD is recognised as secondary master and it also recognised by windows as a new HDD. However, I can’t see it listed on «My Computer».
I ran «disk management» utility and it only listed my primary hdd. I confirmed that my WD400 is listed in the «Device Manager» as «WDC «WD400EB 00CPF0», why it is not listed in disk management?
Thanks in advance,
Joined: December 27th, 2006, 10:15
Posts: 1855
Location: Belgium
It is not listed because probably the boot record somehow got corrupted.
In order to get your data back, you can try to edit the boot sector manually (very difficult and only for experienced people) or you can use some of the commercially available programs to recovers files from a lost partition.
Mostly you can download a demo-version so you can verify if it can find your data back.
I would recommend this option.
It is also possible your harddisk developped bad sectors, and in that case you better contact a datarecovery company.
_________________
Murphy was an optimist
Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
|
Joined: August 15th, 2006, 3:01
Posts: 3346
Location: CDRLabs @ Chandigarh [ India ]
Joined: December 27th, 2006, 10:15
Posts: 1855
Location: Belgium
Correct Amarbir, I overlooked that.
I cannot think what could cause this, except perhaps SA problem.
_________________
Murphy was an optimist
Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Joined: August 31st, 2006, 17:53
Posts: 356
Location: Birmingham, Al
Joined: November 29th, 2006, 10:08
Posts: 7833
Location: UK
Or is sector 0 is bad, this can occur.
Download a demo of something like «GetDataBack», see if that can see it.
_________________
PC Image Data Recovery
http://www.pcimage.co.uk
New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Joined: July 23rd, 2007, 3:05
Posts: 16
How can I check the partition table if the disk is not listed in the disk management utility? It is something very strange and it’s one of a kind problem I encountered. Normally, if BIOS recognised the disk it should be listed in the disk management but not in this case. I’m a bit convince with pcimage comment about damaged track 0, I will try «GetDataBack» and let you guys know the result.
Thanks for all your inputs.
Joined: August 31st, 2006, 17:53
Posts: 356
Location: Birmingham, Al
|
Joined: August 15th, 2006, 3:01
Posts: 3346
Location: CDRLabs @ Chandigarh [ India ]
Joined: July 23rd, 2007, 3:05
Posts: 16
You are right Amarbir, it should show in Disk Management. that’s why i said it is one of a kind problem that I encountered. I have tried it on 3 different machines but all of them detects it in BIOS and listed in Device Manager but not in Disk Management.
Strange isn’t it?
Joined: July 23rd, 2007, 3:05
Posts: 16
I tried GetDataBack, it reported an error on Track 0 and didn’t identified any file. Any other suggestions?
|
Joined: June 27th, 2005, 8:27
Posts: 616
Location: India
get data back has a opetion of partial scan. run from some sector 10000 and see if it scans this hard disk.
Joined: July 23rd, 2007, 3:05
Posts: 16
This is what I get when on partial scan:
«I/O Error Unknown error (27) reading sector 10000 on HD 129: Do you want to continue?»
If I continue, it says this message on each sectors:
«Error 27 in HD129. During ReadLba: LAB= CHS=-lx-lx-l, Cnt=64»
Does it mean that all sectors are damage?
Joined: August 31st, 2006, 17:53
Posts: 356
Location: Birmingham, Al
Joined: July 23rd, 2007, 3:05
Posts: 16
MHDD can’t recognize the drive parameters and end-up with «Drive is not ready» error.
Joined: August 31st, 2006, 17:53
Posts: 356
Location: Birmingham, Al
Joined: July 23rd, 2007, 3:05
Posts: 16
Yes, the Jumper is on PM2 and detected as Secondary Master in the BIOS.
Joined: November 29th, 2006, 10:08
Posts: 7833
Location: UK
Hmm, could be that the translator and/or P-List is unreadable/corrupt.
I wouldn’t really recommend you buggering around with that, unless you havethe right tools and knowledge.
Where are you based?
_________________
PC Image Data Recovery
http://www.pcimage.co.uk
New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Joined: July 23rd, 2007, 3:05
Posts: 16
Joined: October 7th, 2005, 2:03
Posts: 154
Location: serbia
|
| Page 1 of 2 | [ 23 posts ] | Go to page 1 , 2 Next |
All times are UTC — 5 hours [ DST ]
Who is online
Users browsing this forum: Google [Bot] , spin333 and 83 guests
Источник
I have looked around here and tried just about everything in the list from CrazyOne with no luck yet.
The other day my computer, Win XP, rebooted on its own and when it came up, my Data drive (Maxtor 160GB SATA) had about 25% of its files missing. The capacity is correct, the only thing missing are the files. The files that happen to be gone are pictures from Holidays/Vacations etc, so the wife is VERY upset.
I know the name of the directory of the files that are gone, and I can even get to the directories from a cmd prompt, but they show as empty. Some of the missing files/directories will let me copy files from them to my other drive if I type in the name exactly. The ones I cant get give an error message about the file/directory being «corrupt and unreadable. Please run the ChkDsk utility.» I did run it and it errors out on step one after finding MANY errors. If I try and copy files directly because I know the name, I get CRC errors. — This is all from the CMD prompt, with it not listing any files.
I then tried Disk Commander 2003, which when I boot to the ERD, it scans up to about 75% very quickly then crashes on «Reading Master File Table». I then tried GetDataBack for NTFS which gets to about the same spot and then gives «Error 23 in HD129: during ReadLba». I also tried PC Inspector, File Scavenger, and a few others I cant remember with similar results.
When I do get a read error from within Windows, the Drive just dissappears until I reboot. For the scans to do complete with the errors the files are are listed but since the drive is no longer there, I cant recover it.
I downloaded the PowerMax utility from Maxtor to check the drive for errors, but it doesnt detect a either of my SATA drives.
I hope this makes sence.
Thanks for the help
Салон каждого транспортного средства оснащён магнитолами. Сам автомобилист заинтересован в том, чтобы автомагнитола не только присутствовала, но и всегда находилась в рабочем состоянии. Как же огорчаются автомобилисты, однажды сталкиваясь с проблемой, когда магнитола Пионер больше не читает флешку. Согласиться с этим и ездить в абсолютной тишине водители не желают, поэтому стремятся разобраться, что собой представляет ошибка 23 на магнитоле Пионер, флешка при её возникновении отказывается воспроизводить музыкальные файлы.
При использовании флешки на магнитоле Пионер может возникать ошибка 23.
Музыкальное сопровождение повышает уровень комфорта при передвижении. Поездка становится увлекательной и незаметной. Водители могут не только слушать свои любимые мелодии, но и получать полезные порции новостной информации. Современные магнитолы могут воспроизводить музыкальные файлы с оптического диска или с флешки. Благодаря этому автомобилисты могут самостоятельно формировать для себя музыкальные альбомы, а также их менять по мере возникновения у себя такого желания.
Причины и пути устранения ошибки
Причин, по которым магнитола может умолкнуть, существует великое множество. Конечно, если это механические повреждения, выход со строя аппаратной части, устранить проблему собственными силами не каждому удаётся. В этих ситуациях приходится обращаться за помощью в сервисные центры.
Вместе с этим могут возникать и такие варианты проблем, которые легко могут быть устранены, если только предварительно изучить массу полезных источников информации. Прежде всего, очень важно прочитать все рекомендации, которые содержатся в инструкции по эксплуатации звуковоспроизводящего устройства.
Самой распространённой проблемой, по причине которой музыка не воспроизводится, является «Ошибка 23» на магнитоле Пионер, флешка при этом не читается. Что же делать в такой ситуации, как предупредить возникновение в дальнейшем такой проблемы, важно разобраться сразу.
Причины
Флешка может перестать слушаться и читаться, если на неё проникнут «незваные гости». Чтобы выявить их и впоследствии с ними распрощаться, пользователи рекомендуют вставить съёмный накопитель в USB-разъём компьютера. После этого флешка обязательно отобразится, как съёмный диск, и её будет можно просканировать антивирусной программой. Если ваш антивирусник крайне редко обновляется, он может не справиться с устранением всех вирусов. В этом случае полезно предварительно обновить антивирусные базы, только после этого сканировать съёмный носитель. Можно воспользоваться онлайн-ресурсами антивирусных программ.
ВНИМАНИЕ. Если же флешка оказалась чистой, на ней отсутствуют вирусы, можно продолжать искать проблемы в другом направлении.
На просторах интернета, откуда чаще всего скачиваются и записываются аудиофайлы, музыка может быть представлена в любых форматах. Прежде чем записывать музыкальные файлы на флешку, важно убедиться, что такой формат будет успешно считываться вашей магнитолой. В большинстве случаев легко воспроизводятся файлы с расширением MP3. Закачивая другой формат аудиофайла, не следует его поспешно записывать на съёмный носитель. Можно его предварительно подвергнуть переформатированию, тогда ошибка 23, связанная с отказом флешки на магнитоле Пионер, может быть устранена или предотвращена.
Повлиять на отказ воспроизводить музыку может и такая банальная причина, как неправильная запись названия файлов. В частности, некоторые магнитолы способны реагировать только на кириллицу, тогда как другие, наоборот, на латиницу. В этом случае полезно обратить внимание, какая музыка воспроизводится, а затем по аналогии переименовать те файлы, которые запустить на воспроизведение было невозможно.
Совсем не мешает владельцу автомагнитолы исследовать и само воспроизводящее устройство, и флешку. Часто причиной выступают механические повреждения, неисправность разъёма. Такие технические неисправности лучше перепоручить тем, кто имеет достаточный опыт в ремонте таких устройств.
Если магнитола Пионер не читает флешку, появляется «Ошибка 23», обратите внимание на объём съёмного накопителя. В большинстве случаев автомагнитолы готовы «сотрудничать» только с накопителями, объём которых не превышает 4 Гб. Если же у вас в наличии имеется более продвинутый вариант, не следует огорчаться, можно применить некоторые хитрости, разбив накопитель на секторы, тогда ваша «крутая» флешка станет успешно адаптированной под магнитолу.
ВАЖНО. Проблема может заключаться и в том, что вы отформатировали съёмный накопитель не в том формате, который способна отображать автомагнитола.
Форматирование съёмного накопителя
Последние поколения флешек сопровождаются форматом NTFS. К сожалению, автомобильные магнитолы не могут распознавать такой формат, поскольку они ориентированы только на FAT16 и FAT32. Даже такое банальное несоответствие форматов способно спровоцировать возникновение ошибки 23.
К счастью, решить такую проблему совсем просто. Для этого потребуется просто отформатировать съёмный накопитель, воспользовавшись компьютерной техникой.
Флешку нужно вставить в USB-разъём, после её отображения в диалоговом окне «Компьютер» кликнуть по ней правой клавишей мышки. В открывшемся меню следует перейти на параметр «Форматировать».
После открытия окна форматирования важно внести желаемые изменения. В частности, выставить формат FAT16 или FAT32. Конечно, такой процесс не только переводит съёмный накопитель в другой формат, но ещё и полностью её очищает, удаляя все файлы, которые на ней сохранялись до начала процесса форматирования.
СОВЕТ. Учитывая это, важно предварительно перебросить на компьютер те файлы, которые вам больно будет потерять и тем более довольно сложно восстановить.
В строке «Размер кластера» лучше всего выбрать параметр «Стандартный размер кластера», после этого нажать на кнопку «Начать». Утилита вас предупредит, что будут потеряны все файлы, соглашайтесь с этим предупреждением и подтверждайте продолжение её действий. Через небольшой промежуток времени на экране появится новое окно с надписью «Форматирование завершено».
Теперь на такую подготовленную флешку следует записать музыкальные файлы в правильном формате, после чего вставить съёмный накопитель в USB-разъём автомагнитолы и наслаждаться прекрасным звучанием музыки.
Итак, процесс устранения ошибки 23 не такой уже и сложный. Достаточно внимательно изучить полезные рекомендации, выполнить последовательно рекомендуемые действия и порадоваться отличным результатом, к которому именно вы приложили собственные усилия.
| Author | Message |
|---|---|
|
Post subject: Please help to repair my WD400 HDD
|
|
|
|
Hi, My WD400 Western Digital HDD is damage and I need help to recover important data. This is what happened: I was using the PC when it freezed so I had to Swith it OFF. When I turned it back ON, it boots no more saying «insert system disk….». I went to the BIOS and HDD is still recognised, so I put it to another working PC as a secondary master, went to BIOS of the other PC and the HDD is recognised as secondary master and it also recognised by windows as a new HDD. However, I can’t see it listed on «My Computer». I ran «disk management» utility and it only listed my primary hdd. I confirmed that my WD400 is listed in the «Device Manager» as «WDC «WD400EB 00CPF0», why it is not listed in disk management? Please help. Thanks in advance, Garry |
| Top |
|
 |
Posted: July 23rd, 2007, 3:20 
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Hi Garry, It is not listed because probably the boot record somehow got corrupted. In order to get your data back, you can try to edit the boot sector manually (very difficult and only for experienced people) or you can use some of the commercially available programs to recovers files from a lost partition. Mostly you can download a demo-version so you can verify if it can find your data back. It is also possible your harddisk developped bad sectors, and in that case you better contact a datarecovery company. Best regards, Dobre _________________ Datarecovery in Belgium, Holland, France and Germany |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Hi Dobre, _________________ |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Correct Amarbir, I overlooked that. I cannot think what could cause this, except perhaps SA problem. Dobre _________________ Datarecovery in Belgium, Holland, France and Germany |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Sometimes ..but not always ..disk management will not show an un-partitioned drive .. |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Or is sector 0 is bad, this can occur. Download a demo of something like «GetDataBack», see if that can see it. _________________ New!! HDD-PCB.COM for all your PCB and donor HDD requirements! |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
dobrevjetser wrote: Sometimes ..but not always ..disk management will not show an un-partitioned drive .. How can I check the partition table if the disk is not listed in the disk management utility? It is something very strange and it’s one of a kind problem I encountered. Normally, if BIOS recognised the disk it should be listed in the disk management but not in this case. I’m a bit convince with pcimage comment about damaged track 0, I will try «GetDataBack» and let you guys know the result. Thanks for all your inputs. |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
you can also get ntexplorer also from runtime. |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Hi i Disagree, _________________ |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Amarbir wrote: Hi i Disagree, You are right Amarbir, it should show in Disk Management…. that’s why i said it is one of a kind problem that I encountered. I have tried it on 3 different machines but all of them detects it in BIOS and listed in Device Manager but not in Disk Management. Strange isn’t it? Regards, |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Hi, I tried GetDataBack, it reported an error on Track 0 and didn’t identified any file….Any other suggestions? Regards, |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
get data back has a opetion of partial scan. run from some sector 10000 and see if it scans this hard disk. DF |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
This is what I get when on partial scan: «I/O Error Unknown error (27) reading sector 10000 on HD 129: Do you want to continue?» If I continue, it says this message on each sectors: «Error 27 in HD129. During ReadLba: LAB=<sector number> CHS=-lx-lx-l, Cnt=64» Does it mean that all sectors are damage? Regards, |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Run A scan with MHDD and check all your sectors |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Steve wrote: Run A scan with MHDD and check all your sectors MHDD can’t recognize the drive parameters and end-up with «Drive is not ready» error. Garry |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
did you set drive as secondary master? |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Steve wrote: did you set drive as secondary master? Yes, the Jumper is on PM2 and detected as Secondary Master in the BIOS. Regards, |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Hmm, could be that the translator and/or P-List is unreadable/corrupt. I wouldn’t really recommend you buggering around with that, unless you havethe right tools and knowledge. Where are you based? pcimage _________________ New!! HDD-PCB.COM for all your PCB and donor HDD requirements! |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
Hi pcimage, can it be fixed by replacing the board? Im in Brunei Darussalam. A part of southeast asia. |
| Top |
|
|
|
|
Post subject: Re: Please help to repair my WD400 HDD
|
|
|
garrys wrote: ..can it be fixed by replacing the board? …… no… |
| Top |
|
|
-
#1
I might’ve made a big mistake by running clean in diskpart. Right now I can’t do chkdsk or use a recovery tool on it because it has no letter and trying the mountvol trick returns «The specified volume name does not have a mount point or drive letter.».
The HDD is recognized by BIOS and disk management, as well as pretty much any other tool. It’s not showing up on my computer though (I’m assuming I messed it up with diskpart clean).
I would like to recover some data from it, specifically a few text documents. If I can recover other files that’d be great.
I’ve pretty much ran out of options at this point, tried many solutions but nothing seems to work for me, primarily because this error is not letting me move forward.
I’m certain it is a problem with the hardware and there are a lot of bad sectors as it seems. The thing is, there are also a lot of good sectors. Can I recover the data from them? If it’s a good sector it means the data hasn’t been corrupted on it and it’s still there?
I’m currently running a surface test on hard drive sentinel to see how bad the situation is, but I’m not sure what I’ll do with that information.
Also when I tried to reinstall WIndows it says that my hard drive has 100% free disk space. Did the files get erased? Even if that’s the case, I think I might be able to recover something if I’m lucky as long as I get this error out of the way.
Please help!
-
- Jul 30, 2014
-
- 6,758
-
- 3
-
- 45,960
- 3,002
-
#2
I’m truly sorry to hear about your issues, but I’m afraid that you might make things worse by attempting to retrieve the files by yourself using third-party apps. If the problem is hardware-related and there are too many bad sectors, I’d strongly recommend you to consider contacting a professional data recovery company for assistance. They would be your best bet on getting any of those files back.
If you did use the DiskPart/Clean command, it means that you have formatted any wiped the HDD clean. You could definitely try with the data recovery attempts but at your own risk and I’d strongly advise you find out what is the SMART status and health state of the HDD first!
Even if there are good sectors on the drive, it doesn’t mean that the files would be usable or even there. The way data is stored on the HDD sectors, there is a big possibility that most of the files could be corrupted just because a piece of them had been stored on a bad sector.
Please consider a professional assistance. It sounds like the damage on the HDD is too severe to deal with it by yourself.
Let me know if you have additional questions! Best of luck!
SuperSoph_WD
-
- Jul 30, 2014
-
- 6,758
-
- 3
-
- 45,960
- 3,002
-
#2
I’m truly sorry to hear about your issues, but I’m afraid that you might make things worse by attempting to retrieve the files by yourself using third-party apps. If the problem is hardware-related and there are too many bad sectors, I’d strongly recommend you to consider contacting a professional data recovery company for assistance. They would be your best bet on getting any of those files back.
If you did use the DiskPart/Clean command, it means that you have formatted any wiped the HDD clean. You could definitely try with the data recovery attempts but at your own risk and I’d strongly advise you find out what is the SMART status and health state of the HDD first!
Even if there are good sectors on the drive, it doesn’t mean that the files would be usable or even there. The way data is stored on the HDD sectors, there is a big possibility that most of the files could be corrupted just because a piece of them had been stored on a bad sector.
Please consider a professional assistance. It sounds like the damage on the HDD is too severe to deal with it by yourself.
Let me know if you have additional questions! Best of luck!
SuperSoph_WD
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
T
|
Question adding a new M.2 SSD to my motherboard causes PC to receive a boot error | Storage | 6 | Feb 1, 2023 |
|
|
[SOLVED] Repairing Disc Errors This May Take Over an Hour to Complete? | Storage | 22 | Jan 31, 2023 |
|
R
|
Question Seagate HDD in intermittent state (can’t initialize) (I/O ERROR) after I cancelled their software’s sanitization progress | Storage | 0 | Jan 26, 2023 |
|
D
|
Question Standard NVM Express Controller error — NVMe drive not detected in BIOS ? | Storage | 2 | Jan 14, 2023 |
|
S
|
[SOLVED] Is there a way to fix HDD CRC error | Storage | 1 | Jan 2, 2023 |
|
J
|
Question Really struggling to clone my hard disk on to SSD with Macrium Reflect , Error 0 and 23 | Storage | 9 | Dec 8, 2022 |
|
I
|
Question Why do we erratically get BSOD 14c error only on multiple HDD/SSD, with M.2 SSD as Boot drive ? | Storage | 5 | Dec 2, 2022 |
|
|
Question HDD i/o error | Storage | 2 | Nov 29, 2022 |
|
T
|
Question Whea uncorrectable error Stop Code Bluescreen | Storage | 3 | Nov 24, 2022 |
|
|
[SOLVED] Uninitialized Disk — Cyclic Redundancy Error | Storage | 10 | May 14, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics